IPOD 60GB BRAND NEW TURNED TO 16GB...need explanation please

I got a 60 gb Ipod brand new from its box.
Connected to itunes: no problem.... but it appears that 39.7 GB are already used and 16Gb are free.
tHERE IS NO SONG ON IT, NO PHOTOS, NOTHING ON THE CALENDAR, NOTE....
What is wrong? I really don't know how to get out of this
Thank you for support

Yeah you are supposed to have software 1.2 i believe yours should come with that since it is brand new. I see you are runnung windows so you know hit start->all programs->iPod->iPod updater 6/26/2005, run it connect your iPod then hit restore i hope this helps

Similar Messages

  • Crystal 2008 - New Page Setup options - need explanation please

    I have been unable to locate documentation on the new Page Setup screen for Crystal 2008.  I am specifically looking on detailed documentation about the following check boxes:
    Printer Options:
         No Printer
    Page Options section:
         Dissociate Formatting Page Size and Printer Paper Size
    Margins section:
         Adjust Automatically.
    Can someone please detail for me these options.  I'd like to know why I would use them and how do they work when combinations of them are selected.  I am most interested in the second option (above), but would like explanations about all of them.
    Thank you.

    I do not think the No Printer option is valid for us as our reports are not web based.
    Does the Adjust Automatically apply to the reports as they are run from a runtime client?  or does this just adjust for design mode?
    This is why I am asking about the 'Dissociate Formatting Page Size and Printer Paper Size'.  It sounds like this is the setting we may want to check when creating our reports before we distribute to runtime clients.
    Here is why I want to know.
    We develop our reports to fit 8.5 inch x 11 inch paper.  We distribute our reports to our clients along with the runtime merge modules.  We have a VB.Net 2005 program that our non-vb.net software application executes in order to print the reports (using the Crystal for .NET methods, etc.) from our software application.
    Some of our clients are in Europe.  They use A4 paper.  We have re-designed some of our reports so the fields will fit within both paper sizes (8.5x11 and A4).  However, we have over 500 reports we distribute, so we have not modified all reports.  Therefore, prior to Crystal XI, we recommended to our runtime users that if the data on the report did not fit on the A4 paper (it was truncated), then they need to go into the printer properties (from the printer dialog box...these are users running the report, not developers) and change the report from portrait to landscape before they print.  This would print the report landscape with data across 8.5", and then white space on the right/remainder of the page, but all the data would print, nothing truncated.  After we installed Crystal XI, using this option of selecting landscape at print time, no longer worked.  The report would print with the orientation in which it was created (in our case portrait) regardless of what the user selected from printer properties. 
    This is why I am asking about the 'Dissociate Formatting Page Size and Printer Paper Size'.  Can someone at SAP elaborate on this please?

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • My ipod is brand-new and I mistakenly pressed the "restore" option! How can I put everything back to normal now?

    My ipod is brand-new and I mistakenly pressed the "restore" option! How can I put everything back to normal now?
    And after that, could you explain to me how can I put songs in it?

    Re-sync your apps and content from iTunes on your computer or redownload it from the iTunes Store, then restore from your backup:
    http://support.apple.com/kb/ht1766
    That should put back most if not all of your settings and data. As to putting songs on, either purchase them from the iTunes Store or, again, sync them from iTunes:
    http://www.apple.com/support/ipodtouch/syncing/
    You might find it worthwhile to read the User's Guide:
    http://manuals.info.apple.com/en_US/ipod_touch_user_guide.pdf
    Regards.

  • I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

    I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

    iTunes:
    AppName: itunes.exe          
    AppVer: 10.5.0.142          
    ModName: unknown
    ModVer: 0.0.0.0   
    Offset: 001be6f6
    Quicktime:
    EventType : BEX   
    P1 : QuickTimePlayer.exe   
    P2 : 7.71.80.42   
    P3 : 4ea5c6ef   
    P4 : QuickTimePlayer.dll   
    P5 : 7.71.80.42   
    P6 : 4ea5c6d5
    P7 : 00005b6d   
    P8 : c0000409   
    P9 : 00000000
    That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • 1 iPod Touch, 1 iPod Nano (Brand New) & 2 iPod Classics Not Reconized

