Ipod 60gb uploads songs, but does not recognise them.

Hi
Ever since I upgraded to Itunes 5.01, I have been unable to upload songs from my library to my Ipod. Well, this is not strictly true, as Itunes and the Ipod go through the neccessary functions when I drag songs from the library to the Ipod, but once the Ipod is unplugged it doesnt recognise that the songs have been uploaded, and neither does Itunes.
Can anyone help me out?
Thanks.

hi thanks for you reply, tried changing the drive letter but made no difference.
as i said, everyting works fine, can play the transferred songs from the ipod when its still connected. disconnection however, deletes anything i have just put on.
I get an error message on itunes from time to time saying that iTunes is corrupt, but this happens every time even when I uninstall and re-install Itunes 5.01. It doesnt affect anything obvious, unless it's the source of not retaining the transferred songs to the ipod?

Similar Messages

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

I purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

Yes, I have a TLP license, so which kind of upgrade should I buy?
I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate!

When I connect my ipad or ipod to the computer, itunes does not show them as a "device".

When I connect my ipad or ipod to the computer, itunes does not show them as a "device", however my computer can see they are connected. so it seems to be a problem with itunes. i have tried re-installing itunes and it still doesnt work.
My Iphone does show as a device when connecteing wirelessly.
Its not a problem with the driver becasue the computer can see the devices, so its a problem in itunes.

Hello mimward,
It sounds like Windows can see your devices, but iTunes is not seeing them. I would use the troubleshooting in the following article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT2798 I have a Mac OS 10.6.8 server in my classroom that I have networked to each student's account. How do I create a folder that allows them to place their finished assignments in it, but does not allow them to go in and remove anything from that fold

I have a Mac OS 10.6.8 server in my classroom that I have networked to student accounts on the iMacs in the room. How do I create a folder that allows studnts to place their finished assignments in it, but does not allow them to go in and remove anything from that folder?

You want a "Drop Box" style folder. You should be able to achieve this by creating a folder and giving it permissions similar to the "Drop Box" folder in your users Public Folder (i.e. write only permissions.)

HT1347 I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3

I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3. iTunes sorts them by month/day/year. How can I fix that?

The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

My i phone 4 will send messages but does not receive them - why?

My i phone 4 will send messages but does not receive them - why is this?
e mail works both ways

Did you already check the general troubleshooting for messages here?
http://support.apple.com/kb/TS2755

Ipod Classic 160GB connects but does not sync to new itunes

I'm having a lot of trouble after installing the latest itunes. My iTunes picks up the ipod as a device but will not sync with it. I've tried to just sync it, ive shut down itunes and turned the ipod off and tried, i've ticked the box that says "convert higher bit rate songs to 128kps AAC" and tried to sync and unticked the box and tried as well. I have also tried going to File ->Devices->sync, and the sync button is shaded so i can't click on it. I have also reset it to factory settings and tried. I'm out of ideas, does anyone else have any?

Hello DeclanConky
Check out the article below to troubleshoot if it is software or hardware. Try starting up in Safe Mode or try it out in another user. Also when you removed iTunes, did you remove the other associated files Apple in the specific order indicated in the second article? Let me know if this works out or need to continue troubleshooting.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Regards,
-Norm G.

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

I reside in India bought 4s while on holiday to USA. Phone unlocked but does not recognise sim. Probably phone to be replaced. I cannot go to USA for this. How do I resolve this

I reside in chennai India. Bought iPhone 4s while on holiday to USA from best buy. On return to chennai I have got it unlocked. But the phone does not recognise the sim. Contacted local apple service. They say phone to be replaced. I cannot go to USA for this and courier charges are very high. What do I do? Can I get it replaced in India? If so where and how? I could have bought the phone in India itself I just wanted a souvenir from USA. Is this the quality check they do there. Pl help

diesel vdub wrote:
Best Buy does not sell unlocked iPhones.
Only the carrier to whom the device is locked can officially unlock it.
Getting the device unlocked anywhere else involves hacking/jailbreaking the device which voids the warranty and the user's right to support from these Apple forums.
Warranty and Support are only valid in the country of origin, in your case, the US.
Enjoy the paper weight.
I do believe your last sentence is deeply atrocious! You have no call to ridicule somebody who doesn't know these things. Sure, he has done something out of ignorance but, if ignorance is a crime and something to be a subject of ridicule, then God help us all!

