Ipod 5 keeps getting CRC Error and temperature message

my ipod touch Gen 5 keeps getting the message that The temperature is too high and needs to cool down. So I shut it down. This message is constantly popping up whether I am 30 seconds into a song or I open my mail. But once I turn it off it turns itself back on. It will not stay turned off. my ipod has also been crashing on a daily basis too. When I look at the diagnostics the common factor is CRC Error. I have ios 8.1.2. I would also like to add that the Bluetooth function barely works and the time is never correct I try and fix multiple times a day but it usually crashes or "overheats" before I can. Please help! I haven't gotten it wet or left in the sun, these problems started after the last update. im ready to snap it in half and be done with Apple products forever.
-chels

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. The message likely means a hardware problem
Apple Retail Store - Genius Bar

Similar Messages

Can not update or restore my ipod touch, keep getting the error message 13019

can not update or restore my ipod touch, keep getting the error message 13019

Start here:
iTunes: Error 13019 during sync

HT201304 I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

AIrPlay to Apple TV before you attempt Mirroring
AirPlay Mirroring
http://support.apple.com/kb/HT5209
Trouble shooting AirPlay
http://support.apple.com/kb/TS4215

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

I keep getting download error and it does not want to download. I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

Well... what IS the error message?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

HT5242 I keep getting an error, and the Java Update will not install. What can I do?

I keep getting an error, and the Java Update will not install. What can I do?

Never mind. I kept trying, and finally when I opened "About This Mac" and clicked the software update from there (as opposed to the "Software Update" just below), the Java update finally worked.

I keep getting an "error compiling movie" message with my C100 video

I even used Clipwrap to rewrap my footage and then did a sequence in a new project where I replaced the footage that's there with the footage that was clip wrapped. On first attempt I actually got a successful export. That was the last of that. From that point forward I keep trying to export it and it wouldn't work. I'm trying everything. Media Encoder, reinterpreting footage as progressive but maintaining the frame rate. I always have this issue with the C100. I shoot in PF24 (23.976) and the NLE always reads it as 1080i and 29.97 even though it's 23.976 and 1080p. So I try doing a new sequence (Arri 29.97) and (Arri 23.976) and interpreting the footage to be progressive. I keep getting this error and it's bad. HELP me!!!!!!!!!!! I can't seem to export a darn thing even when I leave it as interlaced. It worked once but never again and no the second time I exported I didn't change a thing so it wasn't because I interpreted the footage, that came later.
I really need to export my video to my client and this error just keeps right on coming! I need serious help here!

randers4,
Thanks for your suggestion. I started to sign off, but was uncomfortable deleting iCal data from my iMac in case there were old entries not sync'd to iCloud. So I decided to only delete Notes data from my iMac.
I first checked Notes on different devices and saw that they contained more data than my iMac, so I was pretty certain this is what I had in iCloud (another way would be to log on to icloud.com). I then unchecked Notes under System Preferences>iCloud, which prompted me to delete Notes from this Mac. I clicked on Delete from Mac, allowed it to finish, then clicked on the Notes checkbox again, and it sync'd the data from iCloud back to Notes on my iMac.

I keep getting password error and I've changed my password 3 times

I keep getting password error when I try to get a new app or a book from iBooks?

I was having a similar problem before I realised that the reset password page was for US iTunes Store rather than the Australian one (the one I actually use). Changed it by clicking on the little flag in the bottom right hand corner and it suddenly stopped giving me the timed out message. Hope this helps.

My ipod photo keeps getting an error message to contact support. won't hold a charge and locks up.

I pod photo locks up, keeps getting error message to contact support. and won't hold a charge.

