IPod 1st Generation (2001) doesn't show up on computer
I have an iPod M8541 1st Generation clickwheel, Firewire400. It is working fine, but I haven't updated the music on it for years - and now it doesn't show up anymore.
First it doesn't show up in the Finder, and is not being found by Disk Utility. When I connect it via another Firewire device it shows up in the Finder, but not in iTunes.
I tried to find an update that can be done without iTunes, and downloaded iPodUpdater2006-01-10, but when I ran the installer it said it was already installed.
Downloaded iTunes 6.0.5, but this one can't open because my iTunes-Library is too new. I could trash my Library and re-install an old iTunes, but I'd be very thankful for any suggestions before doing that...
Thank you!
Thanks for the kudos - I love this pod! Not too cool for old school
Unfortunately my MacBook Pro doesn't have Firewire400, only 800, while the iPods only outlet is a 400. (Are there cross cables?)
So I can't try it on another Computer, but I did try different FW-cables on my iMac Intel DuoCore with Mac OSX 10.6.8.
The Pod is fully charged.
The other FW-device was a 20GB LaCie Pocket-Drive, and I've also tried it now on a LaCie d2 Quadra with external power, which has both FW-plugs. It does show on the desktop and in Disk Utility, but not in iTunes.
I just sold my old iBook, could have tried there.
I'm pasting the info System Profiler shows, it's in German but the important stuff should hopefully be decipherable:
iPod Unit:
Softwareversion: 0x10483
Spec-ID: 0x609E
Firmware-Version: 0xA2700
Version des Produkts: 1.10
Untereinheiten:
iPod SBP-LUN:
Kapazität: 5,01 GB (5.007.744.000 Byte)
Wechselmedien: Ja
BSD-Name: disk3
Partitionstabellentyp: APM (Apple Partition Map)
S.M.A.R.T.-Status: Nicht unterstützt NOT SUPPORTED
Volumes:
Kapazität: 32 KB (31.744 Byte)
Beschreibbar: Nein
BSD-Name: disk3s1
Kapazität: 33,5 MB (33.524.224 Byte)
Beschreibbar: Ja
BSD-Name: disk3s2
iPod:
Kapazität: 4,97 GB (4.974.187.520 Byte)
Verfügbar: 9,9 MB (9.879.552 Byte)
Beschreibbar: Ja
Dateisystem: HFS+
BSD-Name: disk3s3
Mount-Point: /Volumes/iPod
Any idea besides downgradig iTunes? Thanks a lot in advance!
Similar Messages
-
1st generation ATV doesn't show as a device in iTunes?
My 1st gerneration apple tv will not show up in itunes. I have gone into my prefrences to try to select it there, but it doesn't show up. I have checked my firewall as well, it is turned off. My ATV is connected to the same network as my macbook. I can view movie trailer and youtube on the ATV, so it is not a network problem. Is there something else I can try?
Quit iTunes, restart the iPad and reboot your Mac and then try again.
Then look here for additional help if that doesn't work.
http://support.apple.com/kb/TS1591?viewlocale=en_US
http://support.apple.com/kb/TS3540 -
IPOD 1st generation recognized in iTunes but not my computer
I have a Windows XP.
When i plug in my ipod, everything seems fine, it shows up in my computer, and after a couple minutes, iTunes comes up an it shows up fine in there too. A couple minutes after that, Ipod disappears from my computer. When i try to put songs on it, itunes tells me that "the disk cannot be read or written to." It wont update the ipod either, even though itunes keeps telling me there's new updates for the ipod.
I've tried, restarting the computer, reinstalling itunes, reinstalling the ipod, reinstalling the usb port drive, and charging the ipod for hours on end etc. I'm not getting anywhere.
Can someone help me?Somebody please respond to this! I'm having the same issues.
-
Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
I have an ipod 1st generation that i recently factory reset
i have an ipod 1st generation that i recently factory reset, when I turn it on it says (itunes symbol <-- USB cord) as if i should sync with a usb to my computer to itunes... i did that and nothing happens- my itunes is not showing it all, there isnt a device button like with my iphone. My computer (PC) does recognize that i plugged it in with the USB bc i can pull it up in "This PC"
You should also know that it (the ipod) hasnt been updated system wise in years... so i dont know if that means anything... HELP ME!
i want to keep all my music on the ipod so i dont take up all my storage on my iphone.. THANKS!The iPod is already erased.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable (not necessary if using same cable that works for other devices)
- Try on another computer (not necessary since other iOS devices connect.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod 1st generation not recognized on mac
Why can't I get any help with my iPod 1st generation? I DO NOT BELIEVE this is just a coincidence that my old iPod stopped working the minute I installed the newest iTunes. I have talked to apple and they say that it is my old ipod which is no longer under warranty. Are they kidding? Do they think I'm just going to go out and buy a new iPod?
