Ipod 6th gen. nano attach to itunes generated error and it is in switch off when update its software with itunes.

I have ipod 6th generation. when i update software in itunes it is switch off and do not response in itunes. It is not switch on and when i attach to computer itunes shows this error "An Ipod has been detected, but it could not be identified properly. Please disconnect and reconnect the ipod. then try again. An unknon error occurred (2005)". Please help me on this probleam.

are you sure, that your iPod is 3rd generation? http://support.apple.com/kb/ht1353
For a second generation iPod, 4.2.1 is the latest possible version.

Similar Messages

  • Issues with syncing 2 IPOD 6th Gen Nano's to one computer

    we have 2 new IPOD 6th Gen.  I can sync mine in ITunes, but when I plug in the 2nd one (which has a different owners name) to sync, the device comes up, but when I hit the sync button nothing is happening.  Does anyone have any ideas? Thanks

    Do you have any better luck with that if you update to iTunes 10.6.1.7?
    From the notes for the release:
    iTunes 10.6.1 provides a number of improvements, including:
    • Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
    • Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
    • Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
    • Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
    http://www.apple.com/itunes/download/

  • My ipod 6th gen wont sync new songs ive uploaded and when i try to update it i get error message 1436

    my ipod 6th gen wont sync new uploaded music and when try to update version 1.2 it comes up with error message 1436

    Did you already have a look at this article? iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439

  • TS3218 my 6th gen nano plays the same song over and over even though the repeat is off. can anyone help me with this problem?

    my 6th generation nano plays the same song over and over even though the repeat is not on.

    It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

  • Why does my 5th gen airport extreme go on the fritz and disconnect all 2.4GHz devices when one device connects with 5GHz? I've done some research and it seems other people have had this problem too? I'm very frustrated and want my money back

    Running an apple tv 3rd gen, iPod 4th gen, iPhone 4s, windows vista laptop, and Xbox 360 with media center. 2.4GHz devices work great when apple TV is connected with ethernet, but as soon as I switch the apple tv to wireless, the 5th gen AEBS kicks over to 5GHz, my 2.4GHz devices lose connection and I can't reconnect my 2.4GHz devices, until I do a hard reset of my AEBS and reconfig the network with my iPhone, if I use the airport application for PC, my wireless devices still won't connect. I bought this router 20 days ago so I could run dual band wireless, if I wanted to limit all my stuff to 2.4ghz, I would've got a g router and saved some money. This thing supposedly has 3 antennas, one for 2.4, one for 5, and one for the guest network, so why do I loose my 2.4 when it "switches" to 5GHZ if it's supposedly always broadcasting both freq's????????

    I had a problem with dual bands running almost everything you have there. When I'd have a iPad and MacBook running, I'd turn on my 360 and I'd loose all connections though. Until a hard reset and the same cycle. I returned my airport a day later for a new one. No problems since. I had a faulty one. Not saying yours is, but mine was. I troubleshooted everything from options, manual setup, everythinggggggggg. It was a wasted 7plus hours to find out it was faulty. I have a pc, MacBook, apple tv, 360, and 2 iPads using it now flawless.

  • Windows 7 does not recognize ipod 6th gen nano

    Windows 7 does not recognize my device so I can't sync to iTunes. I tried running MSCONFIG, reinstalling iTunes and various different cables, usb ports. Any other suggestions?

    Does the iPod appear in Device Manager when it is connected?
    To access device manager, click Start and then right->click on Computer and choose Manage.
    It might be listed as unknown or under the USB host controllers section.
    B-rock

  • My ipod (6th gen nano) is not being recognized

    I was moving some music on to it, decided to update itunes, and the moment it updated my ipod stopped being recognized. I've uninstalled and reinstalled itunes, restarted the ipod, and restarted the computer- all, multiple times. Thoroughly unimpressed and not sure how to get this working. Please help?

    Hi, SFletches.  
    Thank you for visiting Apple Support Communities. 
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed > Windows Vista, Windows 7, or Windows 8.
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    http://support.apple.com/en-us/HT204095
    -Jason H.

  • Ipod 6th gen nano issue

    I have done the step by step procedure to try and have my computer recognize my new nano and it just wont work.  As soon as I start up my itunes my computer no longer recognizes the nano as a disk drive.  I dont know if its because it is 64 bit or what can anyone provide some help please.

    After I read this post I took a look at my nano (with which I am having volume level issues). I had it set to 'Rock'.
    Having now taken it off that EQ setting - i.e. changing it back to 'none' - the volume has been restored to a more acceptable level! AND, when I adjust the volume up or down on the nano using the buttons, it makes a beep - it wasn't doing that before...
    I think a firmware update is required!

