IPod_13.1.2.ipsw

Hi!
I want to revert my iPod from 1.2.2 to Version 1.2.
Unfortunately I don't have the required files (iPod_13.1.2.ipsw and iPod_13.1.2.ipsw.signature) anymore.
Does anyone have those 2 files? (Or know, where to get it)
Thanks!

Do you want 1.2 or 1.2.1?
Apple have removed the 1.2.2 update so if you go into iTunes to restore your iPod it will reload the previous software version 1.2.1.
Of course a restore will revert the ipod back to factory settings so you'll need to reload the music.

Similar Messages

How can I update my iPod classic that will not mount on iMac computer?

I can't update my iPod classic from my iTunes on my iMac computer with OSX 10.9. It will not mount or be recognized by iTunes version 12.1.
I plug it into the USB port and it charges, gives the "Do not disconnect" symbol but the computer does not recognize or mount the iPod at all. I haven't been able to update the music for years. I have four other devices associated with my Apple ID for automatic downloads. Is it too antiquated to upload any of my music from my computer to it anymore?

Ahh! The plot thickens!
I went thru the console and read the error logs. It appears that the .ipsw file does load.....I think. It's been years since I spoke computer....
Here is what I got after double clicking the .ipsw file and iTunes opened:
2014-12-28 11:05:02.430 AM syspolicyd[450]: assessment granted for iPod_13.1.3.ipsw by _XProtect com.apple.message.domain: com.apple.security.assessment.outcome2 com.apple.message.signature2: bundle:UNBUNDLED com.apple.message.signature3: iPod_13.1.3.ipsw com.apple.message.signature5: UNKNOWN com.apple.message.signature4: 3 com.apple.message.signature: granted:_XProtect SenderMachUUID: C6FC6A41-170C-3D84-BAAE-6983F164E903

1.2.1 Firmware Causing Lockups

I had the crash during podcasts issue with 1.2, and I haven't tested if 1.2.1 fixed it... Because now it can't make it through 1 song without the screen and scroll wheel locking up completely! It continues playing whatever song it is on, then stops playing, and none of the buttons seem to work and the screen is completely frozen! The only action it seems to take is a restart (Menu+Center Button) when it locks up.
Anyone else seen issues like this with the 1.2.1 firmware upgrade?
I did a complete "Restore" also, and it's still locking up.
Is there any way to down-grade to the older firmware, my 60G iPod will only play one song now!!! Everything was working fine up until iTunes pushed this iPod firmware upgrade on me yesterday.

I found a site that may take me back to 1.2.
http://www.macintouch.com/readerreports/ipod/topic2401.html#dec31
Here's the text of what Paul Constantine found.
I have been able to "downgrade" my 1.2.1 firmware to 1.2, which does NOT list playlists with no content on my Pod. Keep in mind that we're talking about a "5.5G, video" model Pod). Here are some hints about doing it:
The actual updater files are located in:
~/Library/iTunes/iPod Software Updates/
Here are my file names:
iPod_25.1.2.ipsw.signature
iPod_25.1.2.1.ipsw.signature
iPod_25.1.2.1.ipsw
iPod_25.1.2.ipsw
I have "heard" that there can be "iPod_13.1.2.ipsw" files for the 1.2 update.
There are 2 tricks: first make sure ONLY the 1.2 files are in there. Second, you MUST disconnect from the Internet. There are many ways to do that, what I did was use System Prefs to turn TCP OFF, than log out and back in with the shift key held down. You will have to do a "restore" and go through the process of re-loading all content, but after dealing with some messages about a later update being available, you will end up back at 1.2.
However, another big barrier is whether you HAVE the right files to revert. Obviously, Apple won't provide older versions. The only real reason I HAD the 1.2 files was because I did try a full restore (the first day I had the Pod) to maybe correct another annoying bug; if I hadn't done that I would have had to search "other" sources for the files.
I haven't tried it yet. When I do, I'll try to post an update.

Updating iPod to 1.1.2

I recently updated iTunes to 7.0. Now whenever I connect my iPod, it asks if I want to download and install the latest iPod update. Since I am a Luddite and only have a dial-up connection, I went to my school and downloaded the update there. Now that I am home, I don't see a way to get the iPod to um, recognize the update software. When I double-click on the update file-iPod_13.1.2.ipsw- it launches iTunes, but does nothing more. Is there a way to do this? Am I missing something?
Any help is much appreciated.
Thanks

Whoa, way old question that I had lost track of. Anyway, not a problem anymore, as I figured it out.

How can I update an iPad to IOS 7 when the .ipsw is already in the software updates folder?

I have already upgraded one iPad to IOS7 from iTunes. The .ipsw file is still in my ~/Library/iTunes/iPad Software Updates folder. Why, when I attempt to upgrade a second iPad, does iTunes want to start downloading it yet again? It's already there. Brain damage in iTunes? I have to limit my download activity due to my ISP (can't get another one yet).
Thanks!
Gary

Please ignore this discussion. Problem resolved.

