Ipod a vegetable!!!!

Hi
My 3g 15gb ipod refuses to mount. When it is plugged in, or has battery power, it shows the apple logo, then a folder icon with an !, and then resets. It does not matter if is on hold or not, and reseting it does not help, and will not mount. Thanks for any help!

"ipod a vegetable!!!!"
What kind?
Have you seen these?
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try to restore it in disk mode.
Putting iPod into disk mode.

Similar Messages

  • I can't restore my iPod!!  it's basically a vegetable!!

    yeah so last night, my iPod froze, so i restarted it... the apple logo came up like it always does when you restart it, but then it went away, and came back and just keeps turning off and on over and over again. the battery wore down so i plugged it in and the same thing keeps happening.. so i finally decided i was gonna restore it, so i tried, and then an error message came up that said 'the iPod cannot be restored because it contains files that are in use by another application.' i really don't know what to do at this point... somebody please help me out!
    cheers

    Have you enabled disk mode on it?
    Turn off all syncing if you can, then turn off disk mode if its on. Hit apply then try the restore again.
    A really drastic step it to erase it using disk utility.
    Then reopen iTunes and restore the iPod software from there.
    M.

  • IPod nano turned into a vegetable

    So, the story is quite simple - I've been a complete idiot. I have accidentally formatted my iPod nano (on a PC running Windows), and now, it does not show up in iTunes. It appears in the Finder (I'm running a mac now) as a removable drive. An empty one. Is there anything that I can possibly do?
    I've tried restarting it (holding down the center and the menu keys at the same time), did not work.

    iPod: How to determine your iPod's disk format
    Restoring iPod to factory settings
    iPod not recognized in iTunes and Mac desktop

  • My iPod Classic is no longer displaying my songs in alphabetical order.  How do I get it to organize the songs again?

    There is some kind of organization that it's using, but I don't know what that organization is.  It displays like fifty songs in alphabetical order (not songs by the same artist or on the same album or anything) but then when it gets to Z, the next fifty songs are shown organized in alphabetical order starting with A again.  So it looks kind of like this on my iPod songs list:  (using foods instead of songs)
    Apple
    Banana
    Carrot
    Donut
    Eggplant
    Fruit salad
    Granola
    Hot dog
    Ice cream
    Jerky
    Lemon
    Meatloaf
    Nutella
    Orange
    Pear
    Raisin
    S'mores
    Vegemite
    Watermelon
    Yogurt
    Angel food cake
    Bread
    Coconut
    Gravy
    Lime
    Oatmeal
    Peach
    Red velvet cake
    Sausage
    Turkey
    Vegetables
    Avocado
    Bacon
    etc.
    It's gotten very annoying, because it's incredibly difficult to find songs with no known organization.  I tried looking through the "Settings" menu but there was nothing I could find that would help me take care of this. 

    I got it to reorganize alphabetically by resetting the iPod, but then when I synced it again, it went back to the way it was before, and resetting it didn't work.  I tried resetting it while it was still plugged into the computer and that worked.  So for now, the problem is solved.  I'm just gonna post this so that if anyone else needs the solution to this, they can find this somewhat unreliable one, because I've been looking at other questions on this site and apparently nobody that asked a question about this has ever found a solution, so... yeah.  If anyone knows a more permanent solution to this problem, though, please, please please let me know!! 

  • Syncing 2 Ipods, please read

    Okay, I bought 2 Classic Nano 8 gig. I have Itunes setup on my CPU at home, & at work. The one at home is my wife's, the one at work mine.
    How do get the playlist I created off my Wife's Ipod onto my Ipod without deleting either of our entire libraies? It won't let me click & drag when her's is hooked upto my CPU. Please help, because I don't wanna try to download all that music 1. again, & 2. at work.
    This music is not purchased from I-tunes also. Thanks....Vegeta

    *Then come to work, & have my Ipod set on manual, & Sync & that playlist will go into my library*
    No it won't. You can use iTunes to transfer any songs on the iPod that were purchased from the iTunes Store. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iRepo Mac and Windows
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • List view in iCal on my iPod touch is corrupted

    The 'list view' seems to be all wonky in Calendar on my iPod touch.
    The dates for a given day that's displayed don't make sense:
    i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
    Also, the 'events' given for each day listed don't make sense and are often duplicated.
    The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
    Has anybody experienced this ? Very frustrating, since I like the list view.
    I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
    Any help greatly appreciated.
    ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....

