Ipod 4th gen not working???

basically i met my fave band and i took videos and stuff, then hours later my ipod 4th gen wouldnt switch on, i cant reset because my home button is jammed, what do i do? i really want the videos off i

Try:                                               
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode (which erase the iPod)
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and                                           
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC       
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     
You may be able to recovery the some info from the restored iPod by:
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
http://www.amacsoft.com/ipod-data-recovery.html

Similar Messages

  • Ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6

    ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6?????

    Have you went to Bose's support site?
    Sometimes an iOS update breaks compatibility
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the Bose unit
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem then there is nothing you can do except see it Base has firmware update.

  • Ipod 4th gen not really connecting to wifi

    My ipod 4th gen has always worked fine a day ago out of the blue the wifi wasnt working but then i relized it was my ipod it only works when im right next to it as soon as i walk away it disconnects i have tried everything to make it work disconnecting the router, the dsl cable, resetting the network setting,to turning off and on my ipod everything else in the house connects fine i dint know hat to do anymore and i really dont want to reset my ipod so please can i get help

    If you have same problem with other networks that indicates a hardware problem. Likely a loose antenna connection
    http://www.ifixit.com/Guide/iPod+Touch+4th+Generation+Wi-Fi+Antenna+Replacement/ 3640

  • IPod 3rd gen not working with universal dock

    My old iPod 3rd gen (15GB, touch wheel, dock connector) worked great with the old dock, until the latter started scratching noises when outputting audio to my stereo. Still charges the iPod though.
    So, I tried old iPod with the universal dock I got for my Touch and found the following problems:
    1. iPod is not being charged through new dock plugged to wall adapter
    2. touch wheel menu control is not working as long as iPod sits in universal dock plugged to the wall adapter - the sound of clicks is all I get, but no control of menu or any other function. In order to select playlist or use any other function through touch wheel or any of 4 buttons I need to unplug power from the dock (it is not charging anyway)
    3. remote is not working at all
    Otherwise playback is OK.
    Any ideas what may be the culprit here? Apple states that Universal dock is compatible with 3rd generation of iPod and up.

    Hello Andrew,
    What a coincidence as I too have had to find a new dock for my 3rd gen ipod. This week I purchased an Apple AV Connection kit - but found that it would not charge the ipod or respond to the remote. I also bought and tried a Belkin AC adapter with cable to power up the ipod but it too would not charge the ipod.
    To see if these units were working I connected them to a friend's brand new ipod classic and both the Belkin and Apple AV Connection Kit worked fine - so there is something different about the 3rd gen ipod.
    I'm not sure if this helps you - but at least you know it's not just your ipod that is not working with the new dock.
    Nick M.

  • IPod 4th Gen not updating "played" status.

    Hi, recently I'm having a problem with my Ipod touch 4th Gen. It works fine, plays music and videos normally, but it does not update the "last played" status, nor "last played date". This is a problem because I sync my videos based on "most recent not played", and I have some smartlists that make use of that statur or date too.
    This happened once before I upgraded from iOS 5 to Six, but apparently was corrected; however, since I upgraded to iOS 6, none of my played items is being updated. Could it be because of the iOS upgrading, or maybe there is something else I'm missing?

    iOS: Device not recognized in iTunes for Mac OS X
    It will not show up in Finder/Spotlight search

  • Ipad 4th Gen not working at all

    Hi
    I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
    iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciated

    Hi Try this Connect USB lead to pc hold down power button on iPad  connect Lead To iPad  still  hold button down Wait to see if pc sees iPad keep button down for upto  1 Minute. If that doesn't work  make An Appointment at Apple  Store. Cheers Brian

  • Ipod 6th gen not working

    Hi there, I bought an ipod 6th gen just over a year ago, while using it, I noticed the screen get grainy just before my battery went low.  Now the screen is black and wont charge.  I am wondering if it is the battery or the ipod itself.  I never dropped the ipod or abused it anyway, I dont really want to buy another one, if this is going to happen, has anyone else had this happen, or know what the problem is?

    jeffreyfromottawa wrote:
    ipod 6th gen nano frozen, reset not working, help steps on web site no help?
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • IPod 4th gen not connecting to wifi?

    Ok, so here is what happened,
    I have had this Ipod since December 2010 I believe, haven't had any major wifi problems with it until now. the wifi has always been on and off I guess, but right now its off like never before. My mom decided to change the wifi password (ended up changing it back) and now the ipod will now connect to the wifi. I have another ipod of the same model (been around for the same time, don't ask, long story) and once the wifi password was changed back, that ipod connected just fine with no problems, didn't even have to re-input the password (same with my iPhone 4). but this ipod that im having trouble with isn't connecting. on the settings, itll say the name of the wifi as if its connected (no wifi bars) but when I go to the wifi settings, it just shows the loading spinning symbol next to the wifi name, and then it will show the same symbol next to "choose a network...", and then it just keeps doing that. It does not say "unable to connect" or anything like that. Ive reset the network settings, ive forgotten the network at least 5 times and have re-entered the password also. ive turned my ipod off a couple times, connected it to iTunes, the whole lot of it. I don't know if its just the wifi (seems considerably weaker since the password was changed, and it was pretty weak to begin with) or what. I can answer any more questions to help find a solution.
    And I can not upgrade the wifi, apparently its as upgraded as it can be. But the other two devices still work, but this one ipod is just not connecting. also, the ipod is updated.

