IPod 30G not connecting to iTunes

Okay.
My iPod 30G Video is not connecting to iTunes. It is not showing up in the 'source panel'. It froze the the day after I bought it and I had to reset it. It froze two days later and it took about 45 min of resetting it to get it to where it is now: plays songs fine; cannot connect to iTunes; when I attach the iPod to my PC the 'do not disconnect' appears.
Anybody run in to this problem?

Well I tried to restore it as well but an error message kept popping up (on my PC). Mind you, I tried this at work; I'll try later to-night at home.
Thanks for the response!

Similar Messages

  • My iPod will not connect to itunes after windows 8.1 download

    My iPOD will not connect to itunes after windows 8.1 download
    I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
    My ipod does work on my old computer and it was working on windows 8 before I update to  8.1
    I don't want to installed again because I just did that and didn't work!
    I want to use my iPod on this computer and system.  Can this be fix?

    Hey TheBurntApple,
    Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • TS1363 Since the last iTunes update my iPod will not connect to iTunes

    Since the last iTunes update my iPod will not connect to iTunes. My computer recognizes it but as soon as I launch iTunes I get the error message: An iPod has been detected, but it could not be identified properly. I have done ALL troubleshooting steps and it still gives me the error...... this only happend since I updated iTunes.

    Doublechecking. Have you also worked through the following troubleshooting document?
    iPod nano: Error message saying that iPod 'could not be identified properly'

  • IPod Touch - Not connecting to iTunes

    My iPod suddenly will not connect with iTunes.  I have it connected to my computer with usb cable, but nothing seems to work. Has anybody else ever had this problem?

    My problem is slightly different, though not less frustrating. When I open iTunes I can connect my Touch but when I go back to Home on the touch, or it go to standby, even with the Keep Connected on I loose the connection and the iTouch doesn't find my iTunes again. The only way to get out of this is to restart iTunes, then everything works again. I am using the iTouch to my media PC to avoid having to turn on my TV each time I want to play music.
    I have reinstalled the iTouch again, still the same problem

  • Helpppp My Ipod Will not connect to itunes via my computer, but when i plug it into my laptop it connects but doesnt have all my songs on the itunes library. How can i add songs to my ipod via my laptop

    ??

    Nothing should be lost.
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    NOTE:
    The 2nd Gen iPod Touch can only go to 4.2.1

  • Ipod nano not connecting to itunes but computer reads it

    i just got a new ipod nano and i downloaded itunes 7.0.2. the computer recognizes it because of ding it makes and the ipod itself acts like one should. it also shows up in "my computer", but it does not appear in itunes. i have followed numerous troubleshooting tips with no affect.
    please help!

    It's woorking!
    Ok, after some 40 hours trying to figure out what was wrong in my case, I think I might have found the problem. The newest ipod software (I think) requires USB 2.0. I have a Dell Dimension 2400 Desktop running Windows XP Pro SP2. There are several USB ports: 2 in the front and 4 in the back. One of the first things I did was go to the device manager and check whether I had USB 2.0. Indeed, there was a USB 2.0 Enhanced Host Controller. All the problems I encountered were the same whether I used the two ports on the front or the two lower ports on the back. I went to the store for the second time ready to turn in my ipod nano and try to get my money back, but they told me that my computer didn't have a USB 2.0 port and that was the reason I was having trouble. They made me buy a USB 2.0 PCI card and sent me home. Before I proceeded to install the card, I carefully revised my ports. That's when I realized I had a printer connected to another USB port, ánd because of that I didn't notice I had two extra USB ports that carried that funny symbol you will find on the USB ipod connector. I hadn't tried the ipod on the port the printer was connected to, neither on the one next to it. I hooked my ipod to the ipod-virgin port and it worked! Finally! itunes recognized my ipod and I was able to upload songs and all. I didn't realize that even if you have one or two 2.0 USB ports, the others aren't necessarily 2.0 (on the device manager there were other host controllers that were not "Enhanced"). I guess this is what happened. I can't come up with any other explanation.
      Windows XP Pro  

  • IPod shuffle not connecting to iTunes...?

    When I plug in my shuffle nothing happens. No error, no lights, nothing.
    I was able to connect to iTunes on a friend's computer, but not mine. I uninstalled the iTunes software and reinstalled it. No luck.
    My shuffle isn't recognized by the iPod updater either.
    Please help....

    i have exact same prob.... it has worked fine for about 5
    months but has now decided to just stop.
    i connect it and nothing happens at all???
    no lights nothing but the shuffle still plays songs untill
    the battery runs out....btw, i cant even charge it coz it does it does not connect AT ALL.