    See this previous discussion:
    FIX for iPod Touch Home Button: Apple Support Communities

  • Multiple ipods belonging to multiple family members on one computer

    How do I keep my family's libraries separate on one computer. I have been checking and unchecking songs each time I sync one of my children's ipods. It is driving me nuts. There has got to be a better way. My husbands library alone so far is 1300 songs. HELP!

    When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
    a) Sharing a single iTunes library
    b) Creating Multiple Libraries in a single user account
    c) Creating multiple user accounts.
    Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
    Sharing a Library and/or User Account
    If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): iPod - Syncing Music
    Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
    Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Adding songs to iPod shuffle - Windows
    Multiple Libraries
    It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
    Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
    Separate User Accounts
    Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here:
    Using Windows XP User Accounts
    Create A New User Account In Vista

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

    If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
    You can try to blow it clean, if you have a can of compressed air or gas.
    Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    The Reset sequence may send a signal to the Car stereo to do the right thing

  • Ipod no longer sync purchased material?

    Hi there. I recieve this message after i connect my ipod.
    http://img.photobucket.com/albums/v128/chrisgee/Failed%20Shots%20Reference/Ipodp rob.jpg
    Nothing I have purchased will sync to my ipod for some reason. I bought them ages ago, they work fine in itunes on my computer, and up until recently they worked fine on my ipod also... I think it related to the fact that due to a fault with vista i was forced to 'reactivate' windows. But it was reactivated using the same key that came with the computer? weird
    Any help appreciated.
    Cheers
    Chris Gee
    www.stereoimage.co.nz
    Message was edited by: StereoImage

    Have you tried to de-authorize your computer, then to re-authorize again?
    Make sure to use that ID that had been used for purchasing those 52 tracks.

  • IPod no longer showing any music.. help?

    I was listening to some music on my iPod through my PC and I was using Winamp (I've used before and no problems) and when I unplugged my iPod all of my music had disappeared.
    The photos are still on there and the mp3 files seem to still be there - I just can't access them when they are not plugged into the computer. Literally all playlists, artists, albums and songs have disappeared.
    I have tried downloading programs to extract the music from my iPod and then start over as my music isn't in iTunes (it is a new PC), but it comes up with an error message that the iPod Control file is corrupt..?
    Has this happened to anyone else? Any suggestions on fixing it?
      Windows XP  

    Welcome to Apple Discussions!
    That file tells the iPod where everything is and what to look for.
    You may need to restore your iPod (keep reading though)...
    Restore iPod
    You may also be able to use the repair function of this program to get the iPod to recognize the songs on it...
    YamiPod
    Repair iPod (YamiPod)
    btabz

  • IPod is not recognized by Windows Vista - possible solution

    During the past couple of weeks that I faced this problem I found out that a lot of people had the same question as I did.
    Here is a possible solution.
    I have HP Pavilion laptop with Windows Vista. After I connected my new iPod – it didn’t show up in My Computer as a new device and in Device Manager it was listed in “Other devices” with a question mark next to it. I already had iTunes installed – it didn’t show up in iTunes. On the attempt to reinstall the driver I had a message that the driver was found but an error occurred while installing it.
    Here is what I did:
    1. Install iTunes (it has iPod driver for Vista in it).
    2. Turn on iPod and connect it to computer.
    3. Restart computer with iPod turned on and connected to computer.
    4. On the start up the computer will begin automatically installing the driver and the message will appear in the corner that new device is being installed.
    5. After it has been installed – check My Computer – you should see it listed there.
    6. Run iTunes and configure iPod.
    iTunes might run a little bit slow when configuring iPod for the first time.
    Good luck.

    if only this fix worked for windows xp or even 2000 (at my job)
    insane, but it IS a driver/usb problem i now know, at least i've gotten that far.

  • IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

    Hello,
    I have IPod 80GB which I rarely use. Yesterday  when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
    When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
    Later when I wanted to play, I noticed I had no audios in iPod at all.
    Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
    I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
    Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
    Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
    I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
    Thanks

    I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

  • Cannot sync, error message "could not be read" for an iPod no longer in use

    I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
      Windows XP  

    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
    Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Ipod not being being read by vista

    Hi Guys,
    I have an 8 gig nano which I got for Xmas in 2007.
    It has worked great (apart from the 4 sets of sennheiser and sony headphones ive been through), less errors than my old 4 gig had.
    But it has an error and I dont know how to fix it or why its happened so Im hoping someone can help.
    About a week ago I was transfering some mp3 files onto my ipod. I thought the transfer had gone smoothly, but when I unplugged my ipod and tried to listen to the songs in my recently added playlist, I was unable to select any most of the songs I had just added (and some I had added a week earlier). It wont let me select these songs either in the songs list or recently played list and skips to the next song. Then it wont let me skip back past that song!
    Also the ipod is no longer recognised by itunes. It simply doesnt pop up in the menu when I plug it in. Windows recognises an ipod has been plugged in, but when I try to explore the ipod it wont let me and tells me the device needs to be formatted.
    The exact error message when I try to access the ipod directly through vista reads:
    "You need to format the disk in drive E: before you can use it"
    The ipod is still usable and charges, but I cannot listen or skip back past the songs ive recently added, itunes wont recognise it and I cant add anymore songs because I cant access it through Itunes.
    I have tried:
    1. The manual reset by holding the centre and middle buttons down
    2. charging it completely
    3. trying different USB ports
    4. trying a different ipod cable.
    5. Uninstalling and reinstalling new itunes.
    Nothing Helps! Any suggestions? Im thinking Im going to have to do a format
    HEEEEEEEEEEEEELP MEEEEEEEEEEEEEEEE!
    Thanks,
    John

    You may need to change the drive letter of the ipod as describe [here|http://support.apple.com/kb/TS1493]
    If you can't see the ipod in disk management, before you connect the ipod, open itunes, select edit/preferences, with that open click on Show desktop. This will make itunes busy. Then connect the ipod.

Maybe you are looking for

  • Running GR55 reports for special periods

    When running GR55 reports, the selection field for "Period" only lists periods 1 to 12. We are using the standard K4 FI year variant. Can someone tell me how to get the 4 special periods displayed for selection? Thank you, Hakiza

  • Moved MS Office now Word won't open

    Bought a ibook G4 just to learn Mac. When I get familiar with Mac, I intend to covert completely from PC. My problem began when I added MS Word to the dock by dragging the icon. It worked fine the first time I opened it. Now it doesn't open. The erro

  • Selection from 3 tables

    Hi, I have select-options: s_matnr for mchb-matnr & s_pradh for mara-pradh & s_wdatu for lqua-wdatu. I want to select records from mchb(matnr,wekrs,lgort) , mara(matnr,pradh) and lqua(matnr,wdatu) can any one tell me how do i achieve this? points gua

  • Why does the message "the last backup could not be completed" appears every time i try to back up my touch?

    Hi, I'm trying to back up my itouch in icloud but every time I try to hit the button backup now a message that says "the last backup could not be completed" appears. I would like to know why does it appears and what can I do to fix it? I would be gra

  • I can't install Premiere, why??

    I did delete my premiere and also my adobe media encoder before. now I just paid for the creative cloud and for some reason I can't install them