IPod (60 gig video)  w/Backlight always on

Will having the backlight always on damage or reduce the life of my iPod? I use it at work in a cradle with AC power 10 hours a day, and would prefer to have the backlight always on ....
iMac   Mac OS X (10.4.8)  

When it is in the dock it does not use the battery. My wife leaves her back light on in her dock 24 hours a day and has had it like that for almost a year. You should not have a problem. I would recommend not leaving it on when you take it out for portable use. That will drain the battery fairly quickly.
Mort

Similar Messages

  • Ipod 30 gig video locked on lang. screen

    I have a 30 gig vid. that won't do nothing. It's locked on the language screen and nothing works, I've tried everything. Can anybody help. The R's Didn't work

    You may STILL need to reset it and are either not using the HOLD switch in the reset routine or not holding the buttons long enough (it can take longer than you would think when sitting there holding them).
    Slide the hold switch from OFF to ON back to OFF then immediately hold down BOTH the center and Menu buttons for a good 15 seconds minimum or until it restarts with the Apple logo.
    Resetting isn't always effective once and you may need to retry it several times to get it to work.
    If you reset and you still have an issue, you may want to next attempt a Restore of the iPod.
    Patrick

  • Ipod 60 gig video sync error messege(-68)

    i just bought a 60 gig ipod video it doesnt sync all the time i get the error messege that says (-68) and then it begins to delete some songs off my ipod i dont know whats going on i purhcased it online so i cant return it also i have a mini and that syns fine im using the latest itunes(7.3)please help thanks

    Have you tried the basics?

  • Ipod 30 gig video loses charge.

    Just got a brand new 30 gig 5.5gen ipod. Charged it fully and turned it off and pressed the hold button to lock it. Left it over night, and when I looked at it in the morning, the battery was totally drained. I tried again the next day charging it fully, then turning it off and locking it again. Same problem. Battery was totally depeleted. I didn't even use it once. This can't be right? Should I return it?

    Yes, the problem with your iPod is a bad battery. You will need to take it back or send it to apple 4 repair.

  • Ipod 60 gig video

    every time I plug in my ipod I get a blue screen that says badpoolheader. Any ideas? I am running windows XP.
    TIA,
    Mike

    If all that is working correctly, try connecting the iPod and see if you get this blue sreen. Try looking to see if iPod is listed in "My COmputer" if you can.
    If you can't disconnect it and try setting the iPod to "Manual Disk mode" http://docs.info.apple.com/article.html?artnum=93651 then connecting it to the PC and see if you still get the blue screen of death

  • New Ipod  60 gig Video Causing PC to run extremely slow when connected....

    Whenever i plug my ipod chord into the usb slot the computer runs terribly until i pull the chord out...has anyone ever heard of this problem before? **i am using usb 1.0 right now and am unable to put 2.0 on** (could that be the problem??)
    When i try to "update my ipod" with the software it came with it freezes until i again pull the plug out of the bottom of the device....should i contact apple? can anyone help me out?
    Thank you, and merry christmas to everyone

    Unless you are running Windows XP on a very old mother board, you should have USB 2.0?

  • Itunes 7.02.16 & Ipod 30 gig Video 1.2.1 Win XP - unable to update

    As I update my libary Itues workd flawlessly and then I connect my Ipod and I get a windows message "ITunes has encountered a problem and needs to close. " when I check on the Debug and it is a problem in the DLL.
    I check my ipod and it was partially updated.
    Whant do I need to do. It did not happen with the 1.2 Ipod software - great update
    Windows XP Pro Windows XP Pro

    I get "The iPod "name" could not be updated. An unknown error occurred (1417)".
    some folks have been having some success with the 1417/1418 using eboncairn's technique:
    eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

  • Ipod (30 gig) will not start up!

    Greetings.
    I was updating my ipod, window (iTuens) appeared saying "finished updating". I noticed the screen (ipod) had the initial black screen with the white apple. It never went any further. I tried the restarting it but no luck.
    I tried resetting it, with same results.
    Now my ipod seems to be dead. Nothing turns it on.
    I tried hooking it up to the usb, charger, and nothing detects it.
    Any advise?
    Thanks,
    Rams
    Ipod 30 Gig Video   Windows 2000   Video

    Try these.
    My iPod won't turn on.
    My iPod won't wake up.
    iPod touch-wheel is unresponsive after waking from sleep.
    iPod battery doesn't charge.
    When restoring the iPod, it's recommended to put it into disk mode first.
    Putting iPod into disk mode.

  • 30 GIG Video iPod, Video Options not available - Please help!

    Hi.
    I have a 30 GIG iPod Video 5th gen, with the latest iPod updater software installer on it.
    But when I look at the iPod preferences, when it's plugged in via USB, all Video options (manual vs automatic etc) are all greyed out and not available for selection.
    And I can't drag any videos onto the iPod (even with the right video format!).
    It's like the iPod itself doesn't recognised that it is an Video one, like it has a complex and can only deal with music and photos.
    Can anyone help or offer advice?
    Anyone had a similar problem?
    Any help would be greatly appreciated.

