Ipod 7th gen... recovery mode. what to do?

hello... pls someone help me.
I tried this morning to sync my ipod to the itunes because yesterday I purchased new albums at the istore. Then suddenly it showed that the ipod was in recovery mode. When i tried to restore it, after seconds it showed a message saying that the ipod could not be unmouted or something like this. Should I take the ipod to the store were i purshased it or what should i do?
Your comments w

You have to restore the iPod. That is the only way. Your iPod is sick.

Similar Messages

  • I cant turn on my ipod. i tried to Reset it by pressing the turn on button and home button but it didnt work. i connect to my computer and a prompt message said that my ipod is in recovery mode. what should i do?

    i think it all started when i dropped from 2meters high.
    When i connected it to my laptop, using itunes... my ipod's name turned into 'ipod'
    capacity : n/a
    software version: n/a
    serial number : n/a
    Help guys!

    Ouch! If it didn't break you are very lucky.
    Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • New ipod 7th Gen is corrupt - what should I do?!

    Brand new ipod. Updated itunes, running on windows 7. Doesn't even recognise it plugged in on my computer - never mind in itunes!! What can I do to solve it. It did briefly show a message about being corrupt but that has gone now : (

    Try it on a different computer.

  • I am a forensic examiner with an iPod 5G in Recovery Mode. As a 'non Apple' person, what does 'restore' imply with reference to the 5G? Does it affect any data on teh iPod, like pics, and videos?

    As stated in the title, I am a forensic examiner, although most of my work is on Windows devices. My problem is an iPod 5G with Touch Wheel that I received to exam, and I have not been able to get anything from conventional methods. But not really understanding enough about the Apple architecture and iPods, when I plug it into a computer, it appears to be in Recovery Mode, and calls for a Restore. The questions I have are:
    1) How does the iPod get into Recovery mode
    2) How to get it out of Recovery mode
    3) But more importantly, what does Restore do to the device? If there happen to be items of interest (pics, videos, etc), does the restore affect them?

    - You can place the iPod in recovery mode by:
    Recovery mode
    or by using this program (there are others too)
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Many internal errors in the iPod resul in the iPod going automaticlly (default) into recovery mode.
    - Usual method is to restore the iPod via iTunes to get the iPod our of recovery mode.
    iTunes: Backing up, updating, and restoring iOS software
    Sometime RecBoot will do it if the iPod was intentionally placed in recovery mode
    - Unless RecBoot or similar will get the iPod put of recovery mode the iPod will be erased. Restoring the iPod erases the iPod.
    - For more inbfo on recovery mode see:
    http://theiphonewiki.com/wiki/Recovery_Mode

  • I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

    I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

    http://support.apple.com/kb/TS3694#error3194
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My iPod went into recovery mode and I knew I had to restore it. However, when I plug it into the computer, nothing comes up on the iPod and my iTunes doesn't open. Except, when I plug my iPod into my wall charger, it lights up. What can I do to save it?

    For some reason, my iPod doesnt power up when I connect it to my computer, but it does if I plug it into my wall charger.
    I need to restore it as it went into recovery mode, what is it that doesn't allow it to connect to my computer and what can I do to fix it?

    You can re-download for free (As with the free music the bill just reads .00) .
    Try it with one and see for yourself.
    Oh yes, spare yourself future grief since this doesn't apply to music and video, get an external HD to back up iTunes and use it!

  • When i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    Hi tgoit2015,
    If you are having issues restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • What does it mean when your ipod is in recovery mode and how do I solve this problem

    What does it mean when your ipod is in recovery mode and how do I solve this problem?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • My ipod is in 'recovery mode' and I tried to fix it, the process wouldn't complete and my ipod isn't working at all??  What to do?

    My ipod is in 'recovery mode' and I've tried to recommended process to fix it but it won't complete the process.  In the meantime, my ipod Nano is not working with my Menu screen or music, what to do about this??

    Hi Newf51,
    Is this an iPod Touch that is stuck in recovery mode?  What happens when you try to restore it to factory settings through iTunes?  If it gives an error, go through this article to try to resolve the issue Resolve iOS update and restore errors - Apple Support

  • My ipod is in recovery mode and my itunes cannot connect to the server what do i do?

    my ipod is in recovery mode and my itunes cannot connect to the server what do i do?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • HT201210 i have a broken button and my ipod is in recovery mode i need help i dont no what to do

    i have a broken button and my ipod is in recovery mode i need help i dont no what to do

    What happens when you try to restore via iTunes?
    What button is broken?

  • HT1222 What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    . . . sparse bundle could not be accessed (error -1)

  • Hi. I have an ipod 7th Gen. Whenever i rate a song from ipod, when i connect my ipod to my pc i see that  another different song is rated on itunes. Can you help me with it? or what causes this problem?

    Hi. I have an ipod 7th Gen. Whenever i rate a song from ipod, when i connect my ipod to my pc i see that  another different song is rated on itunes. Can you help me with it? or what causes this problem?

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

  • TS1363 4th gen IPOD stuck in recovery mode?

    4th Gen IPod stuck in recovery mode, how do I reset or restore?

    Connect it to iTunes.  If iTunes doesn't see the iPod, try manually connecting the device to iTunes in recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • My ipod is getting stuck on startup and i cannot even access the recovery mode. what can i do to resolve this problem?

    Hi.
    My ipod touch 5 is getting stuck on startup and i cannot even access the recovery mode.
    what should i do to resolve this problem?

    Try what you missed here:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • 502 error in sending the request from F5 to SAP PORTAL

    Hi All, I face a problem in NW04S SP13 Level: I have  my Production and Development landscape where I get an HTTP Request from a Oblix Server and pass it to SAP ENTERPRISE PORTAL through F5. In my Development Landsacpe this request is process by SAP

  • Can I install 10.4.11 or above on my G4 Titanium 400 mhz with 512 megs ram?

    Hello, My wife and I are trying to determine if we can both find to purchase, and install 10.4.11 or above on our Titanium laptop. She has recently bought the Adobe Creative Suite CS 3 and it requires 10.4.11 or above. I'm pretty sure we can add more

  • What's the best way of analyzing WCF performance

    I have an issue in production WCF is very slow compared to WSE (Web services). Note: that issue is reproduced only in production and on the test servers everything goes fine. WCF is using basicHttpBinding. I read a lot about enabling tracing. But whe

  • TS1717 I am unable to update my Itunes app

    I am unable to update my Itunes app... I get a message that says "Service "apple Mobile Device failed to start. Verify that you have sufficient privleges to start system services"  What do I need to do to get it up and running? I've tried reinstallin

  • How to get the exact decimal places displayed while exporting to Excel?

    Hi All, I have a requirement to display the exact decimal place values in my report. In my pivot table, i duplicated a column named order number and converted to percentage by applying these conditions Show Data As-> Percent Of-> Column. I got a resu