Ipod 3rd gen Nano.

Hi
My comp. crashed and all files lost in the rebuild. How do I get the songs off the Nano back into Itunes on the comp.
When I try it says the ipod will be erased and replaced with the library in the comp. There are no songs on the comp.
Thanks for anynhelp.
Gary

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Similar Messages

Loading songs on ipod 3rd gen nano without itunes

is there a way to get songs onto the new Ipod 3rd gen nano 8GB without using Itunes? I have tried Xplay 2.3.5 and the playlist is all messed up. It would show all the songs in my hard drive on every single playlist created, even the On-the-Go list. I would hate to use Anapod because of they limited activation status. Itune is slow, and too restrictive for me. I hate itune with a passion. So does anyone know a way to get songs onto this ipod properly with Xplay or another good program? I have tried everything i know and I am able to throw this thing against the wall. thank you in advance!

I feel your pain. I have been fighting iTunes and QuickTime for 2 weeks trying to get it so that it does not interrupt my wireless USB connection when ejecting the Nano. A simple solution would be to use another program to manage the syncing of stuff to the iPod.

Ipod 3rd Gen Nano Skipping?

So I have a 3rd Gen Ipod Nano. I only used it once for a couple weeks about two years ago, I erased all the music off of it and put it back in it's case never to see the light of day until a couple of days ago. I decided to bring it back out of it's factory case, and while it's an older model, it's still in pristine condition. I plugged it into the computer and had a couple of problems trying to install the most update ipod software onto the Nano, but evenually I got it on there. I uploaded about 60 songs and took it to the park the first song played fine then all of a sudden it begins to cut off in the middle of songs and skips completely over others. It does this for ALL songs, indescriminately it seems. I've tried quite a bit of different things...
-Deleting & Reuploading the songs onto the Ipod
-Deleting & Reuploading the songs into Itunes and then onto the Ipod
-Converting the files into AAC copies
-Automatically allowing files over 128bps to convert to AAC
-Multiple Restores
-Ensuring I have the latest updated software
-Uploading songs and doing restores on itunes from different computers with different operating systems (I tried all of this on Windows 8 as well as Windows XP)
I don't know what the deal is? It's flash software so it shouldn't have hard disk-like problems. What gives?

I don't make duplicates when I have this problem. I uncheck the song in iTunes, connect the iPod. This takes the songs off of the iPod. Then I disconnect the iPod. Check the songs in iTunes, then reconnect the iPod. This put the songs back on the iPod.
It usually works, but my iPod has been messing up so much lately that I've had to do a factory restore and when the songs get put back on the iPod a ton of different songs are skipping. It's driving me crazy.

Ipod 3rd gen nano syncing problems.

My nano 3rd gen is fine, but when I plug it into Itunes, it says it's syncing, but on the ipod, it shows connected, but it was done syncing, and Itunes apparently can't finish syncing, even though the ipod shows completion. I can't add any songs either. Please assist me in this matter.

Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to sync using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

Help me please my new ipod 3rd gen. nano isnt workign correctly!

okay so i just bought the new Ipod nano 3rd gen. (green) and SOMETIMES when i turn my Ipod off and turn it on again.... but lately it is stuck like this! i cannot listen to the sound but ands the track isn't playing on the screen and i check the volume, earbud connections and nothing..... like my music or videos won't play... viedos are black screen with no sound. and songs i can browse and looks liek song it playing but screen isnt playing (numbers don't move) and no sound.....what can i do?
should i try to get a new ipod because mine is only 10 days old!?
help.. thanks.

Hi there,
I'd suggest first resetting the iPod (check the online manual for that) and then restoring the latest software using iTunes.
Good luck!

Updating Ipod 3rd gen nano without itunes

I am trying to update the nano to V1.0.1. I have seen a 57MB v.1.0.1 of the new nano in articles, but when I go to the apple site, all i see is a link to download itunes. I do not want to install itunes for the only purpose of updating the nano. is there way to download just the update: iPod Nano (3rd Generation) software updated to v1.0.1.

This is becoming a bigger and bigger deal as we get updates with NEW bugs. We need Apple to do one of two things:
1) Offer a LIST of updates (old/new) to restore in iTunes
2) Offer a standalone updater (preferable) like I used to use with my Mini

Issues with New Ipod 3rd Gen Nano!! Please help!!