TR16 wrote:
Called service provider, took to a cell phone repair shop, out of warranty and want to fix this **bleep** pearl 8130 by myself so i don't have to purchase another one (not sure i ever will after the last 3 hours of trying to fix it myself.
White screen when connected to a charge. At times it has a battery with a flash through it and at times an error code comes up. it does not hold a charge for long.
i've downloaded the newest software updat (i think)
i've tried the application loader in desktop manager.
taken the battery out and back in.
Does anyone have any suggestions for me before i throw the phone out my window????
What happened when you tried putting different battery in it? Did you ask to borrow one to test from the carrier?
Or did you purchase a new battery and try it?
Do you have the right battery for this series phone and is it an OEM Blackberry battery?
See the picture below to make sure you have the right battery (note label color)
Let us know.
Thanks,
Bifocals
OEM BlackBerry C-M2
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

TS3694 I am trying to update software for my older IPOD touch. keep getting either -1 and/or -5000 errors and wont update

I am having trouble updating software. keep getting error -1 and -5000 codes and stops update. can't get new games without update on software. any help greatly appreciated.

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Maybe
Backup error (-5000): Apple Support Communities

All the music is gone from my iPod & I keep getting firmware error messages

I left my iPod (iPod Classic, 80GB, purchased May 08, I believe it's the current generation) to charge overnight and this morning I wanted to sync it up to get some podcasts that had downloaded overnight. After I did the sync, I ejected the iPod and removed it. When I removed it, everything was gone from the iPod. No music, no podcasts, nothing. I plugged it back in and got this message:
-iTunes cannot read the contents of the iPod "Sven". Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.-
(Sven is the name of my iPod)
So I tried to restore it and iTunes said it needed to download the firmware. So I downloaded the firmware and the firmware did not install. (I didn't write down the error message.)
I ejected, plugged back in and tried again. Now, when I plug in the iPod I get the error message from above ("iTunes cannot read...") and when I click restore, I get the following message:
-The iPod "iPod" could not be restored because the firmware file could not be found.-
I've tried this a few times. Does anyone know of anything that can be done? I am still under warranty, but the closest store is about 50 miles away and I'd like to fix this on my own if I can!
Thanks in advance for any help

Have you had a chance to look at this troubleshooting page? What to do if iPod can't be updated because the firmware file was corrupt or not found

When I go to may Apps section, I keep getting "Download Error" and I cant reload my applications

Here is a screen shot of what keeps happening.
I have uninstalled and reinstalled my Cloud several times, but it keeps happening.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Also... after uninstalling, you need to run the cleaner to get rid of ghost fragments
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Keep getting "Fatal error during installation" messages on install of 7.0 SP1

Hi,
I keep getting the following error on installation (dialogue box) on Win2K
of WLS 7.0.1.0:
"Fatal error encountered during file installation. The installer will now
cleanup and exit! [file size error for E:\ ...]"
While this looks like an obvious file download error I have pulled down the
full download 3 times and the network download once and it keeps happening.
Note that when the installer first starts it says it's doing a checksum
check and this passes OK. The errors only occur during individual file
installation. What's more is that it occurs at different points in the
install process (any time between about 20% and 60% completed).
Weird. Note that I have previously had WLS installed on my system before.
Any ideas much appreciated.
regards
--malcolm

Hi Malcolm:
you were getting -- "[file size error for E:\ ...]"
the installation worked on the C: drive.
> Yes I have a number of partitions C: thru E: with D: being System part (C:
> is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
> used 10GB and 1.5GB free.
Since I cannot see your system and explore the used and free space, and I am not a
Windows 2000 file management expert, I can only speculate on the causes.
Maybe your E: drive is very fragmented and Windows cannot find enough clusters or chunks
to let this complete. The Win95 partition is a FAT16 format; the others are NTFS.
Perhaps there is more free space on C:, or Windows can better get what it needs when
allocated in smaller portions.
Where is the "platform701_win32.exe" file when you execute it?
I am wondering if it is stored on a FAT16 drive.
Are you using PartitionMagic? Can you give more space to E: or change cluster sizes?
I asked about the swapfile because I am thinking about areas that grow and shrink, and
could cause trouble at varying points as you described. So, there are TMP and TEMP ?
Later,
Wayne
Malcolm Robbins wrote:
"Wayne W. Scott" <[email protected]> wrote in message
news:[email protected]...
Malcolm Robbins wrote:
Wayne,
are you there? Any ideas?Yes. I didn't see any follow-ups for awhile, then I was very busy at theoffice.
Your downloaded file is probably okay, but I will compare to one of mine.
Including yours here for my own reference.
====
file = platform701_win32.exe
checksum = 3657019252 (as reported by cygwin)
size = 283,279 KB (win2k) or 290076933 bytes (as reported by cygwin)
====
"Fatal error encountered during file installation. The installer will now
cleanup and exit! [file size error for E:\ ...]"
* I'll bet you are running out of space on the E: drive!
Is E: one of your partitions? How much free space is on it?Yes I have a number of partitions C: thru E: with D: being System part (C:
is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
used 10GB and 1.5GB free.
Are you telling it to use the E: drive?Yes.
Can you use C: ?I suppose I could try, if that matters ???!!!
--- I just tried it and it all worked!!! Why is this? I don't really want
to keep it on C:
Where is the Windows swapfile?It's on D:
Please search your system -- all drives -- for 'registry.xml' and show
what is found.
Wayne

