Ipod 80gig gives an error when connecting to pc, and deletes all

hi,
i have an ipod 80gig since december and in the beginning when i connected it to my computer sometimes it blocked and i had to restore (all my music GONE!).
it bothered me but it didn't happen so often.
now allmost EVERYTIME when i connect my ipod to my computer, itunes gives an error saying there was an error, he can't read it and i have to click restore. when i unplug it then, all my songs are deleted off my ipod. and when i restore later it works like normal again... HELP ME!
i hate this because i allways have to put everything on my ipod again and it takes forever for all those songs to upload again.
all help is welcome! thanks!

Hi there,
It sounds like the video may need to be converted to sync properly. I would recommend taking a look at the article below for more information.
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/ts1497
-Griff W.   

Similar Messages

  • Ipod nano creates an error when connected and shuts itunes down

    When I connect my ipod to the pc using the USB lead it opens itunes up, shows it is connected and then creates an error which then closes down itunes. I have tried the reset and re install etc but the same thing happens. My brothers ipod which is the same has no problems. Can any one help please.

    Same thing happens to my daughter's. I've actually sent the iPod back to Apple for diagnosis - all good. I've uninstalled and reinstalled drivers - all good.
    Someone please help !!!!

  • IPod Touch 4th gen home button not always working and deletes all songs on iPod.

    I bought my ipod touch on may but since that day, the home button is not alway working and also sometimes when I sync my Ipod, it remove all the songs from it without asking me. What can I do? It is so frustrating..
    thanks in advance for help.

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Regarding the songs problem, Are you always syncing to one computer/iTunes library? If y sync to another computer/iTunes library your iPod will be erased and its contents replaced with what is in the iTunes library of the second computer.

  • I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    Not all car systems are compatible with the iPod touch.  Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

  • Error When connecting proxy

    Hi,
    When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
                System.setProperty("ProxySet", "true");
                SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
                proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
    URL u = new URL(url);
    URLConnection uu=u.openConnection(ScrapperInterface.proxy);
    try
                    URI uuu = uu.getURL().toURI();
                    List l=ProxySelector.getDefault().select(uuu);
                    for (Iterator iter = l.iterator(); iter.hasNext(); )
                         Proxy proxy = (Proxy) iter.next();
                         System.out.println("proxy hostname : " +proxy.type());
                         InetSocketAddress add = (InetSocketAddress)proxy.address();
                         if(add == null)
                             System.out.println("No Proxy");
                         else
                             System.out.println("proxy hostname : " +add.getHostName());
                             System.out.println("proxy port : " +add.getPort());
    catch (URISyntaxException ex)
                    Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
    }Output is:
    proxy hostname : DIRECT
    No Proxy

    Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
    System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
    SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
    proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
    URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
    URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
    List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
    InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
    What you should be doing here is using the URLConnection you have already created. Not testing an address.

  • IPod Classic 80 GB Freezes when connecting to Computer

    Hi.
    My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
    When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
    Pllllllease help me out her.

    Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
    1) Quit iTunes.
    2) Delete iTunes from your Applications folder.
    3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
    4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
    6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
    You should now be able to run iTunes 8.2.1 again.
    And your iTunes will restore to before you upgraded and you won't lose anything.
    *If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
    WhittWhitt

  • I keep getting this error when connecting my phone (0xE8000001)

    I keep getting this error when connecting my phone (0xE8000001) to iTunes. Sometimes the phone will try and sync for a little bit then it disconnects. What gives?
    And yes, I do have the latest version of iTunes (7.3)

    i kept getting all the same errors and i just figured it out. after getting an iphone i went from pure excitment to anger as i plugged it in and realized i needed to upgrade to tiger. then i spent over an hour installing tiger and it still didnt work. i got the same itunes error of not recognizing. HERE IS THE FIX....TURN OFF THE IPHONE AND REMOVE FROM THE DOCK. DONT JUST PUT IT TO SLEEP, HOLD DOWN THE BUTTON UNTIL IT ASKS YOU TO SLIDE TO TURN OFF. THEN CLOSE ITUNES. NEXT TURN THE PHONE BACK ON BY RE-DOCKING. START UP ITUNES IF IT DOESNT START IMMEDIATELY. YOU SHOULD START HAVING FUN NOW, ALBEIT SLOW ON THE 1.1 USB.

  • TS3694 My ipod gives code 3194 when trying to update and restore on my home computer.  My daughter's ipod doesn't have a problem.  We are doing family share, but I can't even apply free game aps because it says I need ios 4.1.  It hasn't worked.  What to

    My ipod gives code 3194 when trying to update and restore on my home computer.  My daughter's ipod doesn't have a problem.  We are doing family share, but I can't even apply free game aps because it says I need ios 4.1 and when I try to do that it hasn't worked.  What do I do?

    3194
    See the actions for that error here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

    Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
    -or-
    The icon in the dock bounces once, and nothing happens.

    Windows or Mac, and exactly which operating system version?

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

    For both
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features

    I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos".  How can I do that without losing some of the features of those two?   I just want to add a feature.  Thanks

    Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
    You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
    Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
    iTunes Store: Associating a device or computer to your Apple ID

  • Error when connecting to terminal

    Hello,
    I have a BB 8100, Desktop manager 4.6.
    Synchronization was working correctly 3-4 weeks ago.
    Today, when I tried to synchronize, I had this error message:
    0 x 80040fb3
    I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
    I tried several time to synchronize again but without success.
    Now, the situation is even worse!
    New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
    "Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
    I can not anymore try to synchronize!
    This is very strange, it never happened before.
    Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
    HELLLLP!
    Thanks
    Solved!
    Go to Solution.

    Hello RianaZaire,
    Unfortunately, I still have the same error Message.
    I have not been able to solve the situation.
    I reinstall twice the software.
    I tried to connect my Blackberry to my computer with a new cable.
    I still have the same error message.
    I don't know what to do.
    Maybe somebody will read our messages, and help us!
    Maybe this information has a link with my blackberry problem:
    I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
    Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
    For information, I also do synchronization of my adress book between my phone and TOMTOM.
    HELP HELP

  • Error when connecting to portal from some machines

    Hi all,
    Can anyone help me with this.
    I get this jserver error when connecting to portal from some
    client machines.
    I works fine from the others. Any ideas?
    This is the error I get:
    [08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
    label=73 url=http://odeceixe:81/pls/portal30/!
    PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
    [08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
    Unexpected Exception, name=content-fetcher5
    java.io.EOFException: Premature EOF encountered
         at HTTPClient.StreamDemultiplexor.read
    (StreamDemultiplexor.java, Compiled Code)
         at HTTPClient.RespInputStream.read(RespInputStream.java,
    Compiled Code)
         at java.io.InputStream.read(InputStream.java:95)
         at java.io.InputStreamReader.fill
    (InputStreamReader.java:163)
         at java.io.InputStreamReader.read
    (InputStreamReader.java:239)
         at oracle.webdb.page.ContentFetcher.run
    (ContentFetcher.java, Compiled Code)

    Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Maybe you are looking for