IPod 2nd gen not being recognized

Hey guys. I've tried all the usual stuff (restart, etc). I recently used my FireWire port at an Apple Store, so I know that isn't the problem.
But for whatever reason, my 2G iPod will not be recognized by my computer. It charges, but not even disk utility sees that it is there. Please help me find a solution.

I'm having the same problem with my 2nd Gen iPod too. Initally my computer would not mount on neither my desktop or iTunes.
I've already done the 5 Rs... even connected another iPod to the computer, which worked fine... eliminating a faulty firewire cord, port, and iTunes (latest version).
After I've Restored it, chose language settings, then connect the iPod using firewire, it automatically goes into diagnostic scan disk mode (the one w/ the CD and magnifying glass). I let it run through this cycle, then it reads that the hard drive is OK (CD with a check mark). Then I press any button... the Apple comes up, then it freezes at "Do not disconnect". Then I restart the iPod and I'm back at "Choose language settings" etc. I feel like I'm running around in circles, arrrgh!

Similar Messages

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

  • My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

    My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

    Have you tried each and every single suggestion in this Apple support document yet?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Has this iPod Shuffle ever been able to successfully connect with this PC and sync with iTunes or is the first time you are connecting the iPod Shuffle to this PC?
    B-rock

  • My ipod nano is not being recognized by my laptop

    dear apple community users,
    when i connect my ipod nano to my lapto (hp) it shows the charging sign but it is not recognized by the laptop.
    i have tried turning it on and off may times but has not helped
    i have the latest version of itunes on the laptop but due to this problem i am not able to sync the music files from the laptop
    plss help and reply asap

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • My 4th generation ipod touch is not being recognized on my computer ?

    My 4th generation ipod touch is not being recognized on my computer what do i do ?

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • My ipod nano is not being recognized by any power source:(

    My computer and power cord for electrical outlet is not causing any response from my ipod

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

    Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
    Thanks

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

  • HT1510 My iPod shuffle is not being recognized by my computer. I have the original USB cord but when I plug it into my computer there is no recognition. The first time I plugged it in it recognized but never again.

    My iPod shuffle is not being recognized by my computer. It is flashing orange and when plugged in with the original USB cable nothing happens to show the computer recognizes it.

    Flashing orange usually means it is being recognized by the computer.  The flashing means do not disconnected, because the shuffle's "disk" is mounted.
    In iTunes (with the shuffle connected), when you look in the sidebar (left side of window), under DEVICES, the iPod is not shown there?  Does it say DEVICES in the sidebar?

  • HT1335 My Ipod touch is not being recognized on my PC as a usb device.

    My Ipod touch is not being recognized on my PC as a usb device.

    Hey MOIMC,
    Sorry to hear your computer isn't recognizing your iPod Touch when you plug it in. I was able to find two articles that might help you out:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    and
    iPod not recognized when connected to Windows laptop over USB
    http://support.apple.com/kb/TS1401
    Hope this helps,
    David

  • IPod Shuffle (2nd Gen) not being recognised or playing

    My iPod shuffle is not being recognised by iTunes, and I cannot play any music through it. When I connect it to my iMac the green LED flashes 3 times, then goes out, and nothing else happens.
    Can anyone help?
    Thanks

    My iPod shuffle is not being recognised by iTunes, and I cannot play any music through it. When I connect it to my iMac the green LED flashes 3 times, then goes out, and nothing else happens.
    Can anyone help?
    Thanks

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
    Any suggestions?

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Ipod 2nd gen not connecting to bluetooth

    Hi I have an ipod 2nd gen that i would like to pair with my Windows 7 laptop but for some reason it wont....Is it due to wrong specifications o nthe ipod?

    iOS: Device not recognized in iTunes for Mac OS X
    - New cable and different USB port. Different conductors/contacts are used for charging and data
    - Try on another computer to help determine if computer or iPod problem

  • IPod 2nd gen not showing in iTunes

    My iPod 2nd gen hadn't been used for a while, and the battery was dead.  I charged it, and connected it to my Mac Mini (1st gen).  It is now continuously blinking orange but is not showing up as a device in iTunes (v. 10.6.3).  According to the manual, the blinking means it's syncing in iTunes, or the iPod shuffle is enabled for disk use.  I don't know what the latter means. 
    I'm using the original dock, but it is connected to a USB port on my external hard drive which is connected to the mini, since the 1st gen Mini doesn't have enough USB ports.  (That shouldn't be a problem though, because my 3rd gen iPod nano shows up in iTunes using that same port.) 
    I've tried twice to get it to show up in iTunes.  The first time it was already connected to the USB port but wasn't showing any lights, and it didn't show up in iTunes.  I turned the shuffle off, waited 5 seconds, and turned it on again.  Still didn't show up, so I manually removed it from the dock and unplugged the dock. Then I plugged the dock in again, and put the ipod firmly into the dock.  Then the orange blinking lights started, but it didn't show up in iTunes that time either.  I did get an error message that it had not been put away properly.
    Since it wasn't showing up anywhere that I could find (iTunes, Finder, Desktop) to eject it, I shut down the computer, removed the iPod from the dock, restarted the computer, opened iTunes and then put the iPod in the dock. It still doesn't show up as a device in the left-side sidebar of iTunes where it usually does, right after Library, Store, and before Playlist).  I can't put it away properly now because I can't find it to eject it. It's still blinking orange.  (The right sidebar only has a message about Genius and learning to use it).
    I've read previous questions similar to this, but nothing suggested there has worked.  If anyone has suggestions/idea, it would be greatly appreciated.
    My O.S. is 10.5.8.
    Thanks,
    Esther