    Hi,
    I have 1 iPod Touch, 2 iPod Classic & 1 iPod Nano (brand new one)
    Since the iTunes V9 update none of them will show up in Windows or iTunes.
    I have tryed the 5 R's, wiping everything off the computer and reinstalling it, reinstalling iTunes and more!
    Still nothing
    Have any of you had the same problem and managed to solve it ??
    Thanks in advance

    Sorry, I followed both guides and uninstalled everything - rebooted, reinstalled iTunes like your second link instructions said.
    PC sees all devices fine in Windows Explorer (and makes the pling sound when I connect them, they just do not show up in iTunes.
    (ipod nano, ipod touch 32GB, iphone 1st gen, ipad 1st gen)
    Manually starting or restarting all itunes/ipod related services doesn't do a thing either, nothing will sync.
    I'm at a loss.

  • Brand new iPad 2 16GB screen keeps turning black while I try to set it up.

    It is fully charged yet when I'm trying to set it up, I'll get through the first couple of steps then the screen goes black and it shuts down. I literally opened it from its sealed box less than 4 hours ago.

    Try rebooting your iPad.  Press and hold BOTH the power and home buttons at the SAME time for about 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
    If after this, your iPad still exhibits issues, I'd make an appointment at the Genius Bar of your local Apple Store.  Have then check it out.  If they determine it is deffective, get a refund, not an exchange.  The reason is they could give you a refurbished iPad as opposed to a brand new one.  Once you get the refund, buy a brand new one and chances are you won't have any issues.

  • My iPod touch 4th gen iOS5.1.1 can't be recognised by my computer and I have tried different cables and usb ports but nothing has worked. The iPod is brand new and was only opened today. Any ideas on how to fix this?

    I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables.  There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?

    Since this is an XP machine, which version of iTunes do you have installed?  Is it the latest version?
    Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
    If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad.

  • My iPod 4 brand new charger won't show the charging sign and won't connect to a computer. I have went to the Apple Store and bought the charger but it still won't work. What do I do?

    I recently got a brand new charger from my local Apple Store. When I got home and plugged it into my charger on my computer nothing happened. It chargesbut it doesn't show the charging sign or make the sound that says its charging. It takes my iPod touch at least 4-5 hours to fully charge. I would just like some tips on what to do. I have tried resetting my iPod and I've tried just getting a new charger, but nothing works. If anyone knows anything that might help I will very much appreciate it. Thank you

    Not Charge
    - See:     
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Brand New 2007 24'' IMac need some opinions please

    Hi,
    I have a 24' I Mac that is a 2007,,,, it was only used for 1 month then put into storage do to a move,,,, I just got it out of storage and set back up again. It only has 1MB of Ram, and I would like to possibly get it upgraded to the 3MB, anyone know how much this would cost, and if it is worth it to do ??? Also what other suggestions for upgrades that can be done to this system to bring it more up to date. This computer is just about brand new. like I said was used for approx 3 weeks and thats it. I read MB or is it GB of Ram is the most this system will take, id this true or can I get more ???
          Thank You
          MWA1024

    A 4GB kit will cost you just under $60
    see > OWC Apple iMac Memory Upgrades
    or > Computer memory upgrades for Apple iMac at Crucial.com
    Plus you could/should upgrade to Snow Leopard. Problem is Apple no longer sell Snow Leopard thru the Apple Store, so you will need to call Apple Support and ask for a 10.6 Upgrade DVD.

  • Brand new at copying DVDs - need help.

    Hope that I am in the right forum. I'm brand new at using DVD copying since I've only had this computer for about a week. I've had problems in copying my home video DVDs on DVD+R discs which were created on a Sony DVD recorder. These are obviously not copy protected. I tried making a copy for a friend but ran into problems, phoned Apple and followed their instructions for copying and burning -R discs but that didn't work for me. On my follow up call, they suggested that the problem may be either the +R disc (rather than -R) or the fact that the discs were not burned on a computer but rather on the recorder. They suggested the use of other software. So I searched the web andI downloaded something called Mac the Ripper and using the dialog box in that program, do have the contents of one disc on my hard drive as far as I know. But I don't know how to copy (burn) onto a blank disc either using this same program or something else. In other words, what are my next step by step instructions to burn what I hope I have on the hard drive onto a blank disc - I still have +R discs left so I'll likely be using them. Thanks for any help.