My itunes stoped working so I deleted it and now I can't get it to load I keep getting an error and to try again

I got this error while trying to install itunes can anyone help me, I am without itunes on my computer and can't get it to install same error everytime.
an error occued during the installation of assembly policy 8.0 Microsoft. VC80.CRT. type="win32.policy".version="8.0.50727.6195" public KeyToken="1fc86369a1e18e36" processor Artechiture=:x86"' please refer to Help and Support for more information. HRESIT:ox
there maybe more to the error but thats all I could read.
HELP ME PLEASE
Don

Cloud with down arrow icon should allow for download, if not...
Try turning iphone off, then back on. If not, try resetting. Hold home and power button approx 10 seconds until apple appears. Back to app store and click search and look in purchased apps, or just search for your app. Should be able to download, unless it was pulled from the app store, and no longer sold.

Why do i keep getting these errors and how to fix them?!?!?

first time i tried inserting a spry data set using a XML source i got the message "expected equal sign(7,10)". since i could not figure out how to fix it a started a new. this time i am getting the message "unterminated entity reference, 'm'(25,27)". i really want to get the 2nd message fixed because the xml sheet is exactly how i want it.
also is there a place where i can look up what all these messages mean and get a clue as to what is wrong?
thanks.
Mori Lina

i don't have <td> anywhere. here is the 2 sets of code that i am using.
XML
<e-coupons>
<coupon>
<store>Joanne's Clothing</store>
<image><img src="joannescoupon.jpg"/></image>
<description>Custom made clothing.</description>
</coupon>
<coupon>
<store>Mommy + Me</store>
<image><img src="mommycoupon.jpg"/></image>
<description>Whether you're getting ready for a baby, or trying to keep up with an infant, we have everything that you need.</description>
</coupon>
<coupon>
<store>Music Haven</store>
<image><img src="havencoupon.jpg"/></image>
<description>We know better than anyone else that everyone needs a soundtrack to their life. Come visit us and we'll start you on your way to walking to your own drummer.</description>
</coupon>
</ecoupons>
HTML (this is only the body part of it)
<body>
<div spry:region="ds1" class="SpotlightAndStacked">
<div spry:repeat="ds1" class="SpotlightAndStackedRow">
    <div class="SpotlightContainer">
      <div class="SpotlightColumn"> {image}</div>
    </div>
    <div class="StackedContainer">
      <div class="StackedColumn"> {store}</div>
      <div class="StackedColumn"> {description}</div>
    </div>
    <br style="clear:both; line-height: 0px" />
</div>
</div>
</body>

Why do I keep getting this error and how do I make it stop?

Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.5.0.142
Application Timestamp:          4e9243f2
Fault Module Name:          rlls.dll_old_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          49008aaf
Exception Code:          c0000005
Exception Offset:          100297c3
OS Version:          6.0.6002.2.2.0.768.2
Locale ID:          1033
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Such an error caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Ipod 5 keeps getting CRC Error and temperature message

Similar Messages

Maybe you are looking for