IPod 30GB generation 5 Video takes a long time to start up/load

The iPod i currently own takes a while to load where i can operate it. The last time i used it was a while ago and i gave up on it, now im back at it. It wouldnt play the songs so i tried to restore it after i did that, my itunes would not find it nor my mac. I am running into a brick wall with this one. any answers?

Wow I'm dense. I even looked at that file and I didn't see what it was doing. I just changed /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml and took out a few entries.
<?xml version="1.0" encoding="UTF-8"?>
<channel name="xfce4-session" version="1.0">
<property name="general" type="empty">
<property name="FailsafeSessionName" type="string" value="Failsafe"/>
</property>
<property name="sessions" type="empty">
<property name="Failsafe" type="empty">
<property name="IsFailsafe" type="bool" value="true"/>
<property name="Count" type="int" value="5"/>
<property name="Client0_Command" type="array">
<value type="string" value="xfwm4"/>
</property>
<property name="Client0_PerScreen" type="bool" value="false"/>
<property name="Client3_Command" type="array">
<value type="string" value="xfdesktop"/>
</property>
<property name="Client3_PerScreen" type="bool" value="false"/>
<property name="Client4_Command" type="array">
<value type="string" value="xfce4-settings-helper"/>
</property>
<property name="Client4_PerScreen" type="bool" value="false"/>
</property>
</property>
<property name="splash" type="empty">
<property name="Engine" type="string" value=""/>
</property>
</channel>
Now it doesn't start xfce4-panel or Thunar --daemon and I don't have to use the session manager. And start up is way faster than with the session manager, which is clearly not working properly.

Similar Messages

When i turn it on it takes a long time to start up and it freezes in some of the apps so I had to turn it off

Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
Also it freezes in some of the Apps, so it make me to turn of.
Please be kind enough to guide me to solve these problems.
I thank you in advance for your cooperation and quick response.
Best Regards
Ahmad Emami

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Lenovo Services/Program takes a long time to start after bootup

It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?

No response?
Anyone else on T400 notice this?

My macbook pro takes a long time to start up, my macbook pro takes a long time to start up

my macbook pro takes a long time to start up, my macbook pro takes a long time to start up