HELP!!!
I bought a new IPOD Nano for Xmas and it doesn't appear to be working.
It automatically syncs once then appears to completely disconnect, so when you then try to "apply" new settings or re-sync it fails.
I checked on "My Computer" and for the first few mins it appears as an external drive, then once again completely disappears.
This means I can't change any settings on how I want my IPOD to sync., for example adding new films that were previously unchecked...
Hope this makes sense!!
Has anyone else had any issues like this? Is there an easy way of solving this?
I've tried updating the software (which now says is uptodate) and resetting the factory settings.
I'd appreciate all the help I can get on this
My email address: [email protected]
Thanks

Hi there,
I'd suggest first resetting the iPod (check the online manual for that) and then restoring the latest software using iTunes.
Good luck!

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

IPod 3rd Gen Not Connecting to Windows AT ALL

i have an iPod 3rd Gen 10gb. I use firewire to connect it to my iPod. When i connect it, it shows that it is charging but that is all. my computer won't recognize it at all. i tried a new cable, a new firewire card, i bought a USB cable, reinstalling iPod software and iTunes, the 4 R's obviously not restoring cuz it wont connect. i basically tried everything but no luck. any help would be appreciated.

Do you use iTunes 7? If so please read the Topic I posted. Apperently I got the same problem with a new Nano. I discovered that when you attach the iPod DURING a Windows XP reboot it WILL WORK and see the iPod ...... until you disconnect again.
Please see the Topic I posted:
http://discussions.apple.com/thread.jspa?threadID=647294&tstart=0
Best regards
TheFactory

3rd Gen Nano connects and then QUICKLEY disconnects on an XP machine

Below are two postings I made in a different discussion area. The 30g iPod is now working fine, the Nano is as stated in the second post. Please to help me out? As stated below Apple says it works and it does on the wrong machine! As many of you out there know, sometimes a husbands and a wifes taste in music are different. I would like to keep my music on my machine. Thanks, reo52............
I have been running very well with my 30g Video iPod. I got an 8g nano as an award. I had just upgraded iTunes, tried hooking the nano up and now nothing works! iTunes never did find the nano. Did the r,r,r,r,r thing but could only reset because iTunes can not see the nano. Later I was syncing the 30g and was ejecting it and got a message stating it could not be ejected as there are files on it being used by another program. Did the 5R's on he 30g, the unit was syncing and the battery went low and interrupted the sync. Now iTunes can't see the 30g or the 8g. I did a reinstall of iTunes and still nothing. This is driving me to drink, HELP if you can. Thanks, reo52.............
Well, I sent the Nano in, it came back, Apple found no problems with it. When trying to sync it acted as before. With Apple on the phone I tried syncing to my wifes machine!?? I'll be dammed it synced right up!???! Well Apples says it works because it works on my wifes machine!! Well, why wont it work on my PC?!!. Both machines are running up to date iTunes, both have the same firewalls and virus programs and both are running XP with all service packs and updates installed. Now I can work around this for awhile but I have got to get that Nano to sync with my machine. Help if you can and Thanks again, reo52

To Apple,
822 unresolved problems in "Connecting 3rd Gen Nano to a Windows Machine" , 25-50% on each page are problems with connecting a Nano in Windows and getting it recognized in Windows or iTunes or syncing errors(1st 5 pages). I think this qualifies as a serious problem. Many state that their Nano works on a different Windows machines and or an Apple machine, but not the one they use. Others and myself have sent their Nanos beck and Apple. Apple states "unit works fine, can not reproduce problem, or words to that effect" then Apple sends it back! It still will not work for the customer. So who has the problem? Owners who can not use their Nano? Apple who has the owners cash but maybe not their goodwill? I do not know, but I can see a Customer satisfaction problem developing. So APPLE please do your best to resolve this situation. It could be to your own advantage and help with those 822 unresolved problems on the Nano Pages. Thanks, reo52

3rd Gen Nano click wheel won't work in the car. My OLD one worked, but this one doesn't.

I use a PXDP iPod2Car iPod interface in my 02 Firebird. My original, trusty 3rd gen. nano used to work perfectly. It charged, and the steering wheel as well as main stereo controls operated it. Something happened to it recently (my guess is the logic board went bad) and it does not come on at all, plugged in or not. I actually have 2 more just like it that I was going to give away, but decided to keep.
Neither one of these will let me use the click wheel to scroll while plugged into the car - the old one did.
I can only change songs with the car's controls.
The only difference between these two and the old one, is that they have the HP logo on the back. Are they later models, with perhaps different hardware?
Is there anything I can do about it?
Is there any hope for the old one?
I hate not being able to scroll at all!
thanks in advance!

