IPod AC charger not compatible with iPhone?  Overheating!

I was charging my iPhone with an old AC adapter that uses the firewire cable from my iPod back when they shipped with them, and I don't know what was going on, but the iPhone became scorching hot to the touch. I checked the AC adapter specs, and they are definitely different than the iPhone AC adapter.
Does anyone know definitively whether or not old AC chargers are unsafe? Seems like there should be a warning or something. If this wasn't the cause of the heat, I need to figure out what else is wrong, because I can't imagine the temperature was within normal operating limits.

There isn't a version that will work with iOS previous to 5, according to this Apple article.
http://support.apple.com/kb/PH2578?viewlocale=en_US

Similar Messages

  • Find My iPhone not compatible with iPhone 4

    when  I try to buy find my iPhone, I get a message that says  "this app requires iOS 8.0 or later. you must update to iOS 8.0 in order to download and use this app."
    and is not compatible with iPhone 4.

    This explains how to solve this issue:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support

  • When i am trying to restore backup to my iphone, its coming up that back is not compatible with iphone. Please help me restore backup.

    Hi
    When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
    Thanks
    Mandy

    From the article that the question was posted from:
    Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Try reading the solutions you find in the future and follow them.

  • I have installed 0S5 but restoring the backup doesn't work. the following messages appear: An error accurred while restoring this iphone (-20)  because the backup was corrupt or not compatible with iphone being restored (my iphone 3GS)

    I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message:  because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc

    Hi Ckuan,
    Thanks a lot for your advice.    
    Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right? 
    This back up I made right before I restored my iphone.  During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem. 
    Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted?  If so, how do I downgrade the iphone?
    Thanks in advance.

  • Backup corrupt or not compatible with iphone

    Hi,
    whenever i try to Backup my iPhone (4S) either on my Mac or iCloud it says "backup corrupt or not compatible with iphone "
    i ve been trying different Solution given here
    1) Deleting Backup from Device Preferances ( it is already empty . i cant see anything der )
    2) trying to navigate Backup in Apllication Support > Mobile Sync ( But der is no such Folder der )
    Please guide me thru.

    MeCheleBrenee wrote:
    Hi...
    I'm trying to erase the restored backup on my MacBook Pro that was meant for my iPhone 5... I found out the software is corrupted and continued to affect my phone. Where do I find it And how do I erase it to start all over?
    On a Mac your backups are in /Users/<your username>/Library/Application Support/MobileSync/Backup
    (Open Finder, hold the Option key, and select "Library" from the Go menu to get to your user's Library folder.)
    In Windows, the fastest way to get to your backup folders is:
    - (Windows 7 and below) Start -> Run -> type %appdata% (with the percents) and press return.
    - (Windows 8) Search -> type %appdata% (with the percents) and press return.
    From Application Data, navigate to Apple Computer, Inc. -> MobileSync -> Backup.
    You can match your device identifier with the backup folder name by clicking on the Serial Number field in iTunes (which will switch it to your device identifier.) Delete (or rename, if you're worried about making a mistake) the folder with the matching identifier.
    I know this thread is about a corrupt backup blocking updating the backup process, but in case anyone is having a corrupt backup blocking a restore (a much scarier problem,) and you don't have the original device/data to make a new backup, I hope you'll take a look at the information I've been writing about fixing backups on my company's blog:
    http://deciphertools.com/blog/2014_07_11_itunes_could_not_restore_backup_corrupt /
    We have been looking at fixing the corrupted backups, which may be helpful for you!
    (Note: As I mentioned, I work for the company I'm linking to above, so I stand to benefit, either financially or otherwise, from the links I'm recommending.)

  • The message read on the computer is Because the back up was corrupt or not compatible with iphone. Delete the back up for this iphone then try again.

    Iphone 3gs won't back up in itune on the computer, but it will sync. the message read on the computer is because the back up was corrupt or not compatible with iphone. Delete the back up for this iphone then try again.

    Launch iTunes. Then from the menu bar at the top of your screen click iTunes / Preferences then select the Devices tab.
    Delete any iPhone backups.
    Quit then relaunch iTunes. Connect the iPhone to your computer and try syncing.
    More help here >  iTunes: "Backup could not be saved on the computer" alert message

  • Auvio fm transmitter/charger not compatible with iPhone4 suddenly??

    Ever since I updated to iOS5 my phone will not play music or charge with any of my accessories. The only way to charge my phone is with the USB cord that came with my phone... Very irritating since I've spent a bunch of money on these accessories. Is there anything I can do to make them work or is this another Apple issue I have to "wait" out??

    I have just been down this route.
    I had an old Belkin Tunecast II that I used with my Ipod Touch. When I got my 3GS, I thought I'd get an Iphone compatible one to compliment it and avoid the nag message telling me "this accessory is not compatible with the Iphone..blah blah..airplane mode...blah"
    Anyway, with the old Tunecast, you just slotted the Ipod Touch in place and there were several interchangeable supporting cradles...easy.
    The new Belkin is a pain and requires you not only to slot the Iphone into the cradle, but also insert a lead into the headset jack!! What a backwards step!
    The Griffin was fine for a day..then stopped working! The Ipod was playing, but nothing was being transmitted to the stereo.
    So, I've gone back to the old Tunecast! I've removed the cradle and my Iphone sits quite happily resting against the back of the unit. I get the message about a non-compatible accessory, but it transmits and charges the phone fine.
    So until something better comes out..I'm sticking with "old faithful"

  • Device not compatible with iPhone

    My new car (2010 Nissan Versa) has an auxilliary input port that allows me to play mp3 music through the radio. It worked great with my old iPod, but when I try to connect my brand new iPhone 3gs, I get an error message stating that the device (the car radio) is not compatible with the iPhone.
    I like the iPhone, but really want to listen to my mp3 music and podcasts through the car radio. Is there some way to resolve this issue?

