Ipod 6Gen with usb 1.1/1.0

will a 6 gen classic work (charge and transfer) throuhg a usb 1.1/1.0 port
even if its slower

You may experience problems if you try to send too much data in a single transfer. Avoid using automatic synchronization.
(33928)

Similar Messages

Ipod works with USB 1.1, but not USB 2.0 (30GIG)

Has anyone had this issue? I plug my 30GIG iPod into a USB 2.0, and it says updating, do not disconnect for what seems like an eternity. Eventually, it pops up saying the ipod appears to be corrupted, restore to factory settings? I respond ok, and then it fails to restore. Tried multiple USB 2.0's, same thing.
Next, I pluged into my USB 1.1, and it pops up itunes (latest version) almost immediately, and shows the ipod, and allows me to xfer tunes immediately.
Any thoughts?
Thanks

I'm having a similar problem. I've tried reinstalling USB2.0 drivers, iTunes, iPod but cannot get it to work. It just shows up in the device manager as 'USB Mass storage device' with an exclaimation mark next to it. I've tried to update the drivers for the 'USB MAss storage device', however it just says that I've already got the most updated drivers for the device. I've succumbed to the 1.1 for now, but would really appreciate it if someone could shed some light on this situation!

IPod works with USB 1.0 but not 2.0?

I'm trying to get my cousins iPod Shuffle working for her but I'm not having much luck...
When I plug it in to any port on the computer, I get "USB Device Not Recognized" and it shows up as an "Unknown Device" in Device Manager.
However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes.
What do I need to do to get this to work with USB 2.0? What could be causing the problem? Thanks!

No, the fact that they haven't needed to update the drivers means they work perfectly well.
If they work perfectly well, how come they cannot pick up the iPod (which has nothing to do with iTunes)?
Also, how do you know they haven't needed to?
More likely they simply haven't even looked at them to see if they need updating.
Oh, and from the first post...
"However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes."
But enough of this.
Good luck with your problem.
Hope you get it fixed.

New iPod working with USB 1.0

So I heard that the new Video iPods are USB 2.0. First question, why the **** is apple going away with firewire? Second how does the new 4th generation work with USB 1.0 on an FP iMac? I am sure it is slow but will it work? Still a bit frusterated they arn't firewire....
Thanks for the help.

why the ** is apple going away with firewire?
They haven't said. Perhaps to save space on the iPod.
From everything I've read it seems to be exactly that, as if you compare the dimensions of a FireWire chip to that of a USB chip, the size differences are in general rather great. In addition, although I cannot vouch for this myself, I've read in multiple places that FireWire chips are more expensive to manufacture, therefore this could be yet another reason. Not to mention the obvious one that the majority of iPods users have Windows machines, very few of which are equipped with FireWire. It is kind of a shame that Apple is straying away from FireWire given that in multiple computers that I've tested, syncing via FireWire has proven faster (using my old 4G iPod though of course) however the speed differences are pretty marginal. Finally, the thinness and price of the new iPods truly are amazing given both the 'competition' and previous generation iPods, so it seems to be a fair enough tradeoff.
Happy Holidays to all!!!
Mervyn

Ipod cable with USB & IEEE

I buy a ipod cable with together the 1394 & usb connect together, so is this mean it can use 1394 to transfer data to ipod?
thk a lot
The url show the cable that i buy.
http://hk.f2.page.auctions.yahoo.com/hk/auction/b3890652

so is this mean it can use 1394 to transfer data to ipod?
No, you cannot.
You can only transfer data using USB. There is no Firewire controller in the 5th Gen iPod, so even if you have the right cable, data transfer will still be impossible.
That cable can be used to charge the iPod via Firewire, but that's about all it can do with the firewire side of it.

IPOD frozen with USB symbol

My IPod Touch was updating on ITunes, when my laptop crashed. Now it won't restore or do anything and just shows the power lead with a USB plug in symbol and the itunes logo. Can anyone help, we've tried everything

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean. When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod 3g works with usb, not through firewire

Hello everybody.
That's a long time the problem happened, but now it gives me a big trouble because I can't change music on my iPod 3G 10go.
In fact, iPod was recognized through firewire by my iMac G3 until I installed Tiger. But charging is OK. After having installed that great OS, I can interract with iPod only through USB. That's a big problem because there's only USB 1 on iMac G3.
I've restored iPod, reinstalled it, having too repaired my iMac G3 disk with Disk Utility. But it still doesn't work.
So here's a resumee of all things I've done :
-Reinstalled iPod softwae (last version available)
-It does not work with my new iMac Core2duo, so that's not a problem with one of my two computers.
-That shouldn't be a problem with firewire cable because charging is OK.
-That shouldn't be a problem with dock connector because it works fine when I use iPod on Universal Dock with Apple Remote.

Hi Xavier
Yes many people seem to be having this problem since installing the new iTunes 7 and ipod software 2.3, however no one seems to know what is the real cause. My 3G iPod was perfect for years, and since last week I have been unable to connect to my Macbook Pro with firewire. However it is fine with USB.
People keep telling me to restore my ipod to an older software version (older than 2.3), however the 3G ipod is unable to restore using USB, and requests the firewire connection to restore.
Thus, I connected with USB and restored using iTunes on windows (using bootcamp on my MBP). However now my ipod is Windows formatted, and is having problems importing music in OS X.
Just wanted to let you know that others are having this problem, and we are waiting for Apple to issue a response/fix/update.

Is Ipod photo compatible with USB 1.1?

Can Ipod photo be used on older style PC with usb 1.1? I notice on the requirements for Ipod photo that you need USB 2.0.