Contact PXDP. They should know if their product is compatible with your iPod Nano.
Why won't my iPod play through my iPod speakers or car kit?

3rd gen nano. Lock click wheel volume control but NOT track control???

My title basically says it all. I have a 3rd gen Nano that I want to use solely for a car and it won't be removed. Problem? The track control has to be done on the iPod itself as the car stereo won't do it, but the volume can be controlled by the car's head unit. That said I want the iPod volume to always be on max. Apparently the volume lock feature isn't what I'm looking for, nor is the hold switch. I want to lock the volume from being controlled by the scroll wheel but still be able to change tracks using the scroll wheel... without having to go into a menu or anything. The iPod will eternally be on shuffle and any track changes will just be skipping songs... and all done blindly just by touch... hence why it's driving me nuts I keep scrolling the volume down. Hope that makes some sense. I'm long-winded and wordy but not always clear. Lol

The system won't seem to let me post this anywhere... it's saying I'm not allowed whatever that means. Exception being this community. So sorry if I pi** everyone off by listing in the wrong location.

Scosche earphones that work with 3rd gen Nano

The original earphones that came with my 3rd generation 8 GB Ipod Nano recently got destroyed and I'm looking to buy a replacement set. I'd like to upgrade to a set with better sound quality and in the in-ear style that blocks out ambient noise. I've heard really good things about the Scosche IDR655m but I notice that in their compatibility listing they only list the Nano 5th generation.
All I'm really looking for is great sound and the noise-blocking feature of the in-ear style. I really don't care if the remote or mic features work. I didn't have them on my previous set and I don't mind having to skip songs or increase/decrease volume by messing with the actual Ipod.
What I'm wondering is...would the Scosche IDR655m still work and give me good sound quality and ambient noise reduction on a 3rd gen Nano? Or is there another more basic Scosche product that you would recommend that would still give me all of the great sound on a Nano 3rd gen but without all of the "bells and whistles" of the remote and mic features?

Could be. Are the phones you want to use the kind with a mic and button (like you would use with a smart phone)? I bought some V-Moda headphones to use with a Nokia phone, and thought I could use the button to answer the phone, but every time I plugged them in, the phone would think I was trying to dial a number. The phones didn't give me any problem with my iPod Classic 160, but it was an older one. If that's what you use, maybe try some more standard phones to see.
Maybe not the problem, but all I could think of.

3rd gen nano shuts off automatically

When I dock my 3rd gen nano into my Bose portable it randomly shuts off and displays the battery charging screen on the nano.
When I press the start button the Bose remote the nano will play again for a few songs then shut off again. This doesn't happen with my ipod video.

I called Apple Support last night to make sure they are aware of this problem. While on the line, we tested a few scenarios, and it seems that the nano only shuts off automatically if the pause / play buttons are used on the Bose Sounddock remote. When I started the nano using its controls rather than the remote, everything worked fine, including adjusting the volume, skipping songs. Only the play / pause button caused the problem, but really, who knows at this point.
I also noticed this problem only after "upgrading" to firmware 1.0.2. I will try to restore the nano to its factory settings this evening (1.0.1) and see what happens.

3rd Gen Nano random shutoff requiring reset

My sister got a 3rd Gen silver coloured Nano for her birthday back in May. Since mid-September, she's been having a problem where it will randomly shut down and nothing will work to get it to turn on again except a reset, even with an apparently full battery. It's getting to the point where I have to reset several times a day, just so she can use it. I'm wondering is this is a common problem and if there are any troubleshoots for it other than continuing to reset it?
It should be noted that she's using the iPod on a computer running Windows Vista, as I'm the only mac user in the family.
Message was edited by: Taineyah

A friend gave me her 3rd Gen Nano today, and it had exactly the same problem you're having. I also tried all the Apple support suggestions, and nothing they suggested worked. (Like you say, resetting doesnt work without the menu button!) This may sound crazy, but this little trick worked:
Press the click wheel firmly, and run your finger around and around it, as if you're scrolling, pressing firmly the whole time. The screen may go nuts, but don't worry about it. Press counter clockwise several time and clockwise several times. I had to do this probably ten times, but it worked!
I guess that when dirt or debris gets lodged under one of the buttons this method can help dislodge whatever is in the way and get the button working again. It's free, easy, and definitely worth a try. It got my menu button working again when nothing else did.

Ipod 3rd gen Nano.

Similar Messages

Maybe you are looking for