    Thanks for providing a good amount of detail. 
    Enable disk use is a setting (checkbox) on the shuffle's Settings tab in iTunes.  It allows you to see the iPod's "disk" on the Desktop continously while it is connected, so that you can copy files to it using Finder (like it was a USB flash drive).  The light blinks as a warning to eject before disconnecting, because the iPod's disk is mounted.  If that checkbox is NOT checked, iTunes only mounts the iPod's disk when syncing, so the light does not blink most of the time (and you can disconnect it without ejecting).
    Although you have confirmed that the USB port on the external drive (Is it an OWC miniStack?), which is the same as a powered USB hub, works with another iPod, you may want to disconnect something from a direct USB port temporarily.  Connect the shuffles docking cable there, to confirm it's not the port causing the problem.
    If you connect it and run Disk Utility instead of iTunes, does it appear in the Disk Utility sidebar?
    Since this is a 2nd gen shuffle, and you use a Mac, you can try using the iPod Reset Utility
    http://support.apple.com/kb/ht1238

  • IPod Touch 2nd generation not being recognized / charging through iTunes

    I am having issues with my 2nd gen iPod Touch being recognized in iTunes or Windows.  I have tried multiple computers with no luck (Windows XP and 7).
    Here is what is going on.
    iPod is not recognized through computer or iTunes
    iPod doesn't charge through computer or a wall charger, however, will charge through a seperate speaker dock. (this seems odd that it will charge on a dock, but not through the wall charger or computer).
    Each time the iPod is plugged into the computer with Windows XP, I get a message that the USB device is not recognized.  I get no message when plugged into Windows 7.
    Here are the steps I tried to fix the issue.
    used multiple cables, 3 in all.  My iPhone 3gs works fine and is recognzied with all cables / computers.
    reset the device numerous times and re-started computers.
    Uninstalled iTunes and reinstalled with no luck.
    I'm reaching out into the community to see if anyone has had similiar issues and looking for advice to solving this problem.
    Thanks for your help and responses.

    Slightly different contact configuratio in the dock might allow charging nly on the dock.
    If you can't straight out the contacts:
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. However, it may not be worth it for the old 2G iPod.
    Apple - iPod Repair price      
    A third-party place like the following is less. Google for more.
    http://www.iresq.com/ipod-repair/ipod-touch-2.html
    but may not be worth it for a 2G
    But may not be worth the $69 plus shipping for the old 2G iPod

  • Ipod classic suddenly not being recognized on PC

    Hi,
    My ipod classic (7th gen) used to work fine and was recognized on my PC and in iTunes. BUT now it has suddenly stopped being recognized on the PC. My other ipod classic works fine and is recognized by the PC and iTunes as soon as I plug it in (same dock with the same lead), so it can't be anything to do with the lead / USB / dock.
    I have tried resetting the ipod, uninstalling & reinstalling iTunes, to no avail.
    Can anyone please help?!
    I use Windows 8.1 (64-bit).
    Thanks,
    Mike

    Have you tried everything here?
    iPod not recognized in iTunes and Mac desktop
    B-rock

Maybe you are looking for

  • Automatic creation of transportation lane between two Plants or location

    Hi, I am aware that when we cif Inforecords from R/3 to APO new transportation lanes automatically gets created between the Plant and Vendor. The isssue which i am facing is that i want transportation lanes to be created between two plants . The TL s

  • How to use the method substituion in variable ODI

    Hi folks, I have a variable that run the follow query; select GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL GER_LOT_EXEC_ODI is a function, and i need to pass the data shema name before this: I'd like that stay this: select data_shema_user.GER_LOT_EXEC

  • How to save a symbol so I can reuse it . .

    Hi to all! I want to start this discussion with an apology. I apologize if this question has asked many times or several times ago. I am really sorry. Now, my problem is that my schedules are tight now, I can't finish a sprite animation for a day. My

  • Lead Management

    Hi, I have an issue with Lead transaction, there are 4 qualification levels and at each qualification level an activity is triggered My requirement is that until and unless the 1st activity triggered from Qualification level 1 is closed the lead docu

  • Ignore new Payload Type in RTPManager

    Hi, Im working on a project who receives sound from a cell phone. The cell phone send Audio trough the SIP Server in G711 ALAW, with a Payload of 8. Following this tutorial: [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/C