IPod 2 can't stay connected to wifi after iOS6

I download iOS6, worked fine for a few hours. Went out to eat, came home and now it cant stay connected to the wifi. I have rebooted my wifi and my ipod already. It will connect and a few seconds disconnect and bring us a strange brower Apple page that says "hmmm the page you're looking fopr cant be found"
Please help! I have no way to connec it to the internet now

Have you tried connecting to other WiFi connections? If so does it do the same?
If not, it might just be to do with the amount of periphirals on your current router and subsequently your router is kicking off you iPhone.
Or you could try changing your broadcasting channel in your internet router settings and see if this fixes it

Similar Messages

  • Retina macbook pro can't auto connect to wifi after wifi router rebooted

    My macbook pro with retina can’t automatically connect to wifi after the wifi router was rebooted. There is exclamation mark on wifi sign. As I clicked the wifi sign, it shows no Internet connects. However, It is strange there is a tick in front of my wifi name. In order to use wifi, I had to click off wifi, and then click on. The previous version, Macbook pro, has no problem like this. I had deleted all files under wifi library, but still fail. Appreciating for any way to solve it!

    My macbook pro with retina can’t automatically connect to wifi after the wifi router was rebooted. There is exclamation mark on wifi sign. As I clicked the wifi sign, it shows no Internet connects. However, It is strange there is a tick in front of my wifi name. In order to use wifi, I had to click off wifi, and then click on. The previous version, Macbook pro, has no problem like this. I had deleted all files under wifi library, but still fail. Appreciating for any way to solve it!

  • IPod touch - not staying connected to WiFi

    Just bought an iPod touch for my daughter. It will not stay connected to wifi. Everyday we are having to reconnect and enter our password. All our other devices are fine (MacBook, iPhones, iPads etc). Any suggestions?

    Does the iPod connect OK to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPad 2 wont stay connected to wifi after iOS 6 update

    Since my latest update a few weeks ago, my ipad wont stay connected to wifi networks.  Has anyone found a solution to this? Why would the latest update have impacted this function?

    I tried the suggestion, from another post, to reset the network settings and that did not work.

  • Can't Stay Connected to WIFI with brand new MBA

    I just set up my new MBA, and cannot stay connected to wifi, no matter what I do. Sitting next to my MBA is my IPAD and IPhone which both show wifi connection working. I have followed the advice from the community posted in August ( wish I knew the MBA wifi problem before buying), with no luck. No other devices shows wifi connectivity problems, router works great, and I cannot download any patches due to connectivity issue.  UGH.  Any wisdom to share?
    Thanks

    Have you tried connecting to other WiFi connections? If so does it do the same?
    If not, it might just be to do with the amount of periphirals on your current router and subsequently your router is kicking off you iPhone.
    Or you could try changing your broadcasting channel in your internet router settings and see if this fixes it

  • Can no longer connect to WiFi after IOS 7 update

    I own a small hotel. After updating to the new IOS, no one can connect to the WiFi network on their iPads or iPhones.
    Help!

    Too little info here to work with however ...
    1. Go to SETTINGS on your iphone, then to WI-FI
    2. Can you see any networks listed? If not, then you have a problem with your Wireless Router. Reset it and see if it appears.
    3. If you can see the wireless network, try to connect to it manually. If this works, then off you go. If not, then you need to tell me what wireless router it is before we can go much further. Also, are any other devices connecting successfully (ie: pre-iOS 7 handsets, Macs or PCs)?

  • Can no longer connect to WiFi after iOS 6

    After updating my iPhone 3GS to iOS 6.0 not 2 hours ago, everything seemed fine - for about 30 minutes. I soon lost all connections to my personal WiFi router in my house (both of them, actually). For a short period of time I was not even able to find networks in Settings>Wifi, even when standing next to my modem & routers.
    No searches helped online, and Apple apparently doesn't believe in tech support emails, so I tried resetting my network settings. When I did that, it finally showed my 3 home WiFi networks. However, I'm no longer able to connect to them. When I click on one, it will take me to a "Log In" page at www.Apple.com, where it will say "Hmm, the page you're looking for can't be found" and send me back to the WiFi settings page, and put me on 3G.
    This is really starting to get on my nerves, and I understand new OS' can be buggy, but this seems like a bit too major of a screw up to be a simple bug.
    Any suggestions? If there's no way to fix it, Apple will have just lost another customer.

    Same thing here on all my devices. Basically it seems like there is a web page that the device attempts to connect to confirm internet connectivity after joining a WiFi network which seems to now be a bad link.

  • Why can't i connect to wifi after updating to iOs 6 on my iPhone 4s

    After updating to iOs 6 when I try to connect to my wifi network it pops up with the apple website and login and says the page you requesed cant be found on the pop up.??
    Confused.