up to 10 mins

NW2004s takes a long time to start up

I am trying to find out why out NW2004s takes a long time to start up.
We have installed NW2004s SP8 JAVA only to use it as Enterprise Portal with Oracle 10g on SUN SPARC 64. While the shutdown of J2EE is pretty fast, the startup take over an hour and half.
/usr/sap/<SID>/JC##/work/dev_server0 file shows:
Thu Aug 10 15:31:48 2006
4017.515: [GC 4017.515: [ParNew: 104368K->17613K(131328K), 0.0423530
secs] 797893K->711138K(1004800K), 0.0428819 secs]
Thu Aug 10 15:31:50 2006
4019.309: [GC 4019.310: [ParNew: 105165K->17610K(131328K), 0.0762693
secs] 798690K->711134K(1004800K), 0.0767036 secs]
Thu Aug 10 15:34:35 2006
4184.118: [GC 4184.119: [ParNew: 105162K->22685K(131328K), 0.0762199
secs] 798686K->716210K(1004800K), 0.0766811 secs]
and /usr/sap/<SID>/JC##/work/std_server0.out file show entries like:
2051.407: [GC 2051.408: [ParNew: 112475K->25810K(131328K), 0.1614717
secs] 678386K->591721K(1004800K), 0.1619460 secs]
2060.554: [GC 2060.555: [ParNew: 113362K->26687K(131328K), 0.1458862
secs] 679273K->592599K(1004800K), 0.1463431 secs]
2068.742: [GC 2068.742: [ParNew: 114239K->27592K(131328K), 0.1464110
secs] 680151K->593504K(1004800K), 0.1470097 secs]
2077.575: [GC 2077.576: [ParNew: 115144K->28470K(131328K), 0.1545706
secs] 681056K->594382K(1004800K), 0.1550365 secs]
2086.411: [GC 2086.411: [ParNew: 116022K->29505K(131328K), 0.1559618
secs] 681934K->595417K(1004800K), 0.1564804 secs]
2094.803: [GC 2094.803: [ParNew: 117057K->30419K(131328K), 0.1531343
secs] 682969K->596331K(1004800K), 0.1536090 secs]
2103.255: [GC 2103.255: [ParNew: 117971K->31345K(131328K), 0.1602581
secs] 683883K->597257K(1004800K), 0.1620506 secs]
2112.423: [GC 2112.424: [ParNew: 118897K->32236K(131328K), 0.1715456
secs] 684809K->598147K(1004800K), 0.1721748 secs]
2123.276: [GC 2123.276: [ParNew: 119788K->33014K(131328K), 0.1640996
secs] 685699K->598926K(1004800K), 0.1645846 secs]
2132.172: [GC 2132.172: [ParNew: 120566K->33980K(131328K), 0.1673372
secs] 686478K->599891K(1004800K), 0.1678214 secs]
2141.072: [GC 2141.072: [ParNew: 121532K->34784K(131328K), 0.1810283
secs] 687443K->600695K(1004800K), 0.1814991 secs]
2149.693: [GC 2149.694: [ParNew: 122336K->35368K(131328K), 0.1670516
secs] 688247K->601280K(1004800K), 0.1675269 secs]
2158.486: [GC 2158.486: [ParNew: 122920K->36435K(131328K), 0.1756513
secs] 688832K->602347K(1004800K), 0.1761320 secs]
2167.314: [GC 2167.315: [ParNew: 123987K->37497K(131328K), 0.1852015
secs] 689899K->603409K(1004800K), 0.1857250 secs]
2176.397: [GC 2176.398: [ParNew: 125049K->38251K(131328K), 0.1741406
secs] 690961K->604163K(1004800K), 0.1746117 secs]
2185.352: [GC 2185.352: [ParNew: 125803K->39375K(131328K), 0.1920462
secs] 691715K->605287K(1004800K), 0.1925810 secs]
2194.150: [GC 2194.151: [ParNew: 126927K->40253K(131328K), 0.1923566
secs] 692839K->606165K(1004800K), 0.1928781 secs]
2202.884: [GC 2202.884: [ParNew: 127805K->38024K(131328K), 0.2031970
secs] 693717K->607088K(1004800K), 0.2036677 secs]
2211.384: [GC 2211.385: [ParNew: 125576K->38851K(131328K), 0.1844842
secs] 694640K->607915K(1004800K), 0.1849062 secs]
2219.963: [GC 2219.964: [ParNew: 126403K->39869K(131328K), 0.1842210
secs] 695467K->608932K(1004800K), 0.1846878 secs]
2228.866: [GC 2228.867: [ParNew: 127421K->39719K(131328K), 0.1920358
secs] 696484K->609702K(1004800K), 0.1925630 secs]
2238.453: [GC 2238.453: [ParNew: 127271K->40643K(131328K), 0.1889567
secs] 697254K->610627K(1004800K), 0.1894261 secs]
2247.056: [GC 2247.056: [ParNew: 128195K->40718K(131328K), 0.1947238
secs] 698179K->611585K(1004800K), 0.1951833 secs]
2255.409: [GC 2255.410: [ParNew: 128270K->40804K(131328K), 0.1939193
secs] 699137K->612886K(1004800K), 0.1943765 secs]
2264.305: [GC 2264.306: [ParNew: 128356K->39943K(131328K), 0.1884611
secs] 700438K->613753K(1004800K), 0.1889279 secs]
2273.187: [GC 2273.188: [ParNew: 127495K->39907K(131328K), 0.1996605
secs] 701305K->614598K(1004800K), 0.2001354 secs]
2281.869: [GC 2281.870: [ParNew: 127459K->39951K(131328K), 0.1870669
secs] 702150K->615514K(1004800K), 0.1875029 secs]
2290.306: [GC 2290.307: [ParNew: 127503K->39975K(131328K), 0.1803927
secs] 703066K->616409K(1004800K), 0.1809368 secs]
2300.101: [GC 2300.101: [ParNew: 127527K->39897K(131328K), 0.1830319
secs] 703961K->617187K(1004800K), 0.1835056 secs]
2310.130: [GC 2310.130: [ParNew: 127449K->39869K(131328K), 0.1858475
secs] 704739K->618039K(1004800K), 0.1862819 secs]
Does anyone know what these entries are and some possible options to speed up the startup process? Thanks. I have already gone through the notes for Virtual memory and heap settings for SUN systems. Has anyone had any similar experience?
Thanks!