Clicking update opens apps, but does not update them

When I click "update" in the app store, the app that should update opens, but does not update.
DEVICE: I am using an ipad mini with iOS 7.0.6 and 5.6 GB of storage available. I don't have any kind of app manager apps or anything like that.
THINGS I HAVE TRIED:
rebooting
closing all apps and rebooting
signing out of app store, closing all apps, rebooting, and signing back in to app store
deleting apps to create more space
changed app store settings to update automatically

Here's a link to a thread that solved the problem for me:
http://discussions.apple.com/thread.jspa?messageID=12552345&#12552345
The culprit was that the Flash plugin needed updating for FF. That was it.
Go to Firefox; Preferences; General (tab); Add-ons; Manage Add-ons; Plugins.
I clicked on Find Updates and immediately updated the Flash plugin.
Hope this helps others.

IPOD appears in Windows but does not Appear in ITunes

O.K. Forum Gang here's goes nothing.....brand spankin' new 5thG IPOD and I can not get it to interface with ITunes. IPOD remains in "do not disconnect" mode when connected to computer via usb - itunes does not launch.
When I open ITunes this message appears "The software required for communicating with the IPod is not installed correctly. Please Reinstall ITunes." I have now reinstalled ITunes upwards of ten times and the problem still persists. I have done everything Apple asks in accordance with Apple Support document 93716 (same title as my subject line). Deleted ITunes, QuickTime, emptied Temp Files, Restated computer ad nausema...etc.
My guess, albeit an uneducated one when it comes to these problems, is that something is amiss within Windows??
If someone can step up to the plate and provide me the solution to my problem I will be overjoyed!!!
Dimension 4600 Windows XP

Problem solved Hallelujah!!
Send your checks to MarkinMadison!! Here's his post:
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"

ITunes shows mp3 Files in library but does not play them?

Hi,
I am having trouble with my library. I have a number of tracks in my iTunes folder which show up in my library, however when I click on them, nothing at all happens. The Diamond does not move and the track does not play.
This is odd, as other tracks on the album, and which are included in the album folder do play, but iTunes has decided it won't play some of the tracks.
Interestingly, the tracks it does play all show up with the album artwork if I view the folder, however the ones it does not play only show up with the MP3 file icon. And just to throw another twist in, I can play the files which iTunes wont play, in cover flow...
So how do I gt iTunes to play all the songs again? Will rebuilding my library work?
And finally, iTunes has categorised a load of album files in an "unknown" folder, despite these files having full artist, album, genre etc information in their tag. Can I get iTunes to put these into the correct albums somehow?
Many thanks!

As for the files not playing, you might want to check their permissions. Select the mp3 files in your finder, go to File>Get Info, look under Sharing & Permissions, and make sure you have Read & Write
privileges.

I have just purchased a Nikon D7000 and iPhoto downloads jpgs but does not show them. It shows an empty frame. If you double click the frame it will show the image. I have tried importing images from the Nikon provided software and the same thing happens.

I just purchased a Nikon D7000. However, iPhoto does not display JPEG images. I seems to download ok, but displays only an empty box. Double clicking on the box opens the image in a single display window. It does the same thing when importing from Nikon's supplied software. Forget about handling RAW files. Now, I'm having difficulty importing JPGs from Photoshop files for slide shows or use in iMovie.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

PDF shows multiply-transparent jpgs, but does not print them

Hi all, i have to print some store vouchers with different logos, but too bad some of them are jpgs. I've set them to "multiply" with 60% opacity, and when I export to PDF, it actually shows pages as it should, but when I print them, these logos magically don't appear. What the heck am I failing? Attached screens of my working profile. Thanks!

While I think your boss is making a big mistake and sacrificing quality in the output, he is the boss. Make a new PDF preset -- start with X-1a, then change the standard to None and check the box to simulate overprint. Does that work? Do you see thin white lines (stitching) around transparent areas? That's a major problem on screen and with digital printing from flattened PDFs.

Ipod 60gb uploads songs, but does not recognise them.

Similar Messages

Maybe you are looking for