Ipod 20 gb click wheel

It use to work fine, but now it doesn't work. It had that folder thing pop up but then i reset it so the main screen comes up. Then I connect it to my laptop and the updater and itunes do not work and freeze.
I cannot update my ipod

Its a way of getting the post back to teh top of the list

Similar Messages

  • Cannot sync iPod with click wheel to iTunes...

    I cannot sync my iPod with click wheel to my iTunes on Windows. I have already attempted the five R's, multiple times, including restoring my iPod three times, and updating my iTunes software. But when I plug my iPod in, it takes forever to be recognized by iTunes, and just sits there, whizzing and clicking, with the "Do Not Disconnect" message blinking. After awhile, iTunes will download a song or two from my library, then quit. I often get a message that says my iPod is "corrupted." Help! How can I get my iTunes library back on to my iPod?

    I am having similar issues. I have received lots of advice, none of which work so far but there is lots to try here. Good luck!
    http://discussions.apple.com/thread.jspa?threadID=930956&tstart=0

  • IPod with click wheel not recognized by computer and doesn't show up in itunes. Have went through all the suggested tips and its not the cable.

    ipod with click wheel not recognized on two separate laptops. Checked the cable and newer ipod shuffle works fine.  Ipod will play already loaded music and play from a dock.  Have went through the 5Rs and still not working. Any help appreciated.

    Checked the cable and newer ipod shuffle works fine.
    You're not trying to connect the iPod with click wheel using the short USB cable for the iPod shuffle, are you?  If so, that won't work.  The shuffle uses its headphone jack for the data connection.  All other iPods use the dock connector, using a standard docking cable.

  • Ipod with click wheel. Windows displays device not recognized problem.

    I'm using a ipod with click wheel, and hooking it up through a usb 2.0 port with the stock cable.
    I keep getting a device not recognized message from windows, and the itunes software 8.xxxx does not recognize it even in diagnostics tests. Everything else is pass, except the ipod recognition.
    The battery needs to be charged, and is depleted but its not recieving a charge when plugged into the computer.
    Does anyone have a solution to this?
    Message was edited by: johnqthesne
    Message was edited by: johnqthesne

    If the iPod is not getting a charge through the cable (and the battery is depleted), it may not be recognized because the iPod has no power to do anything.
    I would say the problem is either a faulty dock connector on the iPod, a faulty cable, or a faulty USB port on the computer. You have probably tested the USB port possibility already by trying a different port (or trying another USB device on the same port), so I would try a different USB docking cable as the next test.

  • Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.

    Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.tnk

    By "charger," do you mean a USB power adapter that plugs into the wall outlet (used to "charge" the iPod), or are you asking about the USB docking cable that connect the iPod to the computer?

  • I updated my 20G iPod with click wheel and now it wont turn on all the way

    Ok so I updated my 20G iPod with click wheel with the latest version (three point something), and now when i try to turn it on, it shows the apple logo and then has a pic of an ipod being plugged into a power adapter being plugged into a wall socket. i have reset it about 40 times and it always does the same thing. i have tried to charge the ipod with my computer but it does absolutely nothing (i dont have a power adapter). Also, when i reset my ipod WHEN IT IS PLUGGED INTO THE COMPUTER, it shows the "Very low battery" picture.Also, my computer does not see the iPod in "my computer" or iTunes. I have another iPod, which works perfectly on my computer. I thank anyone who tries to help me.
    Windows XP

    You must have a charge of your iPod with an ac charger, in order to complete the Restore process.
    You can also charge your iPod with
    1. iPod car charger
    2. iPod speaker dock system e.g. iPod HiFi or Bose soundstage

  • Ipod mini click wheel

    I bought my ipod mini in june, and by mid july, the click wheel all of a sudden was at an angle, i mean the wheel itself was slanting to the left, towards the back track button. I never put much, or any force on my ipod mini click wheel, especially since it was my pride and joy, and so new at the time...anyone know why this happens, or how, or has it happened to anyone else other than me?...
    Thank you.
    Kelsey
    Dell Dimension 3000   Windows XP   Intel Pentium 4, 3.0ghz HT technology

    Okay.
    Might want to send it in then...
    http://depot.info.apple.com/ipod
    btabz

  • Ipod mini click wheel works only when charging

    my ipod mini click wheel will only work 100% when it is charging and is recognized by itunes. if a computer does not have itunes it will not work properly and also when it is not charging and i am just using it normally it wont work either. when it is not working right this is what it does: only the forward and play/pause and select work on the click wheel. cant adjust volume or go back to menu. but when charging and in itunes that click wheel works perfect!?!
    can anyone help me figure this one out?
    Also, the battery is really weak, it will only run for about 1hr on full charge. i dont know if that will affect it but if it does please let me know.
    Thanks

    Mine does the same, I can get it to work by taking off the bottom plastic part of the Ipod Mini and pulling the metal thing out a bit.
    HP   Windows XP  

  • IPod with click wheel - will not restore

    Hi all,
    I know I've got the dinosaur of the iPods, but hey. I have a 20g iPod with click wheel. Every time I load up iTunes with the iPod plugged into the PC, iTunes tells me that my iPod is in recovery mode and needs to be restored. (Not sure how that happened, but anyway.) So, I tell it to restore, then plug it into the external power supply as it tells me to do. However, when it is finished restoring, and I plug it back into the PC to reload the songs from iTunes, the cycle starts again. I have restarted my computer, done soft resets of my iPod, but it still won't update. Any help would be appreciated. Though the newer iPods are very pretty, I am quite happy with my old dinosaur, haha.

