IPod 4th Gen not responsive
I cant turn on my iPod, the screen remains black. I tried plugging it in, nothing happens. I tried "Hard Reset", nothing. I tried DFU mode, nothing...
If anyone experienced something like this before and may have a solution please let me know.
thanks guys!
Try the remainder (if there are any) of the following
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
basically i met my fave band and i took videos and stuff, then hours later my ipod 4th gen wouldnt switch on, i cant reset because my home button is jammed, what do i do? i really want the videos off i
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode (which erase the iPod)
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
You may be able to recovery the some info from the restored iPod by:
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html -
Ipod 4th gen not really connecting to wifi
My ipod 4th gen has always worked fine a day ago out of the blue the wifi wasnt working but then i relized it was my ipod it only works when im right next to it as soon as i walk away it disconnects i have tried everything to make it work disconnecting the router, the dsl cable, resetting the network setting,to turning off and on my ipod everything else in the house connects fine i dint know hat to do anymore and i really dont want to reset my ipod so please can i get help
If you have same problem with other networks that indicates a hardware problem. Likely a loose antenna connection
http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640 -
IPod 4th Gen not updating "played" status.
Hi, recently I'm having a problem with my Ipod touch 4th Gen. It works fine, plays music and videos normally, but it does not update the "last played" status, nor "last played date". This is a problem because I sync my videos based on "most recent not played", and I have some smartlists that make use of that statur or date too.
This happened once before I upgraded from iOS 5 to Six, but apparently was corrected; however, since I upgraded to iOS 6, none of my played items is being updated. Could it be because of the iOS upgrading, or maybe there is something else I'm missing?iOS: Device not recognized in iTunes for Mac OS X
It will not show up in Finder/Spotlight search -
IPod 4th gen not connecting to wifi?
Ok, so here is what happened,
I have had this Ipod since December 2010 I believe, haven't had any major wifi problems with it until now. the wifi has always been on and off I guess, but right now its off like never before. My mom decided to change the wifi password (ended up changing it back) and now the ipod will now connect to the wifi. I have another ipod of the same model (been around for the same time, don't ask, long story) and once the wifi password was changed back, that ipod connected just fine with no problems, didn't even have to re-input the password (same with my iPhone 4). but this ipod that im having trouble with isn't connecting. on the settings, itll say the name of the wifi as if its connected (no wifi bars) but when I go to the wifi settings, it just shows the loading spinning symbol next to the wifi name, and then it will show the same symbol next to "choose a network...", and then it just keeps doing that. It does not say "unable to connect" or anything like that. Ive reset the network settings, ive forgotten the network at least 5 times and have re-entered the password also. ive turned my ipod off a couple times, connected it to iTunes, the whole lot of it. I don't know if its just the wifi (seems considerably weaker since the password was changed, and it was pretty weak to begin with) or what. I can answer any more questions to help find a solution.
And I can not upgrade the wifi, apparently its as upgraded as it can be. But the other two devices still work, but this one ipod is just not connecting. also, the ipod is updated.Yes, it connected to another network, for some reason it wont connect to mine. I'm right next to the router, but my other devices work, so I don't know if its the network or the iPod. I took it to a store (home button was broken) and they were able to connect it to their Wi-Fi, so I guess it isn't a problem inside the iPod. But, as I said, the three phones in my family all connect, CPU connects, other iPods connect, Xbox 360 connects, my sister's laptop connects, and my tablet connects.... I just got the iPod back from repairing the home button and I reset it (wasn't able to before, assistive touch home button wouldn't let me reset) and it still wont connect. Its weird, because the Wi-Fi bars under the Wi-Fi settings will be shown blue as if its connected (It wont have the check next to it, it will only show the loading spinning symbol; I've left the iPod open and it just keeps loading, it wont say unable to connect, and obviously it wont connect) however the bars are not next to the word "iPod" at the top of the screen. also, in the man page of the settings, the Wi-Fi will not say "not connected", it will actually say the name of my Wi-Fi as if it were connected, but there is not actual connection.
Thanks, hopefully I wont have to restore it... really don't want to do that. -
TS1372 Ipod 4th gen: Not restoring in ITunes with the error 3014
Okay so when i restore my ipod its extracts the software just fine but right when its about to finish veryfying with apple an error pops up saying ERROR 3014. I have the current version of ITunes and ive tried restoring it again a couple of times with the same outcome. I dont know what else to do its just stuck in recovery mode now.
I had to view the ipod in my computer, right click, select format. This wipes the ipod, but so does a restore through itunes. When i opened itunes again it said welcome to your new ipod and let me sync again
-
My ipod 4th gen screen kept jumping this morning. Had to do a restore to factory conditions and it is working fine now. However, it originally had a factory installed Nike+ app on it and it did not install with the restore. I use this app daily with the running chip to log my workouts. Anyone know how to get this app back from Apple? Loading the Nike app from the app store is not the same thing as you need gps running continually for it to work (as with an iphone). Can't have that with my ipod unless I'm connected to wifi. Help?? Thanks.
If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod -
Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem! My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar. When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over! I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good. I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work! The iPod, the laptop and iTunes ARE all fully updated! I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing! I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol. I hope somebody knows a fix or solution! Thank You!
Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??
Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day! -
I downloaded music from my computer to my ipod (4th gen) but I can not listen to it. It shows that it is on there as files but not music is this because the music was format for a mp3. How do I convert it to play on the ipod or move it to the music file?
The iPod can play MP3 files, so that's not the problem.
It sounds like you're accessing the iPod as a disk drive, and copying files in Windows Explorer.
This is not the way to put music on your iPod. You have to install iTunes on your computer, and put your music in iTunes. Then you can use iTunes to select the music you want on your iPod. -
IPod 4th gen grayscale will not detect usb connection.
Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
Does anyone have an answer to this riddle?A bad USB hub will cause the problem ... are you using it ??
-
my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.
Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
-
My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.
Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???
Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order. -
Ipod 4th gen does not play music from list automatically. just plays one and repeats it.
ipod 4th gen does not play from list automatically. it just plays one at a time and then repeats it until i select another.
how do i set it to play all on playlist?On the left side of the Now Playing screen right below the scrubber bar is the repeat control. It is the arrowed racetrack icon. Tap the icon until it is white for no repeat.
Maybe you are looking for
-
In Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.? Anybody have any idea how to stop Mail from including my email address in th
-
Enable SSL/https on ApEx Embedded PL/SQL Gateway/11g?
Hi, I'm a newbie to ApEx. And I notice that most of ApEx applications are run on "http" instead of "https". Aren't you concerned about its security? What's your take on SSL/https with ApEx? I understand that it takes several steps to set it up on Ora
-
Array of Tab Control page names
Hi, I wish to programatically create an array of the names of the pages within a Tab Control. See the attached VI for my attempt at this. It works, but as it runs it changes which page is displayed on the front panel. Is there a way to do this withou
-
Hi can u please help me out to display multiple [b]thumbnail images[/b]
hi, hi, please help me out! please help me out!! I need to display multiple thumbnail images on the jframe or on a jpanel . From the database where the path of the images are stored say i should first get thumbnail of the images and then display any
-
I don't understand the following situation (I don't undrestand very well how nls_lang parameters work): I have an 8.1.7. release database on a linux platfrom, these are the language parameters of both the db an the only instance: CSR>select * from nl