Hello James, welcome to discussions.
You can use USB 1.1... but it will be rather slow to transfer files.
What type of computer do you own? I would recommend that you install a Firewire card if you can, and use that.
The Adaptec Fireconnect 4300 card would only run about $40 and it would work great with your iPod.

4th Gen iPod only works with usb - freezes with firewire

After a recent iTunes upgrade my my 40 gig Gen 4 iPod started locking up and freezing my G4 and G5 when using firewire to transfer files until I unplugged the iPod.
I found several threads from people with similar problems and tried all the suggestions (with the exception of "dropping" the iPod.)
After a week of troubleshooting, I'm finally successfully transferring files using USB 1 - it also freezes with USB 2.
This is the troubleshooting process I went through to arrive at the above conclusion:
First did the 5Rs.
Deleted and reinstalled iTunes
Followed Mitch's suggestion for using Disk Tools to reformat the iPod (successfully)
Ran some of the internal iPode diagnostic test and they indicate no problem with the drive or USB or firewire.
Ruled out iTunes as the problem because I was having the same problem when I closed iTunes and just copied files directly from the desktop to the iPod. When doing the transfers in the Finder, the Finder would freeze/lock up and I'd have to reboot.
Rules out the computer because the same thing happened with both G4 & G5.
Ruled out something in the user profile because the same thing happened when using my wife's account.
Ruled out the firewire cables because the same thing happened with two different firewire cables.
I've seen several posts from people with similar problems but no solutions. Has anyone cracked this nut? It takes FOREVER to update 40 gig with USB
Dual Processor G4 & G5 Mac OS X (10.4.6) 40 Gig 4th Gen iPod
Dual Processor G4 & G5 Mac OS X (10.4.6)

It looks like the answer to my problems was a bad hard drive. Sent it to the ipod doctor and after a $159 repair, I'm back in business http://nycipoddoctor.com/

IPod Mini Compatibility with USB 1.1 (Please help!)

Hello. I'm turning 21 in a few days and am away at college... my parents, while divorced, decided to join forces to buy me a really nice gift for my 21st birthday... a brand new iPod Mini. My mom attempted to get me a Nano, she tells me, but they were out and the salesperson said this one actually held more music for about the same price, so she did the right thing in my opinion.
Anyway, I for whatever reason instantly had the worry that this iPod won't work with my computer. I don't have a lot of money so when I was a freshman in college I purchased a Dell for $500 which is still my computer right now. It has a USB 1.1 port. I run iTunes already as my music browser so I'm not worried about the program not working... I am simply concerned that when I receive the gift in the coming days that I won't be able to use it with my computer because of the older USB port. I've read stuff on the net that says that USB 1.1 WILL work, others have said it won't.
So does anyone have a sraight answer? Will my iPod Nano be usable using my circa 2002 Dell Dimension Desktop with USB 1.1? Anything on this would be greatly appreciated. I hope it works... my parents don't exactly have $250 to throw around for something I can't use.
Thank you so much for reading, hope to hear from some of you soon! -Colin Moriarty

Welcome to Apple Discussions.
I would say USB 1.1 should work, but there is no absolute guarantee it will. The iPod nano should also work with USB 1.1, but again there is no absolute guarantee. If it works, the transfer speed will be slow but I believe you are prepared for this.
Stop worrying, Colin, for the time being. If you have any problems with your new gift, post back and we will try to help.
Meanwhile, I use my 2 iPod minis with Firewire, and both work perfectly. So if you have problems in the future you may consider switching to Firewire (by getting a Firewire PCI card and a Firewire iPod cable).

Help. about the ipod nano charged with usb 1.1

i just got the ipod nano. now i am charging it. according to the mannul, it will take 3hr to charge it by usb 2.0.
considering i only have usb 1.1, so my question is how long it wil take to charge the nano. until i wait for 6hr and the screen still shows do not disconnect. i can transfer the music and image to the nano. thanks.

Sorry, I'm not really sure how long the charge will take with USB 1.1, but I'd guess it would be way longer that "twice as long".
The "do not disconnect" will show as the display until you eject the iPod thru iTunes.
Now here the tricky part since I don't have a 1.1 USB. If you eject it thru iTunes, I believe the screen will show if it is still charging or "charged". So when you know you need to charge it, plug in to the `puter, then eject and leave it connected, to see what happens.
I do recommend getting the USB power adapter. For USD30.00, it is really worth it. Well, for me at least. I charge regularly (4 times a week) and only plug into my computer to add more music (maybe once a month). Your usage may be different, but it is so easy to come home and just plug it into the dock (plugged into the wall).

IPod Touch works with USB 1.0, why not iPad

I just received an iPad as a gift but I have an old 17" iMac with USB 1.0 and it's not syncing with iTunes to setup. My iPod Touch syncs perfectly with 1.0, so why not the iPad? If it won't work, i guess I'll return the iPad and get credit towards a new iMac.

Read the system requirements for the iPad to see if your machines have the correct OS and iTunes version.
http://www.apple.com/ipad/specs/

HT1349 my IPOD touch won't be recognized by my DELL Latitude PC and it won't synch. I'm technologically handicapped but all I know is it used to synch whenever I would attach it to computer with USB. Aside from tossing my DELL can anyone help?

My IPOD Touch isn't being recognized by my PC(DELL LatitudeD630) and it won't synch. I'm "technologically handicapped" but all I know is it used to synch whenever I would attach it to PC with USB cable. Aside from tossing my DELL can anyone offer suggestions that might solve this problem ? Thanks

I had this issue, I fixed it by going to:
Start > Control Panel > Devices and Printers
Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes.

Ipod 6Gen with usb 1.1/1.0

Similar Messages

Maybe you are looking for