  • I can't get my 6th gen nano to stop shuffling songs in a playlist.  I turned off "Shake to Shuffle", to no avail. Extra annoying when the playlist is an audio-book. Can anyone advise?

    Many of my playlists are audiobooks that I have borrowed from the library on CD and downloaded, not the ebook type. It is, of course, extremely annoying to have the tracks shuffled.  Is this something I am doing, or a problem with my nano?  I do have the latest version of iTunes.

    I finally exported my music to a DVD and moved it to another computer that I just bought. When I plugged in the Nano, I tried restoring the settings again. Even though I had just restored a few days before that and updated the Nano software on the other computer, it told me new software was available for the Nano! So it went thru the restore process and I loaded the music again. Same problem with the unwanted shuffling. When I checked some of the songs, shuffle was ON. I turned it off on a couple of songs, and now it's back to normal. No shuffling. Go figure.

  • Can't get my 6th gen nano touch out of voice control, and tips?

    I restored my ipod for some ******* reason and now i cant get the page over to change the voice control options, i need help!

    Read the PDF user manual for a possible solution:  iPod Manuals, search through Apple's Knowledge Base for support Articles and/or iPod Nano Support 

  • Ipod 6th gen not working

    Hi there, I bought an ipod 6th gen just over a year ago, while using it, I noticed the screen get grainy just before my battery went low.  Now the screen is black and wont charge.  I am wondering if it is the battery or the ipod itself.  I never dropped the ipod or abused it anyway, I dont really want to buy another one, if this is going to happen, has anyone else had this happen, or know what the problem is?

    jeffreyfromottawa wrote:
    ipod 6th gen nano frozen, reset not working, help steps on web site no help?
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • HT202183 My power button on 6th gen nano stopped working.

    hello everybody.
    the power button on my 6th gen nano stopped working. everything else is ok but won't switch on unless plugged in to power. then its fine.
    I think the power button is broken/stuck.
    Anybody else have this problem?
    If so how did you fix it/ how much did it cost to fix?

    Take the iPod Nano into an Apple Store.  After the folks there examine it, they will quote you an estimate.  Or you can call them and ask.

  • Ipodservice.exe has generated errors and will be closed by windows

    I just bought a brand new Ipod and got the new iTunes 7 but whenever I plug in the iPod I get the "Ipodservice.exe has generated errors and will be closed by windows" message and iTunes wont recognize the iPod. It seems to be recognized by windows. As soon as I restart the .exe it happens again (if the iPod is plugged in)

    Hi,
    I keep getting the same error message saying iPodService.exe has generated errors and will be closed by Windows. I have downloaded the latest version of iTunes and reinstalled and restarted my computer but still no go. Anyone got any ideas? Would really appreciate it as I've just got a new iPod nano and finding it very frustrating not being able to hook it up. Thanks in advance.
    Donie
      Windows 2000  

  • I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    Hey Stan1958,
    Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • 6th gen nano not recognized by win7, nor itunes

    i've been using my 6th gen nano for a few months now with no problems. suddenly today, i plugged it in and it wasn't recognized by windows and doesn't show up in itunes.
    i keep getting errors stating the unknown device is not recognized. i've uninstalled and reinstalled drivers in the Device Manager. i've tried everything on this support page: http://support.apple.com/kb/TS1538. i've also uninstalled, reset, and reinstalled itunes...twice. i've also reset the 6th gen nano several times by holding down the - volume button and sleep button.
    the weird thing is, when i plug in my 2nd gen shuffle, it's instantly recognized by win7 and itunes. same thing for my 1st gen nano (using the same cable and USB port).
    itunes 10.1.1.4

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

Maybe you are looking for

  • Weblogic 12.1.3 JDBC driver

    I migrated our application from 12.1.2 ADF to 12.1.3 and we have issues, a possible cause can be JDBC 4.1 , I want to use JDBC 4.0 driver for our datasource, I found ojdbc6.jar file in WLS 12.1.3 too, if this is JDBC 4.0 how can I use it ,if not and

  • Problem in executing BAPI

    Hi all I am executing the bapi BAPI_PO_CREATE. I have initialized the BAPI input fields and populated with necessary inputs. But when i execute the bapi, i get no output. Output should be available in Model node Return. But i get nothing. The bapi is

  • HT5312 how to find my security questions

    how do i find the answers to my security questions, i dont remember anymore...

  • Which tables does transaction CJR2 update.

    Hi guys, I just need to understand which databases/Tables are updated when I perform transaction CJR2 (Acitivty planning for WBS form sender cost center/Activity). I need to be able to see the complete record which shows the sender cost center, activ

  • PowerDVD (DVD movie player) won't install in my Mac Pro XP...

    Anyone tried installing PowerDVD for XP OS? I would get installation error, I tried ver 3, 4 and 5. Any DVD decoder that would work? Thanks.