    Yes, it connected to another network, for some reason it wont connect to mine. I'm right next to the router, but my other devices work, so I don't know if its the network or the iPod. I took it to a store (home button was broken) and they were able to connect it to their Wi-Fi, so I guess it isn't a problem inside the iPod. But, as I said, the three phones in my family all connect, CPU connects, other iPods connect, Xbox 360 connects, my sister's laptop connects, and my tablet connects.... I just got the iPod back from repairing the home button and I reset it (wasn't able to before, assistive touch home button wouldn't let me reset) and it still wont connect. Its weird, because the Wi-Fi bars under the Wi-Fi settings will be shown blue as if its connected (It wont have the check next to it, it will only show the loading spinning symbol; I've left the iPod open and it just keeps loading, it wont say unable to connect, and obviously it wont connect) however the bars are not next to the word "iPod" at the top of the screen. also, in the man page of the settings, the Wi-Fi will not say "not connected", it will actually say the name of my Wi-Fi as if it were connected, but there is not actual connection.
    Thanks, hopefully I wont have to restore it... really don't want to do that.

  • My home button on my iPod 4th gen stop working. When I push it, it doesn't feel like it moves or clicks and when I push it it doesn't respond at all. Please help.

    The question is on the top links and videos accepted

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it at an Apple store by making an appointment:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • IPod 3rd gen not working

    I reseted my iPod and now it isn't opening. I tried charging it normally for 2-3 hours and it didn't work. After, I tried putting it on the computer and the computer said that it doesn't recognize the usb driver. I tried holding the home and power button and it didn't change anything at all. I don't know what to do. i would need help. Thank you

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT5457 my ipod 4th gen is working slow

    my ipod is working slow and hangs for few seconds sometimes after updating to ios6 and some apps have stopped working too. is there any solution to this or any way to downupgrade the ios ?

    What happens when you restore the iPod as the message says?

  • IPod 4th Gen not responsive

    I cant turn on my iPod, the screen remains black. I tried plugging it in, nothing happens. I tried "Hard Reset", nothing. I tried DFU mode, nothing...
    If anyone experienced something like this before and may have a solution please let me know.
    thanks guys!

    Try the remainder (if there are any) of the following
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod 1st gen not working after update

    Doing a firmware update via itunes. I couldn't restore my ipod after it had finished doing the update.
    The error number I got was 6. And then my iPod just didn't turn on for ages, and now it finally has and won't turn off and is stuck on a the backlit blank black background.
    I went into an apple store and the man at the genius bar said because it was itunes, Apple has nada to do with it(?), and was just really unhelpful in general.
    The ipod I have is a Touch 1st generation 16GB.
    Would appreciate any help or advice. Thanks.
    Message was edited by: doboworth

    It is only available for late 2006 model iPods. The Fifth Generation iPod (Late 2006) serial number's last three digits will be one of the following: V9K, V9P, V9M, V9R, V9L, V9N, V9Q, V9S, WU9, WUA, WUB, WUC, and X3N.
    If yours is an older model, it doesn't have it, nor is it available via a software update.

  • TS1372 Ipod 4th gen: Not restoring in ITunes with the error 3014

    Okay so when i restore my ipod its extracts the software just fine but right when its about to finish veryfying with apple an error pops up saying ERROR 3014. I have the current version of ITunes and ive tried restoring it again a couple of times with the same outcome. I dont know what else to do its just stuck in recovery mode now.

    I had to view the ipod in my computer, right click, select format.  This wipes the ipod, but so does a restore through itunes.  When i opened itunes again it said welcome to your new ipod and let me sync again

  • My ipod 4th gen screen kept jumping this morning. Had to do a restore on it and it is working fine now. However, when I did the restore it did not load the Nike   app that was factory installed on my ipod. I use this app daily. Any idea how to get it back

    My ipod 4th gen screen kept jumping this morning. Had to do a restore to factory conditions and it is working fine now. However, it originally had a factory installed Nike+ app on it and it did not install with the restore. I use this app daily with the running chip to log my workouts. Anyone know how to get this app back from Apple? Loading the Nike app from the app store is not the same thing as you need gps running continually for it to work (as with an iphone). Can't have that with my ipod unless I'm connected to wifi. Help?? Thanks.

    If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
    Have you tired using the Spotlight search? Maybe you just can't find it.
    Next would be to restore a gain. First from backup then next to factory settings/new iPod.
    The Nike app you can download/install
    Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
    Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod

Maybe you are looking for

  • Seeburger Splitter Config

    Hello Experts, I have configured Seebuger Splitter as per the documentation: I am getting following error SEEBURGER BICXIADAPTER.MODULE Message entered Module (CallBicXIRaBean) and will be passed to the adapter now. 2008-04-02 18:32:28SuccessSEEBURGE

  • WS_DELIVERY_UPDATE_2

    Hi friends, I am using for the first time the function - WS_DELIVERY_UPDATE_2, it works almost fine except the it keeps giving me a message that the serial item is in EDEL status. It was not before but ofcourse  now it is. Could some one help me out

  • Setup Installer with Deployment of Postgres DB

    Hello, I am using postgres DB in my windows application.I have successfully created setup installer for my application But i want my setup installer to create Postgres Database with function as well as table.Please suggest me from where i can start a

  • Consolidated result on Bex Report

    Hi Experts, I have 10 reports of Goods Stock and Ageing of the Stock of various Plants. I want to view only the total value / summary in one report and up of the click of one result that should take me to the detail report of that particular value. C

  • Loading of master sata

    Hi Experts, I am new to BI. pls help me. i want to load the master data for 0MATL_GROUP_TEXT i have both infosource and datasource but no info object. and when i am trying fid this in the BI content i am not able to find this. how to load this master