    Thanks for your help guys.
    Even with the iPod set to manual, I couldn't drag iPod format videos directly onto it.
    Did a factory restart, and it has fixed the problem.
    And just a note; the options in the video tab will always be greyed out, when the iPod is set to manually update songs.
    cheers!
    bc

  • Loading DVD's on 80 gig Video Ipod

    We got a new 80 gig Video Ipod for christmas and want to load our DVD's. We tried down loading a software that didn't work. Can someone make recommendation of an easy software that works, and since I am not real computer savvy any detailed instruction would be appreciated.

    There are plenty of good free programs out there. Here is a link to a discussion on just that free programs for mac and windows. http://forums.ilounge.com/showthread.php?s=&threadid=123067
    You really do not need to pay for a program and if you do choose to do so consider another product then the one from that is recommended by Spammers... that would be cucosoft. They are all over these threads. There are also some great pay programs out there. But again, try the free ones first. Then if not do a search and you will find many, many pay programs out there from companies far more reliable then the one recommend by the SPAMMER on this thread.
    Also another free program that works well is this one:
    http://www.squared5.com/svideo/mpeg-streamclip-win.html

  • FROZEN 60 GIG Video iPod

    I have a brand new 60 GIG Video iPod. The iPod froze during the import of new music and video files. The display has the "Do not disconnect" icon and label shown in the display. Attempting to reset the iPod using the instructions from Apple's support site for iPod issues - the five R's, the iPod will not respond to any of the options provided. Is there another solution to reset the iPod or is this one just destined to be replaced under warranty?
    -Kevin
    Titanium PBG4 400mhz   Mac OS X (10.3.9)  

    Repeated attempts at following Apple's technical support documentation of the "five R's". Interestingly the sequence did not work initially, but recovered after several attempts.

  • New 80 gig Video iPod and Handbrake problems

    I just purchased a new 80 gig Video iPod. I took one of my DVD movies that I own and used Mac The Ripper and DVD2One to get it onto my Powerbooks Hard Drive. I then used Instant Handbrake to make it iPod ready. It loaded fine into iTunes 7 (with the newest updates) and also played fine from within iTunes. When I went to sync it up with my new iPod iTunes gave me a message stating that this movie is not the correct format for this iPod. So I then tried using the full version Handbrake and got the same message. I know that either of these should work because I set a friend up with these same programs and we put his movies onto his 5th Gen 60 gig iPod without any problems. However, I researched iPod video conversions for the new iPods on the Apple website here and learned that there is a feature in iTunes 7 under advanced, when you highlight a video, you can go under Advanced and click on Convert Selection for iPod. Is this something that I'm going to have to do everytime, or does someone know an easier way to put MY DVDs into iTunes for my new 5th Gen 80 gig Video iPod? Please help because this process takes waaaaaaayyyyyyy tooooooo long!

    Is this something that I'm going to have to do everytime, or does someone know an easier way to put MY DVDs into iTunes for my new 5th Gen 80 gig Video iPod? Please help because this process takes waaaaaaayyyyyyy tooooooo long!
    It all depends on what your target settings were and whether or not you were attempting to incorporate Baseline LC Profile features into your movie. Basically, if you use the H.264 codec at VGA resolutions or with video data rates which exceed 768 kbps or wish to include chaptering, then you will have to use QT Pro v7.1.3/iTunes 7 conversion (or the latest version of ffmpegX or ViddyUp!) to create an LC iPod compatible file. (MPEG Streamclip and probably HandBrake programmers are still working on their LC upgrades.)

  • "White Screen" error after most recent update 60 gig video iPod

    I just received the most recent iPod updater software. I installed the updater and ran same. After the update process my 60 gig video iPOD cannot be recognized by my MAC G5. It has a "White Screen" and WILL NOT turn off! When I attempt a reset it simply gives me a 2 or 3 tone beep (I've never heard the tone before). The screen goes dark and it reboots to a white screen. I've re-installed updater and iTunes. I've switched USB ports. I've shut down the computer as well as rebooted same. I've allowed the iPOD to fully discharge (which happened quickly since the screen will not blank). When the unit is plugged into the USB port it charges and the white screen reappears. The updater now refuses to see the iPod so I cannot reset to factory defaults. Any ideas?
    The idiots at Apple instituted a 24/7 chat tech support line for iPod shuttle owners. The guys like me who paid the big bucks for their best product get stuck out in the cold! Apple's whole tech support schtick is barely one step ahead of Dell's! The charge premium prices for their product and I like Apple a lot, but their demand that you be either an Apple Care customer or .MAC user to get even rudimentary support *****!

