IPod 10GB 3rd Generation

Hey All!
My roommate just purchased a 3rd Generation 10GB iPod off eBay and nothing seems to happen. Do you know or have any suggestions for him? If so, great! If not, no worries. I have tried reseting it, using my AC adapter with it, etc. Looking forward to suggestions. Thank you in advance.
PowerMac G5, PowerBook G4, Apple iPod 5GB, Apple iPod 2GB Nano, Apple iPod 30GB Photo   Mac OS X (10.4.8)  

Just in case, the buttons you need to press for 3G (Resetting) are different from other models, have a check
http://docs.info.apple.com/article.html?artnum=61705
and iPod (dock connector) will not charge over USB 2.0. Charging this unit requires a built-in 6-pin FireWire port or the FireWire iPod Power Adapter.

Similar Messages

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

    Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

    Try here:
    iPod touch: Hardware troubleshooting

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

    I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

    Save all the photos from your Droid into a folder on your computer.
    Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab.  Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos.  Then click the SYNC or APPLY button on the lower right window.

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • The backlight on my ipod touch 3rd generation will not come on, but everything works perfectly. I even used the advice given on the tech support page, and it still will not come on. HELP ME PLEASE.

    The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPod Touch 3rd generation is not turning on and gets really hot when I plug it in but is not charging...

    I have an iPod Touch 3rd generation and yesterday I was using it and noticed that it reset to a different time zone and when I dug a little deeper realized that it reset the date to December of 1969. I just went in and changed it all back. I was out of the house all day today and didn't take it with me, when I went to use it, it wouldn't turn on. I assumed it was dead, so I plugged it in and got ready for bed. I realized that the charging screen never appeared and it never made the little noise it does when you plug it in. I picked it up and right near where the charger plugs in, it was very hot. I use it when it'd plugged in from time to time and it is NEVER that hot. I then tried to plug it into the computer where it again didn't do anything and didn't show up as a device that was plugged in on my iTunes. Again, it got very hot very quickly. I am using the cord that came with it and an actual Apple brand wall charger. I don't know what else to do. Some people said to hold the two buttons down for a little bit, but nothing happened on mine. Please help!

    Warm is normal, too hot to handle, literally, is not.
    If you're concerned, make an appointment at your local apple store and have them check your charger out.

  • Ipod touch 3rd generation will connect to my wifi for a few seconds and then nothing will load. help please?

    I have an ipod touch 3rd generation 64gb and it has iOS 5.1.1 and it will connect to my WiFi for a few seconds and then nothing will load. It says I have full connection bbut nothing works. I have 2nd generation ipod and it connects fine. Along with my laptop and xbox 360. I have tried downgrading it and restoring it from itunes. I also tried forgetting the network and inputting it myself but it sti does the same thing. I even tried resetting my wireless modem but it still didnt make a change. I really could use some help. I can't call apple cause im no longer under warranty.

    Reset the iPod and connect to its syncing computer.  It it shows in iTunes restore the iPod.
    Next see if placing the iPod in recovery mod will allow iTunes t see the iPod so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Ipod touch 3rd generation wont turn on or reset or connect to itunes! HELP!?

    my ipod touch 3rd generation wont turn on. it wont reset or connect to itunes either and nothing i have tried so far has worked.

    i am having the same issure and i did put it into recovery mode and itunes tells me to restore, but when i click restore it tells me that "software for this iphone is not currently available. make sure you have the latest version of itunes and try again" but it's obviously not an iphone.

  • HT1353 My iPod touch 3rd generation wont turn on or charge

    My iPod touch 3rd generation wont turn on.. I plugged it in my laptop and desktop immediately, but nothings chage.. I also tried to open in iTunes but my iPod is not working.. What I am going to do now?? Help me please!

    Try:
    iOS: Not responding or does not turn on

  • IPod Touch 3rd generation not recognized in iTunes

    I just recently upgraded my Macbook software to version 10.6.3 because I purchased an iPod shuffle and the newest version of iTunes would not install with my old software. Now my iPod Touch 3rd generation is not being recognized by the newest version of iTunes (10.2). I have already restarted my computer, and shut it down and removed the battery for a minute before starting it up again. None of these things worked. This is the first time I have tried to sync my iPod touch since installing the new software so I am not sure what I need to do.

