IPod (5th Gen) doesn't autoplay in car

My wife's new iPod Touch (5th Gen) does not autoplay with her Pioneer headunit (AVIC-5000NEX).  You have to either press play each time on the head unit or on the iPod itself.  She had no problems with her old iPod classic, but as it began to die, we had to replace it with a Touch. Any suggestions are greatly appreciated.

- First reset the car system
- Contact Pioneer and see if it compatible with the 5 G with iOS 8. Sometimes they are not.
Also, sometimes this works:
- Reset the iOS device. Nothing will be lost      
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings                            
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                               
iOS: Back up and restore your iOS device with iCloud or iTunes      
- Restore to factory settings/new iOS device.                       

Similar Messages

  • My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
    Do this to transfer info
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

    I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
    My battery then ran out, and my iPod was dead for two days.
    My iPod charging cable wasn't working, so i went out to buy a new one.
    After charging it with the new cable, it would not connect to the internet.
    My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
    I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
    Is there any way to fix this?

    If not this
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod 5th Gen says it is synchronizing, but it doesn`t. What can I do?

    I have been gifted a used iPod 5th Gen, and at first everything worked fine, it charges, when connected to my computer, the first sync was also fine. Now I have added some new songs to my iTunes  and want to put them also on the iPod.
    Here comes the problem:
    when I connect it to the computer, it starts charging, it also says, it is synchronizing, but only for a few seconds.. The new songs are not on the iPod.
    Tried to set it back, but the problem is still there..
    What can I do?

    Hi 747er,
    Welcome to the Apple Support Communities!
    I understand that you have an iPod nano that you would like to add more music to from your computer, but the syncing finishes without moving the music to your iPod. In this situation, I would recommend reading over the attached article that explains how to sync your content, to ensure that your sync settings are correct. 
    Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
    Best regards,
    Joe

  • Ipod 5th gen, video 30bg, will sync/restore, won't play

    I am running Windows 7, with all updates (as of 3/14/2014) have itunes 11.1.5.5 showing no available updates. When I plug into the USB port, the ipod gets recognized, Itunes starts. I can see the files on the ipod. I have reset the ipod and restored. Same problem. When I drill down to the actual file I want to listen to, it doesn't play. On the screen the icon changes from pause to the arrow for play, the index line never advances. You can hit the select button, use the scroll wheel to advance through the file, and hit play again, but no noise. There isn't noise if in the dock (which other ipods and iphones work with in the house) there is no noise if the headphones are plugged in. i was thinking harddrive, so I replaced it. couldn't get the new one to function. When the new harddrive was in the unhappy face would come up. I could force into disk mode, in hopes of restoring it, but in disk mode, neither windows and hence itunes would recognize it as an ipod. I put the old hard drive back in thinking maybe I damaged the cable, but it came right up, but with the same problem, it won't play the sounds... I replaced the Zif cable just in case, still the same...
    i've sure seen lots of Ipod 5th gen video for sale on Ebay, compared to the 4th that I had, which I broke the scroll wheel cable on, but never had such problems with it. Any thoughts out there from someone who might know what it's doing? It seems weird that it loads the music files, and deletes the music files but won't play them. The only other thing I can think of perhaps is the battery too low to spin the hard drive up to play? It does seem to be a very small (physically) battery compared to the 4th gen... but it is thicker...
    When I got it it was doing the low power thing, so I did all the steps to re-charge, and restore, but it won't play the files... Thanks for any thoughts!
    Jesse

    It sound like you did some good troubleshooting.  Thanks for providing the details.  I don't think a problem like this is related to the battery. 
    With a 5th gen iPod (early version) that has a 30GB hard drive, it may have problems using a larger capacity hard drive.  That may explain the different problem you had when you replaced the hard drive, if you changed the capacity.
    Try the following test.  Do another Restore from the iPod's Summary screen in iTunes.  At the end of the Restore process, choose NOT to sync anything automatically. 
    Go to the iTunes Store and download a free song.  You can find the current free songs by clicking Free on iTunes under QUICK LINKS, on the iTunes Store Home screen.
    Manually load that ONE song on the iPod.  Disconnect iPod and try to play that one song.  Does this same problem occur?

  • IPod 5th gen not charging

    Hello guys. Today I connected my iPod 5th gen to the charger and I noticed it wasn't charging. This started today. Someone please help me. I appreciate every tip and help I recieve.

    Hey Suhey, first inspect the charging port, your looking for foreign debris, lint, dirt etc. anything that could be blocking an electrical connection, if you see something try to carefully remove it. Just be careful not to touch or bend or damage the pins. If you must use a wooden toothpick to remove any foreign debris from the port and inspect the port for visible damage, cracks, missing pieces, etc. If not the issue, then try a different cable. The lighting cables have a history of breaking, shorting out. They will look just fine, but not work. If not the issue with the new cable try a different charging device. If still not working, attempt a reset, press and hold both the power and home buttons until the Apple logo appears, about 10 seconds +/-, then release both buttons.  If you can still turn on your iPod go into Settings>General>Reset then tap Reset All Settings. If still not charging connect to your computer and make backups of the stuff you have on your iPod then Restore from Backup last resort, Restore to New. If that doesn't work try letting your iPod drain completely, go dead then attempt to charge. If still not working, contact your Apple store or Apple Genius Bar and have your iPod evaluated. Good luck, Cheers.