    From all the helpful information posted here, I have found out that copying DVDs is not quite as straightforward as I had hoped it would be using my new computer. I would have to purchase software which isn't supplied on my iMac such as Toast or Popcorn to do the job as far as I have found out from a number of sources. Toast is a bit more costly than I want to spend for just this one task although Popcorn is more reasonable. I am beginning to think that for the few DVDs that I really need to copy for my friend, the easiest route is to use my DVD recorder, transfer the contents of the DVD to the hard drive on my recorder (yes, the recorder does have a 160 GB HD) and then burn a blank DVD from the recorder's hard drive which is what I have done dozens of times in the past. Of course, it takes 2 hours to transfer the video from a DVD (assuming it has 2 hours of video on it) to the hard drive and then only about 4 - 7 minutes to burn the video onto a blank DVD from the HD of the recorder. Using the computer, I had hoped to reduce the time it takes for that first 2 hour step with the recorder. I'm not even sure if Popcorn would significantly reduce the time for transferring the video from the DVD onto the computer. I'll have to evaluate whether or not the cost of something like Popcorn is really worthwhile for me. Thank goodness, copying audio CDs is much more straightforward on the computer. Thanks for all the help.

  • Brand new to Mac.  Need to transfer my Itunes library from my PC to my Mac

    I am brand new to the Mac world and very happy to be a part after my long trip with PC. I just recieved my new macbook pro and I am trying to find the best way to transfer my music library from my PC to my Mac. I also just purchased a new Itouch as well. I have not done anything with it yet and I was thinking it would be better to wait until I get my library situated with the macbook to do so?
    Any help or advice would be a great help... I am completely lost. Everything that I have seen so far is more approachable to the point where it throws you off kilter!
    Cheers!
    Matt

    Read this article - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
    MJ

  • Error code 1013 after updating a brand new iPad 3G 16GB

    Hi all,
    I've got my new iPad today and over excited I've attached it to iTunes (v 10.1). It asked me to upgrade to the new OS and I did. After that it gave an error and told me that I had to recover. Now i'm trying to recover it all night and I still get the error message:
    The iPad couldn't be recovered. There has been an unknown error (1013).
    Has anybody seen this error before? And if so, what's the solution. It's a brand new iPad and I haven't got a clue what's wrong.
    Kind Regards,
    Rob

    Hi Graham,
    Yes that should explain it. I've found that article earlier today. The following doesn't solve it off course:
    +Error 23, 28, 29, 1002, 1011, 1012, 1013, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.+
    I have tried connecting on a different USB port, trying a different Windows laptop. I even went to my parents house to attach it to their Mac. Not solved yet. I'm a bit desperate. I've called the Apple Custumer Desk, but they couldn't help me either. They want me to sent my iPad to them and I will get it back in two weeks. But I'm not believing that it is a problem with the hardware...
    any ideas?

  • Brand new MacMini keeps dropping wifi signal please help

    Hi i have a brand new macmini which has been working perfectly fine untill today where safari seemed to be really slow sometimes not even loading searches, i checked if my wifi was connected but it changes from connected to searching for network.. My router cant be the problem because its in the same room and i have 6 other apple devices that work fine..ive searched all over for solutions and tried some but still no luck..does any one have an idea as to what i can do to resolve this annoying problem please?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • New hard drive issues - need help please!

    So I just installed a new hard drive on my Ideapad S10 and having the following issues.  I get a PXE-E61 : Media test failure check cable & PXE-M0F : Exiting  Broadcom PXE rom message.  I've uninstalled and reinstalled the drive to check the connection and still get the error, it's a brand new drive.  Also I noticed in the BIOS that the hard drive is showing up under ssd disk and SATA hdd shows - none.  If I restore the BIOS settings to original then the drive will show up under ssd but the SATA controller mode will show the AHCI setting instead of the Compatible setting it should use.
    I'm really stuck here and don't know what else to check.  My orginal drive is dead so I'm trying to get this working so I can install windows.  If anyone could help out it would be greatly appreciated - Thanks!

    Full Disclosure:  I don't know your machine.
    That PXE error probably doesn't indicate a problem - or not the problem, anyway.  Your machine boots, doesn't see an operating system on the hard drive (or doesn't see a hard drive at all) and tries to boot over the network and fails. That's what the PXE error is about.
    As to the SATA problems, what happens when you boot your Windows install media?  Does that see a hard drive?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for