  • Ipod nano not connecting to itunes or updater

    I just bought my new ipod nano a few days ago. Ever since I got it, it has not been able to connect to itunes and gets a "ipod service error" in the updater. However, it is recognized im my computer as a removable disk. I have tried all of the apple support suggestions, tried formatting it, reinstalling, amongst many other things.
    I realize my problem now is that the ipodservice.exe is not running at all in processes in windows task manager. I looked in the bin folder of the ipod in program files, and it is there so it doesn't make sense that it doesn't run.
    If anyone has any suggestions as to why this exe file is not running please help me. Any feedback would be greatly appreciated.
    P.S. When I first got my ipod out of the box I plugged it into the computer and put files on it, rather than installing the software first (how stupid of me). I wonder if this is the cause of it not working now.
    Windows XP

    It's woorking!
    Ok, after some 40 hours trying to figure out what was wrong in my case, I think I might have found the problem. The newest ipod software (I think) requires USB 2.0. I have a Dell Dimension 2400 Desktop running Windows XP Pro SP2. There are several USB ports: 2 in the front and 4 in the back. One of the first things I did was go to the device manager and check whether I had USB 2.0. Indeed, there was a USB 2.0 Enhanced Host Controller. All the problems I encountered were the same whether I used the two ports on the front or the two lower ports on the back. I went to the store for the second time ready to turn in my ipod nano and try to get my money back, but they told me that my computer didn't have a USB 2.0 port and that was the reason I was having trouble. They made me buy a USB 2.0 PCI card and sent me home. Before I proceeded to install the card, I carefully revised my ports. That's when I realized I had a printer connected to another USB port, ánd because of that I didn't notice I had two extra USB ports that carried that funny symbol you will find on the USB ipod connector. I hadn't tried the ipod on the port the printer was connected to, neither on the one next to it. I hooked my ipod to the ipod-virgin port and it worked! Finally! itunes recognized my ipod and I was able to upload songs and all. I didn't realize that even if you have one or two 2.0 USB ports, the others aren't necessarily 2.0 (on the device manager there were other host controllers that were not "Enhanced"). I guess this is what happened. I can't come up with any other explanation.
      Windows XP Pro  

  • IPod touch not connecting to iTunes or computer and has a "connect to iTunes" message when powered on

    So, I got my iPod 3rd gen 8gb off craigslist, I had a chance to test it, it worked fine then. I reset it and then tryed to connect to iTunes with my sisters' iPod touch 4th gen usb cable, and it didn't work. I tryed it again on my moms desktop and it says that the USB device is not recognised, so the USB cable DOES work. I downloaded iTunes on the desktop computer, and still, didn't work. I ordered a new cord, maybe it will work, but who knows. Also, I contacted the people I got the iPod from, they said they had reset it and it connected to iTunes just fine.
    A nice detailed answer would be appreciated.

    Ahh, just un-installed the Apple Mobile Device thing in my Programs and Features, then uninstalled iTunes and reinstalled it and it worked, I got the driver in and did the thing on the page you gave me and it works like a dream. Thank you!!

  • My iPod will not connect to itunes

    ipod wouldnt connect to itunes on macbook. says i have to type in password on ipod, but ipod in disablied.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • IPod will not connect to iTunes... I'm not a hopeless tech illiterate...

    iPod Touch 4G would keep asking me to restore it and never let me sync it. I just reinstalled iTunes, and now it won't connect to iTunes and I can't go through the setup process on the iPod.  Any help would be appreciated. Thanks

    Maybe this:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • Why will my iPod Touch not connect to iTunes

    I backed up my iPod Touch 4G before updating the OS. Now, when I have iTunes open and plug in my iPod it says it will not connect because it could not find the pairing record. When I have the iPod connected to the computer before I open iTunes it shows up. What is the problem?
    By the way, my iPod updated from OS 5.0 to OS 5.0.1.

    Make sure that you're running the latest version of iTunes and that Apple Mobile Device Service is installed and running: http://support.apple.com/kb/TS1567
    More troubleshooting here: http://support.apple.com/kb/TS1538

  • One of my sons ipods will not connect to itunes store

    I have a couple of ipods for my kids, and one of them has decided to not allow that ipod to connect to itunes. Any help would be nice.

    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
    Can't connect to the iTunes Store
    Safari works, right?

  • TS4062 For some reason my Ipod will not connect to Itunes store nor will it sync.whats up with this?

    For some reason my IPOD touch will not connect with the Itunes store nor will it sync with my PC. Whats up with this?

    How To Fix 0×80090318 and related errors – Windows 7, XP & Vista
    Also Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • My ipod is not connect with itunes.

    when i connect my ipod touch to my pc,there is no change for my ipod.i think it is not working.no messeges there.its just like sleepy mode.
    what can i do?.

    Try here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Also, if the iPod does not turn on see:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Can't watch dvds any more. Error: RADIO. What's that suppose to me

    Title says basically everything I need to know. Why, when I use the remote to open the creative media source engine to play a dvd and I try playing it it says Error: Radio. I mean, come on, what's the Radio got to do with watching Dvds? I get a nero

  • Physical Asset Tracking & Management Webpart

    I am using SharePoint 2013 Enterprise. I am looking for some cost effective solution for asset management in SharePoint 2013 to track all the physical assets in the organization. I searched in the Internet, i could not get any which serves my exact r

  • Error importing HCM project in txn SXDA

    According to the "Quick Guide to Installing the SAP Best Practices for Human Capital Management (US)", step 2.4, I am to use transaction SXDA to upload a project which has been extracted from Note 1060029.  When I do so, I get the error: File C:\usr\

  • Changing Sales Organisation for Materail

    Hi, What is the t-code to change the Sales Organisation for the material Regards Smitha

  • TNS-03505 error

    Hi, I've got a TNS-03505 error on a PC trying to connect to 2 differents databases. The tnsnames.ora seems correct : HPERISQOP.ARPEGE.SOCGEN = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.128.162.193)(PORT = 1548)) (CONNECT_D