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Takes a long time to start

My Zen Micro 6 GB takes a long time to start up (aprox. -2 minutes). This is not the end of the world but it is annoying. He started doing this 2 days ago, have it for half a year.
I did the cleanup, but before I format the thing I want to be sure that's the only way.
Thanks in advance.

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Aperture 3.1 takes incredibly long time to start

Since after the upgrade from 3.0.x to 3.1 Aperture takes a long time to start up. I click on the Aperture icon in the dock, the icon bounces for almost a minute, then it stays still for more than a minute, doing nothing and without the "light bulb" indicator that the app is running. It's just sitting there in the dock. After a total of 2-5 minutes, the Aperture window opens and I can start working.
I tried many things suggested in the forums to speed up Aperture:
I turned off Faces
I turned off sharing of previews with iLife and iWork
I turned off using embedded JPEGs from camera
I deleted all Aperture preferences as I thought there might be a corruption after upgrade
I removed all plugins from Aperture plugin folder to make sure nothing is interfering
I used the Aperture rebuild and repair options on the library
I created a new Aperture library and imported my photos from the old library into a fresh one
I downloaded and installed the Aperture 3.1 update again to make sure nothing got corrupted during update installation
Nothing helped. Aperture takes 2-3 minutes to fully start.
Plugins in use: NIK Software's Viveza 2 and HDR Efex Pro, Tiltshift for Aperture. That's it. And, as I said, it doesn't help if I take them out of Aperture's plugin folder so they don't get loaded. Problem still remains.
My library isn't that big: 29GB in 8230 items. Is 2-3 minutes a normal startup time?
Has anyone experienced a similar problem after upgrading? As I literally exchanged everything underneath Aperture (deleted preference files, created new library and imported photos from old lib) I don't know what else I could try. Totally uninstall Aperture and re-install it again?
Any suggestions what this could be?
On a sidenote, interestingly Logic Pro takes about the same amount of time to start. The icon bounces in the dock for almost 1 minute, then I hear the harddisk working for another minute until the splash screen finally appears. Logic Pro is loaded after 2 minutes and 20 seconds. I could boot my whole Mac 4x in that timeframe.

To everybody having this problem. I found out what the culprit was. As a documentation here is what it was.
I read some posts here on the forums that mounted USB sticks or flash cards would make Aperture super slow while importing photos. I have Boot Camp installed and have a Windows 7 partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Aperture and Logic (which also had to think 2 minutes before it decided to start) display the splash screen in seconds and start like they are supposed to.
Make sure you have no drives mounted when starting these applications. This helped bringing down the starting time from 2 minutes and 20 seconds to just a few seconds. Of course, if you have your library on another drive you have to have it mounted. Maybe it only takes so long when you have Boot Camp and an NTFS partition. But if you experience lags starting these apps, try unmounting what you don't need.

Logic Pro takes incredibly long time to start

Dear forums
I noticed not long ago that Logic Pro takes an incredibly long time to start. I know I have quite a number of plugins installed and I guess it's going through the plugin folder to initialize all of them and look for new ones. Fair enough.
But it takes 2 minutes to finally show a splash screen and after 2 minutes and 20 seconds I can finally start using Logic Pro. Is that normal or am I the only one?
Interestingly, I noticed that after the upgrade to Aperture 3.1, also Aperture suddenly took a long time to load. Also almost exactly 2 minutes and 20 seconds (and I barely have plugins in Aperture). Usually you start the software and spend some hours with it, I know. But I jump in and out of apps a lot and the loading times are quite annoying. I think 2.5 minutes are quite a loading time. I can boot my whole Mac 4x in that timeframe.
Any ideas where that might be coming from? Is that normal and am I being too picky? Thanks for a reality check