    I just received the most recent iPod updater
    software. I installed the updater and ran same.
    After the update process my 60 gig video iPOD cannot
    be recognized by my MAC G5. It has a "White Screen"
    and WILL NOT turn off! When I attempt a reset it
    simply gives me a 2 or 3 tone beep (I've never heard
    the tone before). The screen goes dark and it
    reboots to a white screen. I've re-installed
    updater and iTunes. I've switched USB ports. I've
    shut down the computer as well as rebooted same.
    I've allowed the iPOD to fully discharge (which
    happened quickly since the screen will not blank).
    When the unit is plugged into the USB port it
    charges and the white screen reappears. The updater
    now refuses to see the iPod so I cannot reset to
    factory defaults. Any ideas?
    The idiots at Apple instituted a 24/7 chat tech
    support line for iPod shuttle owners. The guys like
    me who paid the big bucks for their best product get
    stuck out in the cold! Apple's whole tech support
    schtick is barely one step ahead of Dell's! The
    charge premium prices for their product and I like
    Apple a lot, but their demand that you be either an
    Apple Care customer or .MAC user to get even
    rudimentary support *****!
    Ok, for all the others out who experience this problem....I spent about an hour on the phone with Apple. You have to go to their SECOND level of support to get an answer. But there is a fix.
    If you have a white screen and the unit beep 3 times after a reboot here's what you need to do to fix the problem. Warning all you data will be lost. It will have to be downloaded via iTunes again!
    Disconnect the iPod from the computer. Hold the Select and Menu button down for about 7 seconds to until you get a beep. Then hold down the Select and PLAY button for 10 seconds. This will put the unit in hard disk mode. Wait awhile until the Apple screen goes away and if you get a progress bar wait until it is gone.
    At this point it will take some finagling, but you basically hook the iPod back up to the computer and do a RESTORE. The iPod should be recognized by iPod updater. Your data MAY still be in place, but if you do not do a restore to factory defaults with the updater you will get the white-screen-three-beeps-problem again.
    Once you reboot into the language screen you can reconnect the iPOD and download your data from iTunes.
    I complained this info SHOULD be posted online. They guy was very nice and agreed but said that engineering was still collecting data. He thought it was a dumb idea not to post online or allow the first level support guys to fix the problem.
    Hey Apple...if you read this how about collecting data on your goddamned time and at your expense. You're the SOBs that collected $399 for the product! Ever seen the Comcast or AOL video on YOUTUBE? You guys could be next!

  • New ipod 60 gig with video problem

    I've converted several of my dvd's to watch on my brand new 60 gig ipod and using itunes placed them properly into my ipod. Each one plays for about 30 seconds, then stops, then resumes but with no sound. I have seen other posts related to version 1.0, but my new ipod came with 1.1 already installed. Any ideas on how to resolve this problem. Is Apple working on a fix for this "known" problem that seem to just affect the 60 gig video ipod? Any suggestions would be helpful. Thanks...

    The fix has been out for several months.
    iPods with software version 1.1.1 or later no longer experience this problem.
    Update your iPod to software version 1.1.2...
    iTunes
    iPod Updater
    Update iPod's Software
    See this as well...
    http://docs.info.apple.com/article.html?artnum=303318
    btabz

  • 30 gig video, podcasts crash the ipod with iTunes 7.0.1

    has anyone had their ipod crash only when playing podcasts? short podcasts are fine, but 50 minute or more, crash and restart the ipod. playing music is fine.

    I have noticed two things with my 30 gig Video Ipod since i updated the software thru iTunes 7. First all my podcasts syncs that are happening with Album artwork are crashing the iPod and making it restart and the second is that it has also affected some songs albeit selectively. I tried turning the album artwork off and only once did one of the five podcasts i downloaded did work!
    All the Podcasts or most of the ones that I had downloaded before iTunes 7 updater for iPod do tend to work but there is no pattern.
    The reason I love apple and my iPod is the sheer magic of podcasts that are my companion and daily dose of caffeine en route to work...and I hate to get any glitches.
    Can somebody walk through the step by step procedure to correct this or does one wait for another update from Apple?

Maybe you are looking for

  • Revaluation -Reconcile AP control account with GL

    Hi , In oracle , currency revaluation is done in GL. All the AP invoices accounting entries in foreign currency are posted to GL . When we revalue foreign currency journals in GL the control account value (AP Liability a/c) chances. Then how to recon

  • Restrict the views in material master

    Dear Experts, In Material master(MM01), how to restrict the views like Basic data2, General plant data storage2, accounting2 views in which we are not entering any data. How to restrict these views while MM01 creation,only useful views shall come. Th

  • Hyperion, Oracle, and password expirations ???

    We're currently in the process of trying to change our password policy for some reporting databases we have that are only accessed by users (non-developers) for developing hyperion reports using the desktop client software. We've set up an Oracle war

  • "sql_select"- command - What's wrong at this code ?

    Hello everyone, on the zip-attachment is a simple sample vbs-code and the sample-db. Whats wrong by this sql_select command ? The error-box ist is shown as the jpg Thanks every one for answers! System: DIAdem 8.1, Win2K,A97 all german Attachments: sq

  • Updating to Mail 4.3

    Hello, I currently have Mail 3.6 loaded in my home iMac, but my work Mac mini is running 4.3. I don't recall getting an update notice for going to 4.3, and I would like to have the command-K so I can insert links in my messages readily like I do at w