    The Apple Support person walked me thru this.  If you have the classic 'greyed out' wifi problem with your iPhone 4s.  Very easily fixed:
    Read all instructions before starting:
    1.  Try to toggle on/off airplane mode check.
    2.  Try the old turn on/off trick.  Check.
    3.  Try resetting Network Settings.  Settings > General > Reset Network Settings  Check.
    4.  Ensure your phone is backed up to iCloud before proceeding.  Very important you do this.  Check.
    5.  Wipe your phone.  Settings > General > Reset All Settings.  Keep in mind this will wipe your phone but you have that iCloud back up.
    6.  Check if wifi is working.  No, then no prolbem:  You have the option to have your 4s fixed which is probably out of warranty.  No deal?  Ok, you have the option of purchasing a new phone?  Still no deal?  Proceed to next step if these options are no good and you decide to live without wifi.
    7.  Restore your phone from the iCloud.  Oh, you don't have wifi.  Then you can't restore your phone.
    This is where i got dropped off the bus.

  • TS1398 Iphone 4s will not stay connected to wifi after update

    I can see my network, it connects for a few seconds and then disconnects. This started after the update.  I have tried reseting the router, the phone..............everything 100X.
    All my other devices work fine and other types of phones can connect to my network. It's a specific problem wth this phone.

    Hello Danielle,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can't Stay Connected to Wifi

    I have no idea what's going on. Wifi works fine for my laptop and iMac, at full strength. On my iPhone 4S, the WiFi randomly disconnects and goes back to 3G every five minutes or so. Plus, it is NEVER at full strength. It is using the same settings with static IPs. What do I do?

    Have you tried connecting to other WiFi connections? If so does it do the same?
    If not, it might just be to do with the amount of periphirals on your current router and subsequently your router is kicking off you iPhone.
    Or you could try changing your broadcasting channel in your internet router settings and see if this fixes it

  • Cant connect to wifi after ios6 update

    The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
    Hmm the page you are looking for cant be found..
    Im seeing the same issue with peoples ipads.

    The IOS6 update seemed to go well, but I cant connect to my wifi on my 4S. The seems as if it is connecting the redirects to an apple.com log in page that says:
    Hmm the page you are looking for cant be found..
    Im seeing the same issue with peoples ipads.

  • Why can't i connect to my wifi after ios6 update

    why can't i connect to my wifi after ios6 update

    It didn't work for me either.
    My Apple store don't know the answer and have suggested that I connect to a computer and do a full reset and install iOS6 again.
    Not too sure how to do that yet.

  • My ipod touch wont connect to wifi after i reset the network settings

    my ipod touch wont connect to wifi after i reset the network settings

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

    I have several iPod touches and there is always one that cannot connect to wifi. after several weeks it usually rights itself. what is going on?

    Matthew...
    Try here > iOS: Troubleshooting Wi-Fi networks and connections

  • Can't connect to wifi after bootcamp

    ICan't connect to wifi after bootcamp.
    I install windows 7 on my MacBook Pro retina 15.
    Windows is staring up but I can't connect to network.
    It says I need a driver (network driver) how do I get it?
    But when I run the Mac with Macintosh HD all work normal.

    Did you follow the Bootcamp instructions and download and install the Windows Support software?

Maybe you are looking for

  • The second time when i print the report the page appear cut in the right

    hi, I created a report in Report Builder 6i. When i print the report appear well, but when i try to print the same report second time in the right of the page appears cut. Why? What should I do to appear the entire page at the second print? Thx.

  • XML into table: Why do all my insert values are NULL?

    Hello, I'm pretty new in XML ... then I still learn a lot by myself !!! I surfed to a lot of forums and examples .... I have a XML file. I built a XSL file in order to insert a part of my XML file into a table. The 2 files are loaded as CLOB into a D

  • Select Statement taking more time.How to improve the query performance.

    SELECT DISTINCT ORDERKEY, SUM(IMPRESSIONCNT) AS ActualImpressions ,SUM(DiscountedSales)AS ActualRevenue ,SUM(AgencyCommAmt) as AgencyCommAmt ,SUM(SalesHouseCommAMT) as SalesHouseCommAMT --INTO Anticiapted_ADXActualsMeasures FROM AdRevenueFact_ADX ADx

  • How we can find the eaxct time which pragram takes to run

    hi, i have written a program in two different ways. i wnat to check which one is taking less time. is there any way we can find out excatly how much time is taken by the rprogram to run when irun it using F8

  • Photomerge in CS3 - how to please!

    I have Photoshop CS3 and want to photomerge a couple of images with changes. I have tried the trial version in Elements and found it quite easy and user friendly. However I cannot achieve the same in CS3 and would like some instruction. Can anyone di