IPod 2nd Generation Problem

So I have tried everything I can think of, I have had this iPod since May and recently I plugged it in and it said that it was corrputed and I had to restore, so I did that. However when I restore it, after it is done, it tells me again that it is still corrputed. I have used a different USB cord to connect it to my computer and it still didn't work. I have all the updated software for iTunes and I am completely out of ideas, I even took it to Best Buy and they plugged it in and it worked fine for them, they even uploaded a song to it.

Point of order: you are actually posting in the Mac section rather than Windows.
You have a drive conflict with your Nano and something else on your computer, which is why it worked at Best Buy and not on your computer. You need to disconnect every USB device connected to your computer with the exception of your iPod (connected to a rear port on your computer), keyboard and mouse. Disconnect your printers, external hard drives, thumb drives, scanners, digital cameras, modems, etc. If you are on a network, disconnect from the network.
Now assign your iPod a different drive letter. Try M or P or Z.
http://docs.info.apple.com/article.html?artnum=93499

Similar Messages

  • Can't see the list of songs on my iPOD 2nd generation

    i have installed the ipod, and i am able to transfer my songs into my ipod 2nd generation, however i am not able to see the list of songs that i have put into the actual ipod shuffle. Can someone please help me !
    thanks

    no, there is contents. i just figured it out.
    to recap: i had 2 problems: one was that i couldn't see the contents of the shuffle. the other was that i couldn't eject my shuffle. when i tried to eject, i kept getting the message that i couldn't eject because an application was using the files on the ipod. when i clicked the icon of my shuffle i got the picture of the ipods with the heading "ipod + itunes," as i recall. there were no settings or content tabs.
    now i realize there were no tabs because i had not finished the registration of the shuffle on my pc. i had registered the shuffle on the website without using itunes. i didn't realize that there was more i needed to do in itunes because i couldn't see all of the buttons in my window. when i followed through with the registration in itunes all the way to the end, the 2 tabs were revealed and the songs that i had already loaded on the shuffle were listed in "contents." and, i was able to eject the shuffle. apparently itunes (or whatever) was still looking for a completed registration and wouldn't release the shuffle. sigh.
    if you can not see the settings and contents tabs in itunes when you click your shuffle in devices or you can not eject the shuffle, look at the window with the picture of the ipods in itunes. there is more below. complete the registration (i had already done so on the web earlier, but my itunes was not complete.).
    thanks to everyone for your help.
    power spec 8921 (pc)   Windows XP  
    power spec 8921 (pc)   Windows XP  

  • I have a iPod 2nd generation and it will not charge or connect to itunes

    I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.

  • I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

    I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle.  I had it on charge all night but still dead.

    Try here.
    iPod touch: Hardware troubleshooting
    You may have a hardware problem.

  • Ipod 2nd generation won't work. Need Help PLEASE

    i have a ipod 2nd generation and haven't used it for 3 months or more. and now that I try to turn it on, it won't turn on. I have tried charging it for 2 hours and still the screen stays black. need help. what do I do?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Looking for a procedure to switch an iPod 2nd generation from Win. to Mac

    Hello,
    I'm looking for a procedure to switch/migrate an iPod 2nd generation from a Windows computer to a Mac running Snow Leopard.
    When the iPod was first connected to the Mac its content was imported fine. However, ever since when the iPod is connected to the Mac it will appear in the Finder as a "drive" but doesn't appear anymore in iTunes.
    I couldn't find any document in Apple's support web site about how to properly handle that type of migration.
    I would appreciate if somebody could point me to a documented procedure on how to resolve this, or provide any other type of suggestion.
    Thank you.

    I solution the problem of my iPod 2G touch wheel for windows !!!!
    problem:
    iPod 2G touch wheel windows formated version 1.2.1
    Powermac G5 Mac OS X Leopard 10.5.8 iTunes 9.0.3 (last version)
    it mounts on finder as a volumen, launch iTunes, but don´t recognize it as ipod ?¿?¿!!?¿?¿
    do the same in PowerBook G4 Mac OS X 10.5.8 iTunes 9.0.3
    format Ipod 2G with "disk utility" to mac format
    it mounts on finder as a volumen, launch iTunes, but don´t recognize it as ipod ?¿?¿!!?¿?¿
    I can´t restore and update ipod software !!!!!! aaaaaHHHH!!!!!!
    only works as firewire HD
    re format Ipod 2G with "disk utility" to windows MS-DOS FAT (don´t ask me why !! desesperation!!)
    My solution:
    I have other partition with Mac OS X Tiger 10.4.11 (for audio aplications)
    iPod 2G windows formated (no working, formated!)
    powermac G5 Mac OS X Tiger 10.4.11 iTunes 8.0.3
    IT WORKS !!!!!!
    restore and update iPod to version 1.5
    I put iPod in manual mode (no syncro), start up in 10.5.8 iTunes 9.0.3 and Works !!!!!!
    where is the problem? iPod version 1.2.1 ? iTunes 9.0.3?
    upgrading iPod in windows to 1.5, is the same solution?
    hope this helps somebody ...