I have downloaded the Shuffle Reset Utility but it
does not recognized my iPod. I have switch USB ports
numerous times. restarted my computer numerous times
and had an online chat with an agent at Apple that
lasted about 4 hours and I still can't get my iPod to
work.
I had no problems with my ipod until I downlaoded the
new itunes. My Shuffle 1st generation is 18 months
old and no longer under warranty. Am I supposed to
buy a new iPod everytime Apple updates their software?
Given that the warraty ran out on it 6 months ago, and you appear to not have extended it through AppleCare, you're out of luck UNLESS you can resucitate your Shuffle.
ALL Of the things you've stated as having done don't include enough detail to let anyone HERE help you. Grousing about a dead Shuffle isn't giving us much of a foundation to work on.
NOW, does it charge (front LED lights orange) while plugged into a USB port? IF NOT, does it charge in a USB port on another computer? IF NOT... it D e a D. -
i locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help
If you have tried everything, then by definition, there is nothing else to try.
Perhaps if you explained what you tried someone can help.
If you have actually tried everything, then there is nothing anyone can do to help.
Did you try reset?
iPod touch User Guide (For iOS 4.3 Software) -
My ipod touch 4th Gen doesn't show me the music and videos
My ipod touch 4th Gen doesn't show me the music and videos I have, even though I can see it all in the I tunes and I can see that the ipod memory is full as it was... What to do???
ThxNot compatible.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory. The 4G only has 256 MB -
How do i update a ipod 1st generation ?
How do I update a ipod 1st generation or 2nd generation ? MB528LL
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage -
any ideas how to fix an ipod 1st generation. all works fine but no sound from the earphones(no external speakers)
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
I is likely not worth it to get the iPod fixed. -
I didn't receive any news about the replacement program for the Ipod 1st generation. I have already sent the serial number online, but didn't have any progress. What should I do? Thank you
After you set up your service use your repair ID to track your replacement here:
https://selfsolve.apple.com/repairstatus/main.do
Remember: You will receive a replacement unit approximately 6 weeks after Apple gets your current iPod nano
Hope this helps.
-Julian -
How do I get the music from my iPod 1st generation onto my iPhone 4... the problem is the music is not on my iTunes library and will not swap over? HELP please x
See this post by forum regular Zevoneer on transferring files from the iPod to your computer.
tt2 -
Hi there, is it ok to use an ipod 1st generation charger to charge my iphone 4s?
Hi there, is it ok to use an ipod 1st generation charger to charge my iphone 4s?
Thank u, i meant to ask about the ipod nano 1st gen. Charger.", is it ok to use that to charge my iphone 4s? It fits but Given the problem ipod nanos 2005-2006 had and the replacement program i was wondering
-
Ios 5 on ipod 1st generation?
Hiya. I would like to download some apps, but it always says that my ipod needs to download ios 5 or ios4.3 on my ipod touch 1st generation. I would really like to download this ios 5, but I don't know how. I hope it is able to be downloaded on ipod touch 1st generation. I am a happy customer and I love my ipod, I just want to be able to have some apps. Please make it possible to download ios 5 on my ipod 1st generation. I don't think it is fair that people with the ipod touch 1st generation cannot download the ios 5. If this could please be downloaded on the older generation ipod I would be a even happier customer. Apart form this I am happy with everything else on Apple. Thank you for taking the time to read this.
The 1st generation can not be upgraded beyond iOS 3.1.3
The 2nd generation can not be upgraded beyond iOS 4.2.1 -
Hello. I have iPod 1st generation. It's on recall program. Which kind iPod I receive for replacing?
Same model, with same capacity. Only certain serial numbers qualify. If your iPod is registerred, you should have received an email from Apple.
Maybe you are looking for
-
I have no sound on dv8000. Moved to Windows 7 64 bit. Windows XP was on very shaky ground (error messaged-No multi media controller's). Also, need mass storage controller driver. Where can I obtain the compatible drivers. It would be nice if HP did n
-
I have adobe Acrobat 9 Pro. I would like to edit my email preferences so that when I create an email with the PDF as an attachment the name of the file will automatically also be the subject line of the email. according to the help instructions, I sh
-
Problems syndicating Vendor from MDM5.5 to BI via XI
Hello colleagues: So far I've been succesful when syndicating products from MDM 5.5 Material repository to SAP BW 3.5 using XI 3.0. We are using the standard business content for BW in BW as well as in XI, and the standard GenericProduct MAP. I've ac
-
Is there any method or function to update/modify an existing trip data?
Hey, ABAP gurus, Is there any method or function to update/modify an existing trip (PR05) receipts data and cost distribution data? Thanks in advance! Fisher
-
Hello, I need to change multiple Field Status Groups (65 of them - need to change a field from optional to required) for a Field status variant. I would like to know if there is a way to transport all the changes using a single transport request as e