Created new user account. Same thing. Logic took over 2 minutes to even start validating all the installed AU plugins (first thing it does on a new user account). After that, another start took also 2 minutes until the "choose project template" dialog appeared.
I read some posts that mounted USB sticks or flash cards could make Aperture super slow when importing photos. I have Boot Camp installed and have a Windows 7 NTFS partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Logic and Aperture display the splash screen in seconds and start like they are supposed to. Thanks for your help. Without your suggestions I probably would have never tried this.

Installation of Yosemite 10.10.1 has severely slowed the performance of my Mac. Takes a long time to start-up and to load any apps. Any suggestions?

Installation of Yosemite 10.10.1 has severely slowed performance of my Mac Mini. Tales a long time to start, and a very long time to start any apps.

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook Pro takes a long time to start up or hangs at gray apple logo after minor fall

I upgraded to Mavericks a few days ago. Everything was working fine until yesterday, when my MacBook Pro started taking a really long time to start up or restart.
Before upgrading I had some directory problems which I fixed with DiskWarrior. I then upgraded to Mavericks. There was also a fall that I took, which resulted in the MacBook Pro hitting on one corner and getting a minor dent (It was inside a padded messenger bag when I fell). It worked fine for a whole day, but the next day it started slowing down and getting stuck.
I run DiskWarrior again and there was more directory problems, which were fixed again. When I start the MacBook Pro from an external HD with Mac OS X 10.8, there is no delay in starting up. When I switch to the internal HD, then I get very long delays (5-10min) or hangs at the gray apple logo screen.
DiskUtility did not report any problems, neither did SMART report.
Could it be that the HD got somewhat damaged and gets stuck intermittently? Is it possible to start up OK some times and others to get stuck?
How can I check the HD? Shouldn't the SMART report indicate a problem?
Any help would be greatly appreciated as this is my main work computer!
Chris

I think that my Mac was shutdown when it fell, but I am not 100% sure.
I did perform both SMC and PRAM resets. I will also try to run maintenance scripts. Thanks for the suggestion.
It keeps on taking around 10min to restart now, but it has not frozen yet.
The other very strange thing that happens (and this was the first sign I had when it started acting up) is that Mail.app cannot connect to my IMAP servers (a host provider and Google), even though my Mac connects to the internet. I have the MacBook Pro on the same ethernet network as my home iMac, and I get mail without a problem on the iMac! So something is blocking the mail on the MacBook Pro.
This happened for the first time on Friday and after that I kept having the long delays in startup or freezes I mentioned before.
Could those two be connected?
When I use an external HD as as start up I can get mail fine.

Saving Video Takes a LONG Time

Howdy, everyone. I am currently shopping around for a video editing application, and I'm using the trial version of Adobe Premiere Elements. I like everything about it so far, except for one thing. It takes a very long time to save the final video file (from the Share tab). I've noticed that it gets to 50% fairly quickly, probably under five minutes, and at that point the progress bar slows to a crawl. It takes more than two hours for the last 50% to complete. Is this unusual, or is this what I should expect?
Here's a little background of my project, in case that helps.
The video project is just under 30 minutes.
From the Share tab, I'm choosing to Export files for viewing on computers.
The type of video I want is WMV (Windows Media). I cannot vary from this format. It's a requirement of the project.
Frame size: 1024 x 768. At this time I cannot vary from this size. The video must be 1024 x 768.
Frame Rate: 30 fps
Audio Setting: 48kbps, 44 kHz, mono CBR
Codec: Windows Media 9
Encoding Passes: 1
Bitrate Mode: Constant (I've also tried Variable Quality, but noticed no difference in rendering time)
Maximum Bitrate: 200 kbps (The first time, I tried 2,000 kbps but I noticed no difference in rendering time)
Image Quality: 3 (I've also tried 90 but again with no noticable difference in rendering time)
My Laptop:
Windows XP Pro SP3
Intel Core2 Duo 2.2GHz
2GB of RAM
The window says I should expect the video size to be 53MB in size, which seems reasonable. But when it finishes, it's more than ten times larger than that estimation. I don't understand why the filesize is so large and the rendering time is so long.
Is my rendering time being governed or throttled back because I'm using a trial version of Premiere Elements?
If not, what suggestions do you all have for me? Am I being unreasonable by expecting my rendering time to be quicker than the duration of the video?
Thanks in advance for your help. Please let me know if I can provide any other details.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