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. Is there anything I can do to get it back?

    I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. This is the same with many other apps as well and not just temple run. Is there anything I can do to get them back?

    So, you need an older version of the iOS app, because the current version no longer works on your iPod touch.
    If you do regular backups of your hard drive (as you should), such as by using Apple's built-in Time Machine (if you use a Mac), you may find the older version of the app in the backup archive, and restore it (replacing the newer version).  They are stored in the iTunes Media folder, in the Mobile Applications sub-folder.  You should then be able to sync the older version to your iPod touch.
    I can't think of any other way to get it back...
    NOTE:  An 2nd gen iPod touch can run up to iOS 4.2.1.  If your iPod touch is running something earlier, and that is why the app no longer works, you can also consider updating the iPod's iOS.
    I use an even older iPhone (original).  I avoid this potential problem by aways updating its apps on the iPhone, not in iTunes on the computer.  When I do it on the iPhone, it will not download a newer version of an app that won't run on my old iPhone.

  • I have an ipod 2nd generation and it only works when i plug it in

    okay so i habe this ipod 2nd generation i actually have two and they are both doing the same thing at first i plug them in and the only thing that comes up is the do not disconeect screen but after a while oh fiddling with it i got the screen to go away and i can se my music and videos and i can see that my battery is full now the moment i unplugg either ipod they automatically freeze, the backlight goes out then the screen eventually fades completely away. now while this is happening none of the bottons works and the ipods are not able to be turned on or play at all almost as if there dead. but they are not becuase as soon as i plug them back in everything shows up perfect the battery is fully charged the backlight  is on and the butttons work. help please

    Sounds like your battery is not taking a charge, I know it shows full with you plug it in.  Try plugging it into a wall socket for a few hours and see if the iPod will work on battery power. 

  • HT201210 Ipod 2nd Generation Update Issue

    I can't get my Ipod 2nd gen to update or restore from 4.2.1. How can I get the Ipod to update?

    iPod 2nd Generation's most up-to-date iOS is 4.2.1. Cannot update any further than that.

  • Are there any games on an ipod 2nd generation that will download?

    are there any games on an ipod 2nd generation that will download? my daughter was given one from a family member and we haven't been able to download any apps to it. It tells me I need to update by OIS. But you can't for this generation. Does any games work ?

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was releases, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

  • My iPod 2nd Generation won't turn on and will not connect to any computer!

    A few months ago I woke up one morning and tried to turn on my iPod 2nd generation. It wouldn't, so I thought that maybe it was just out of battery. I plugged it into my computer but it would not connect and charge. I tried pluging it in to many other computers and none of them worked. (I tried MACs and PCs) When this happened my warranty was already up. Now my parents want to bring it in to see what is wrong, WHILE THERE IS NO WARRANTY!!!!!!! I told them that it was a waste of time and money because we would have to pay to see what was wrong. If there is something wrong that is easy to fix great!, but if there is something really wrong with it and it is crazy expensive to fix we just waisted time and money. If there is something wrong but there is no way of fixing it we also wasted time and money!! I have explained all of this to my parents but they won't listen!!! Is it worth it to get it checked out or should I just keep trying to explain to them that it's a waste of time and money????   Help!!  

    If your iPod is still charging if you plug it to the adapter, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
    iOS: Unable to update or restore
    If it does not charge, you'll have to get it serviced.
    Apple can offer you a replacement device, but you'll have to pay for it:
    Check the pricing here:
    http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • IPod 2nd generation doesn't let me do anything. It's really SLOW!

    I have an iPod 2nd generation and I don't like if because, it won't let me get any games, I can't update my system, and sometimes I can't open my text app. Could I possibly get a 20% off on a iPod 4G?

    You can get10% off on a new one.
    Apple - Recycling Program for iPod and Mobile Phones

  • How to unlock my ipod, 2nd generation?

    My ipod 2nd generation is disabled and it wants me to try again in 22,544,204 minutes. That is about 42 years from now. Please help!!!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • Print dialog slow

    using acrobat pro 9 on win 7, and today the print dialog has become very slow, to the point the program goes into does not respond mode before it tries to print

  • REQ: LABVIEW

    REQ: LABVIEW

  • Resolution of n8

    i purchased nokia n8 one month back, im new to nokia. this is my first nokia phone. from the date of purchase im getting a doubt about resolution of n8. it is 360x640, is it sufficient for a 3.5" screen. i previously used samsung jet. it has 480x800

  • ASR_PROCESS_EXECUTE - ABAP Webdynpro application keeps looping

    Hi, We are implementing HCM Processes and Forms framework and trying to use the standard ABAP Webdynpro application ASR_PROCESS_EXECUTE to be able to Start HR Personnel related processes. Start Processes iview available with the HR Administrator pack

  • Palm TX won't complete sync

    I am using Vista Home (32bit); Outlook 2007; and Palm Desktop 6.2.2.  Palm OS Garnet v5.4.9 When I try to hotsync to Outlook, it starts off nicely, but then quickly bogs down.  It hasn't completed a hotsync yet.  Hangs up in the contacts.  Last attem