    It sounds like this may be the fix:
    http://support.apple.com/kb/TS3540
    (Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

  • HT2305 Since updating my laptop from Windows Vista to Windows 7, my Ipod Shuffle, 3rd generation does not recognize last 3 playlist names; it calls them out as "playlist 3, playlist 4 -- even though in the panel the names are showing just fine. The music

    I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.

    From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
    So you'll want to make sure VoiceOver is enabled to correct this.
    B-rock

  • Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

    Itunes for Windows and PC will not recognize my ipod touch 3rd generation.  Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled.  I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

    the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

  • Why will iTunes v. 8.0.2 not load my songs to my iPod Classic 3rd generation ver. 2.3 using OS 10.5 ?

    Problem: iTunes does not automatically transfer my songs to my iPod.
    I have an iPod Classic 3rd generation v.2.3, it has a 20GB capacity, I'm using iTunes 8.0.2 and am connected to a Mirror Drive Door 1.25 GB DP running OS 10.5. I am using the Firewire Dock to communicate with my Mac and to charge/power my iPad.
    It has a bad battery, however, it still holds a charge. I've been able to reset the iPod. I do not have the installation disk. The iPod does cause iTunes to open. The iPod shows up in the iTunes sidebar. It shows that it has checked for updates. However, I'm using a dial-up connection and thus, it will not finalize a connection with Apple to do the RESTORE. My problem is that according to the manual any songs in iTunes will download to the iPod automatically. Well, it does not do that. In fact, I have seen no evidence that that downloading process has ever been initiated. I have connected the iPod at least a dozen time with the the dock plugged in when placing the iPod into the dock. I've also plugged the Firewire connector into the port on my Mac with the iPod already in the dock. 
    Am I missing some step or some setting  that I have to do manually for the transfer from iTunes to the iPod to take place?
    Anyone have any ideas, I would appreciate assistance from my fellow Mac compatriots for your  help with this problem.

    Thank you so much! It's updating now. I'm hoping that once the update is finished that it will sync like normal as well. Of course I'm still a bit confused/concerned about how it refused to update on it's own, but for now that's not a problem. Hopefully from now on there won't be any more problems.

  • Connecting an iPod nano (3rd generation) to Windows Vista

    I have purchased an iPod nano (3rd generation) and I tried to connect it via USB to a Windows Vista Enterprise Laptop. Even though the iPod is connected (as it appears on the iPod screen), Windows fails to locate the driver to install it. I have tried several articles found in the discussions forum, reseting the iPod nano, re-installing iTunes, and rebooting Vista, but no solution given.
    Please advise.
    Thanks

    Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

Maybe you are looking for

  • UAC allowing standard domain user to elevate without providing credentials

    I don't understand how this is occurring. We created a test user on our domain. Its only group membership is Domain Users. UAC is behaving quite different depending on which computer we test the account on. When I login to my computer with the test u

  • Use a Iphone 4 unlocked from US in another country?

    Hi everybody! I'm in the US for the moment but i will come back in France in 3 months. I would like to know if i can buy an unlocked iphone in the US and use it after in France with my french SIM? =)

  • Error when hitting peoplesoft server:

    Hi All, I am trying to hit people soft server using JDBC communication channel. XI Version is 3.0...i am using below parameters as the backend of peoplesoft is ORACLE, JDBC Driver :    oracle.jdbc.driver.OracleDriver Connecttion :    jdbc:oracle:thin

  • 10g Datagaurd

    Hi, Can any one tell me how to configure the 10g datagaurd with enterprise grid control. i install the 10g on windows on one PC and Grid control on other PC. So how to i use the grid control to configure the Datagaurd. Regards

  • Proof of Concept Thunderbolt backdoor

    Hello Community, I've red today an Article (http://arstechnica.com/security/2015/01/worlds-first-known-bootkit-for-os-x-can- permanently-backdoor-macs/) that explains an infection about thunderbolt  devices. I know that you need physical access to co