    After a lot of searching and working on this, I found the problem - and it wasn't my previously theorized conspiracy to get us all to buy more from Apple.... It was quite simple actually.
    http://docs.info.apple.com/article.html?artnum=304508 I followed all of these directions including re-installing the dlls and the usb drivers, but I think the key was that I have multiple USB devices plugged into my computer. I unplugged all but my wireless keyboard. Then I used a different USB port for my iPod than I had tried before. It updated..... Yeah. I don't have to buy one of the new over priced fancy models!!!!

  • Will the accessories for iPod with click wheel 20G work with the new gen?

    Hi,
    I have a iPod with click wheel 20GB and am considering to get a new one, iPod with video 40GB or 80GB. Can I still use the following iPod accessories for 20GB one?
    - dock
    - USB power adapter
    Thanks.

    I know a iPod comes with a usb cord but I would like to use the USB power adapter I have so I can charge iPod during travel with computer/laptop.
    It seems to me that the connector in USB power adapter is a regular USB type B connector. But, I could not find the information to confirm it is a regular USB type B. Even it is the regular USB type B connector it does not work with the a usb cord shipped with iPod, which is a USB type A connector. That's the reason I would like to know if I can use it with new generation of iPod.
    Or, I can just get a USB connector converter. But, not sure if it can supply the enough power to ...
    B.t.w., the model number of the power adapter is A1070.

  • I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    You won't believe this but a friend of mine (who happens to be an Apple Genius) told me to put a towel or cloth on a sturdy countertop (I know this may sound weird) but hold the selct button (in the center) and menu part of the wheel at the same time until an Apple logo comes up on the screen and then quickly turn the ipod on it's side and wack it on the counter where the towel is so as not to damage anything cosmetically. It seems the clicking is the hard drive reader is stuck and this dislodges it. Mine works now (no clicking) and all seems to be well again. Who knew?

  • IPOD mini click wheel not  functioning

    My IPOD mini click wheel is not working. When I attach to my PC, Itunes recognizes it, is able to read the hard drive/play music off the IPOD. I have tried to restore it, the drive is erased, but the click wheel still does not work. I am unable to reset the Mini using the click wheel. Itunes says my software is the most recent.
    thanks

    Mine does the same, I can get it to work by taking off the bottom plastic part of the Ipod Mini and pulling the metal thing out a bit.
    HP   Windows XP  

  • IPod 20GB Click Wheel Stops Playing Music

    All,
    All of a sudden, my iPod 20GB Click Wheel just stops playing music in the middle of songs. I have to hit the play button and restart it. It's pausing the song. It does this periodically/randomly. Does anyone have any suggestions? Your help is appreciated.
    Thanks,
    TC

    The folder with an exclamation point is often a software issue on the iPod. The best troubleshooting step for this error is to restore the iPod.
    http://docs.info.apple.com/article.html?artnum=60983
    =====
    If it still is not working after the restore, you'll probably need to set up a dispatch at the following website.
    http://depot.info.apple.com/ipod

  • IPod 4G click wheel wont sync with itunes with firewire and USB

    my iPod 4G click wheel 20GB won't sync with my Macbook Pro OSX Mountain Lion.......
    only way work is .. I keep plug in and out the dock connector from the iPod ... after 30 to 50 times... it probably work!
    Anyone has same problem?!

    Do you have another cable you can try to rule out the possibility that the cable is damaged or faulty?
    You might also want to double check the iPod's dock connector for signs of bent, damaged, or corroded pins or even debris that could blocking a full connection with the cable.
    B-rock

  • Ipod nano click wheel not responding

    My daughtr's ipod nano click wheel is not responding even after
    I did the 5 r's.

    Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • 60 gig color screen ipod's click wheel died

    My ipod's click wheel has stopped working, when I press any of the buttons nothing happens, but if I toggle the hold button the screen lights up so I know that the rest of the pod works, my computer can also see it when I connect it. I'm going on a long car trip in a few days so I don't have time to get it fixed, if I get one of the ipod remotes should it allow me to use my ipod untill i can send it in to be fixed? Also has anyone eles had this problem and if so what did you do to fix it ive updated it already.

    I just ran the restorer and that just made it worse because now I'm stuck on the select language screen so now my computer doesn't see it. I'm picking up the remote tomorrow so hopefully it will work.

Maybe you are looking for

  • Career Help Needed for me and my wife..your suggestion would surely help!

    Hi Guys, I would really appreciate if you can solve our mid career Dilemma. Me and my wife both want to get in to SAP..Kindly suggest which module should we pick.. My Wife's Profile: She is an Economics honors  graduate and an MBA too. she has got 7

  • 40D raw .CR2 files still causing 'Unsupported Image File' error

    I have the most recent version of Leopard 10.5.1 and the newest version of Aperture 1.5.6 (2J2). Often times I open a RAW image shot with a Canon 40D (.cr2 file), I get the red screen "unsupported Image File" error message. Color mode is RGB. These w

  • Flash image as a background?

    How do i get a flash image as a background in dreamweaver cs3. do i need to change the file name to somthing else?

  • "the importer reported a generic error" on a psd file i have been using all day.

    have been editing all day on a 3 minute video for a client, then all of a sudden, a PSD file with several layers for my graphics went off line... nothing else.. just the psd file. tried to ReLink but all I get is this "the importer reported a generic

  • LabVIEW 2013 SP1 Compile Worker Fails

    Hello, after receiving the new DVDs with LabVIEW 2013 SP1 and successfull installation, I wanted to compile my FPGA.vi. The Compile Worker does not start an I get the attached error Message. The additional Download of Xilinx Compilation tools 14.4 fr