Videos take a long time to open after the last quicktime update

Hey guys
Since I've downloaded the latest quicktime update videos are taking a very long time to open. They used to open instantly and now they take about 40 seconds (negligable difference if quicktime is already open or not).
This is with a Powermac G4 1.25Ghz with 2GB RAM running 10.4.10 and all latest updates.
Any suggestions on how to fix this?

I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
Chris

Videos take a LONG time to download

I am using iTunes 6 (the latest update) and videos take a really long time to download. For just one video it takes 10 minutes to download. Could someone give me some advice or tips to make video downloads go faster? Thanks.

That depends mainly on the speed of your internet connection (and on the load of the download server).
Let's say the video to download is about 200MByte and you're using a 4Mbit/s DSL connection like me.
200MByte x 8 = 1600Mbit / 4Mbit/s = 400 second (in theory) = 6min40sec

Droid Bionic takes a long time to start up

Anyone else besides me having a problem with the startup of there Droid Bionic. I timed my phone to see how long it takes to start up
and I am averaging about 2 minutes for startup...but it has sometimes taken as much as 3 minutes. Verizon told me months ago that, that is normal for 4G phones because it takes longer for the 4g "handshake" or connect with it's service. I believed it for a while but it just seemed so long so I tested against my other friends. One friend has a Galaxy Nexus 4G and we both started our phones at the same time...my friend's Nexus started in less than 30 seconds, mine took more than 2 minutes to start. My brother has a Droid 4 and he turned off and restarted his phone twice while I was still starting.
Any advice other than doing a factory reset, since I have done this already. I have .905 installed on my phone but this problem was happening before that.
Thanks...

HLLUGO,
Hi there! I understand your concern that the device takes a few minutes to power up completely. It really depends on what type of apps are on the phone and how it needs to connect to them initially. My Nexus takes about 2 minutes to power on, but a co-workers of mine takes even longer, so it varies. I wouldn't be too concerned about it unless you notice it taking more than 6-7 minutes to power up. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

AME takes a long time to start

Also, and maybe not super important to Adobe, because it IS only my time after all, but Media Encoder takes a blasted long time to load - like longer than AE. ya...

Actually, I just discovered it doesn't seem to have anything to do with OpenCL. I just put the rendering back to software only and it is doing the same thing. hangs for a long time before it starts to run. Activity monitor shows it running 85-95% CPU, 17 threads and about 615 MB of memory. Activity Monitor doesn't say its not responding, it just seems kind of idle. It took almost 7 minutes for it to start rendering.
1- Running version 7.2.2.29 of Media Encoder,
version 7.2.2 (33) of Premiere.
2- Yes, a premiere project of HD 1080 source shot with Canon 60D, output to H.264 YouTube 720, fps 23.976
not sure what you are referring to by native rendering. The rendering setting i tried now is Mercury Playback Engine Software Only if that is what you are referring to. But OpenCL gives me the same issue now.
3- H.264 YouTube 720, 23,976 - seems to happen on multiple output types
4- In Premiere, I have my project timeline window selected. Command-M, selected the output location I wanted and what output codec, selected submit to Queue. Media Encoder comes up, the project loads and I select the run icon. It preps and shows the encoding process setup in the "Encoding" window, then just sits there with no "Elapsed" time occurring until almost 5-6 minutes later, then it kicks in.

IPod 30GB generation 5 Video takes a long time to start up/load

Similar Messages

Maybe you are looking for