  • My iPod 5th Gen (2005-06) will not accept charge when I need to update it. What do I do?

    I was recently given an old iPod (5th gen from 2005-06) and I went to update and iTunes told me to charge it on a wall socket to complete the update, however when I plug it in it no longer receives power. It did before the update but now it doesn't and my iPod no longer works. All it does is display an image of a plug going into a wall socket.

    Try here.
    iOS: Device not recognized in iTunes for Windows
    I would first try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Ipod 5th Gen 60Gb keeps resetting and... (please read)

    Hi everyone.
    My ipod 5th gen 60Gb keeps resetting itself when plugged to the wall charger.
    Once it starts again it gives me the sad face and the "Very Low Battery" screen.
    Tried to reset it and i gets to the screen that tells me to connect to itunes for restore.
    When i do that itunes won't see my ipod.
    How can i fix it? How do i get to finally restore my ipod? Is that an hardware problem? I did replace the battery and it finally has power for hours but i still have this tooth to pull out.
    Can anybody help me please with some suggestions/solutions?
    Your help would be really appreciated! Thank you!

    I forgot to say: When i plug it it it gives me the apple for 5 - 6 seconds, the the SAD FACE with the link to the apple support page, then the "Very Low Battery" screen, then it restarts again and it does the same thing over and over again.
    I can put it in disk mode, yes it will charge but if i attempt to plug in to the USB2 port (rear) of my computer with itunes open, it doesn't get recognized.
    The hardware management of windows sees the ipod once i put it in disk mode. Then after 30 secs more or less it restarts and windows tells me the ipod device has problems.
    Help PLEASE!!

  • NO CD came with iPod 5th Gen. Model MA146LL

    I got my iPod 5th Gen. today model number MA146LL. I was saddend when I got home (about a two hour driver from the store) to find it did not have the software CD enclosed any idea where I can obtain a copy or download all that is on the cd? Please email me direct at [email protected]
    Thanks
    Patrick

    It seems odd that you downloaded a version of iTunes your pc can't use. Sorry for asking the obvious, but are you sure you chose to download the pc version of iTunes? I suppose there could be a slim chance your browser may have not been correctly identified by Apple and it may have given you the Mac version of iTunes which obviously won't work. Make sure the file you are downloading is the .exe version, that's the one you need.
    To the original poster, don't be too sad that your iPod doesn't come with a cd. Now the brand new 5.5G ipods do not come with a cd at all. Now that you can just download iTunes with the iPod updater built in, packaging the cd with any current iPod is just a waste.

  • IPod 5th gen headphone jack not working

    I Have the iPod 5th gen and only today the headphone jack has stopped working. When I plug the headphones in it is as if the iPod just doesn't see them and carries on playing music from the iPods speakers and not the headphones. I have no clue what it is doing or any idea on how to fix it.

    Hey Katie, as Philly Phan has stated there is a tiny switch inside the headphone port. If it gets stuck open your iPod will think the headphones are plugged in. The plugging / unplugging generally will free the switch. Also, try looking inside the port, your looking for foreign debris, like lint, if you see something try blowing it out or carefully remove it with a wooden round toothpick. Good luck, Cheers.

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

    I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
    When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
    Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
    -Kingofbytes

    Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
    Her 30GB = v1.2.1
    My 80GB = 1.0.2
    Mine is newer by about 6 months. Both are the latest software according to the screen.
    Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

  • My ipod 5th gen wont let me download apps on the app store. im on ios7 and signed in

    my ipod 5th gen wont download any apps from the app store. i am signed in. whenever i tap 'free' and then 'install' it comes up with a round loading sign but does not ask me for my apple id i cant update apps either. please help.

    iOS 7: Common Problems Users Have and How to Fix Them | Digital Trends

Maybe you are looking for

  • Line Art in Acrobat 5.0

    I was recently looking at some engineering drawings in Acrobat 5.0, and I was reminded of how that version would render lines at some level of gray when they are zoomed to less than one pixel wide. In my opinion, it looks really nice, particularly wh

  • Function in free Adobe Reader apps for iPad (highlight pen)

    I wonder for the free Adobe Reader apps that I can found in Apps Store. Do its function are the same as those normal Adobe Reader, which is designed for using on PC / laptop? Any function in the free Adobe Reader apps will be missing due to the desig

  • Secondary ECess Not flowing while posting PART 2

    Dear All, While capturing and posting excise invoice in MIGO, the Secondary Ecess value is not captured or posted. but BED and ECESS is caputured and posted correctly. I have maintained all the settings including Excise defaults with condition type J

  • Adobe premier CS6 not Linking

    We are using adobe premier pro 6.0.2 on Apple lion os 10.7.4, we have been facing issue recently when working on a project the files are getting unlink, Eg: when working on project A with all files linked , we close and open Project B. Afterwards we

  • Console OutOfMemory problem

    With the 8.1 sp1 I get out of Memory errors when using the console over long time (several hours) on Windows XP I monitor a 8.1 SP1VM running on a Linux machine. I got the same problem in 8.0 (more frequent) but not in 8.1, but now it look like it's