I can't update to iOS 7 with ipsw

Helllo,
I have a white iPad and I'm having trouble trying to update to iOS 7 using a ipsw file with iTunes. I don't want to do it OTA because I want to upgrade to that specific version. I have iOS 5.0.1.
Everytime I try to upgrade I get the 3194 error. I tried reseting the hosts file but I still get it. I also tried running in DFU mode but it gives error 4004 instead.
I also tried Tiny Umbrella, (a program someone suggested to use) But instead I get error 11!
Please help me!
Thank you!

Apple only supports the latest version of iOS available for that device.
As stated above-Apple is not signing earlier versions any longer.
You can not install older versions.

What happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but no help

what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
plz help

If you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
Message was edited by: King_Penguin

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?

No, you cannot downgrade your iOS device. That's not supported by Apple.

My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do i restore my phone using the ipsw from an external hard drive

I am currently deployed to Afghanistan and don't have very good signal. One of the guys thought it would be funny to change my passcode, and then forgot it. Now my phone is disabled, and the computer I used to set it up is in the states. The signal here is too week to download the Iphone update software via iTunes(keeps losing signal partway through and restarting the download). Its 802MB so I spend seven hours at the computer lab to download the ipsw to an external hard drive. I used the instruction I found via google to restore the phone, and its not working. Itunes keeps trying to download it again. Not sure how to make itunes read the downloaded version. Also its not my computer, so I logged into my apple ID on his itunes. Does this create part of the problem. When unzipping the file some of the files were encrypted. Maybe thats part of the problem?
Please help if you can.

Hi joehazelton,
If you have already got the ipsw file, (assuming that it's a latest version or the version on your iPhone at least), you can try the following:
If you are using a Windows 7 PC:
Go to C:\Users\%username%\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
If you are using a Windows XP:
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
If you are using Mac:
~/Library/Application Support/MobileSync/[can't recall the folder name]
Once you locate this folder, copy the ipsw file to this location. Then try to restore your iPhone.
Please post your feedbacks!
-aneesh-
www.sarayoo.info

Upgrading from 8.1.2 to 8.3 via IPSW Bricked 6 Plus.

By bricked I mean, I can get the phone into DFU mode but as soon as the restore starts my phone gets stuck in recovery mode.
I have 6 plus that was on 8.1.2 I downloaded the IPSW for 8.3 (the corrects 6 plus version)and tried to install it via option+restore, I got error 14. I couldnt download through iTunes because of slow internet, it kept timing out. Phone bricked and has been ever since my first attempt to restore/install. But i don't always get error 14, sometimes the phone freezes on the restore progress bar for hours.
iTunes is updated. My laptop has not been updated to 10.10.3. I have extremely slow internet and whenever I try the download through the App storeit fails, then it starts from the beginning when I try again. I was able to download from the Apple website (not the combo update) but when I tried to install i get a message saying "OS X Update can't be installed on this disk. This volume does not meet the requirements for this update". My mac is currently on 10.10.1.
Sometimes it hangs up very early in the process. Most of the time i get error 14, sometimes I get error 9. I have also tried this on the windows side of my laptop using VMWare and also got error 14. I'm in Afghanistan with no access to an Apple store and sure they may send me a replacement but that would take 10-14 days minimum so I'd like to exhaust all options before going that route.
Would updating to 10.10.3 make that much difference?
if so, whats up with the error saying it can't update the OS X?
would downloading 8.3 from iTunes make a difference?
Thanks for your help.

the combo update for 10.10.3 worked. still getting error 14 (USB) or it freezes very early in the process

I have iPhone4 and Windows 7 Home Premium. My iphone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_restore.ipsw and I received a 3002 error. Exhausted trying everything

I have iPhone4 and Windows 7 Home Premium. iPhone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_Restore.ipsw and I received a 3002 error. Sync seems to work OK. Have exhausted the online discussions and tried everything. Please help

Try runing iTunes in admin mode. That fixed the issue for me. You can either right click on the shortcut on your desktop and choose to run as an admin each time you launch it or go to the advanced tab under security on the program itself and click the run as admin every time.

ITunes keep showing unknown error 48 while restoring iphone 4s. I've already followed applesupport suggestions of reinstalling iTunes, deleting previously downloaded ipsw on my computer and re-downloading it (countless times!) but still to no avail.

Hi. A very much help needed.
- iTunes keep showing unknown error (48) while restoring my iphone 4s
- I've already re-install iTunes various times
- Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
- Changed and edited hosts in windows drivers as per shown on guides
but... to no avail!!!!
I am now without any phone to be used.
HELP ME PLEASE

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

HT4623 How can I get a copy of 5.1.1 IPSW for my iPhone?

How can I get a copy of 5.1.1 IPSW for my iPhone?

You can't. Apple is no longer signing iOS 5

Where to find IPSW file on Windows 7

Where on my windows 7 laptop, I can locate IPSW files. I have downloaded firmware on D drive. I have iPad 3 with iOS 5.1.1 version.
Thanks

Connect the iPad to the PC, open iTunes on the PC, right click the name of the iPad in the iTunes' devices list and chose update. In the resulting pop up window, browse to where you downloaded the ISPW file on the D drive and choose it. ITunes will then handle the rest of the process.

IPod_13.1.2.ipsw

Similar Messages

Maybe you are looking for