    I have 08 altima with 3gs and updated OS4.0. emailed Nissan and told me my phone was not compatible. I cannot use the factory oem bluetooth since the update. Funny thing is it was compatible with the 3.1 OS and says so in writing in Nissan book. Apple told me it was a Bose firmware issue. I want to revert back to old OS.

  • IPhone 3G Dock not compatible with iPhone 3G (or 3G s)

    I bought an iPhone 3G dock a few months ago and I'm having problems with it. I had an iPhone 3G and recently upgraded to the 3Gs. This problem is on both phones, but more often seen with the 3Gs. When I plug it in, I get the message telling me "this accessory is not compatible with the iPhone and asks me to turn on airplane mode. When I say no, the message haunts me multiple times. It's really annoying when I charge the phone at night since the screen turns on multiple times, waking me up; or when I have it charging on the dock and an audio out cable plugged into external speakers. (When the message comes up, the audio stops). I've heard a few people talking about this but haven't found a solution. Is this just "the way" it is with 3G docks, or is mine faulty? If so, has Apple recognized it and honors a warranty? It's pretty annoying IMHO and seems pretty out of character for Apple Quality Control...

    I occasionally get that message with a standard iPhone usb cable -- the once that came with my 3GS. This could be due to debris in the connectors: It would not take much to make for a bad connection.
    You might want to try cleaning them by using a clean dry toothbrush.
    Phil

  • Bose Noise Cancelling Not Compatible with Iphone

    This really disappointed me as I am always use to connect my Bose Noise Cancelling Headphones with Ipod , but not able to connect to iphone. I thought the iphone has standard headphone output. I like my Bose headphones when I am traveling in airplane or subways as it really cancels most of the noise.
    Please let me know if anyone has any solution.
    Thanks
    Sandeep
      Windows XP  

    Here is the text of the email I just received from Bose:
    Thank you for your message.
    iPhone incorporates a deeply recessed headphone jack that makes it incompatible with most headphones on the market, including Bose. We will soon introduce an adapter that will allow our headphones to be compatible with iPhone. (Belkin, Monster and other accessory companies will also offer generic adapters)
    Thank you for contacting Bose Corporation.
    Debbie Crafts
    Customer Support Team

  • IPod and iTunes not compatible with WinXP

    It appears that the iPod (I have a 4GB nano) and iTunes (I tried what was on the CD, as well as the latest download of 6) are not compatible with Windows XP Media Center Edition (patched to the hilt, all the latest updates installed).
    Installation works fine but iPod updater does not terminate cleanly and the iPod nano does not get rebooted properly, and although iTunes sees the iPod when it is plugged in, it does not recognize it from plug-in to plug-in (it's supposed to remember the name of the iPod device, and not re-prompt you to register, etc.).
    Also, when attempting to copy MP3 files to the iPod, it appears as though they are copying but they do not wind up on the iPod no matter how hard you try.
    Windows 2000 SP4, however, does not have any problems with the iTunes or iPod updater software and everything seems to work just fine.
    It would behoove Apple to investigate the compatibility problem that their software has with Windows XP Media Center Edition, and fix it as soon as possible.

    When i startup itunes it says:
    "The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the Ipod's software"
    I am on xp media center edition 2005
    When I run the ipod updater it gives me "ipod service error"
    What can i do?
    I bought the 4gb nano just yesterday.
    both my ipod and itunes software are the Updated September 23, 2005 versions
    ps on my old pc with winxp sp2 barebones edition, it works fine...
    maybe its cos in mce 2k5 i got 2 users?

  • IPhone not compatible with iPhone dock

    Hi,
    I've been using my iPhone with both the original iPhone dock and the universal dock for a loooong time, but the past few months there has been a problem.
    When the iPhone is connected to the iPhone dock/universal dock it says (rough translation): "This equipment is not designed to work with iPhone, do you want to activate plane mode [...]"
    But all is original apple equipment and all should be compatible - what can I do ?
    Thanks
    Jens, Denmark

    Mine is currently doing this, it is also not shutting off, it reboots right after I try and turn it off, and it is not charging through my Macbook either. It won't even show up in ITunes. When I connect it it says that a USB device is draining too much power and has been disconnected. Terrific. Can't charge and won't shut off.

  • "charging not compatible with this device" after IOS 4.3 update.

    I have a belkin car adaptor that I have been using for some time, after installing IOS 4.3 I've been getting the error message saying it isn't compatible and so it refuses to charge my phone, this is important as I use it to charge my iPhone as I use it as a GPS device, i dont see how this problem has come about as prior to IOS 4.3 it charged perfectly!
    Could I have some advice on this and fingers cross that apple reads and acts upon this forum!

    I've also had this issue with charging since upgrading to iOS 4.3.1  Actually upgrading to 4.3.2 and then to 4.3.3 has not solved the charging problem.  Here's my story:
    I own an iPhone 3GS and started noticing error messages with 4.3.1 such as "charging is not supported with this accessory".  I've tried differnent USB cables and chargers (Apple and non-Apple), hooking up to computers and wall outlets.  I get the same message.  As a last resort I restored my device as a new phone (syncing works oddly) and erasing everything.  This did not help the situation.
    So yesterday I took my 3GS to the Apple Store and they were kind enough to replace my iPhone with a new (refurbished) 3GS under AppleCare. That was awesome - I love Apple. However, that didn't fix the problem
    So now I'm not sure what to do accept wait for a new iOS version and hope Apple addresses this problem.  Anyone else have a similar experience?

  • Car stereo not compatible with iPhone since iOS 7

    Since installing iOS 7, my iPhone 4S is no longer compatible with my Pioneer car stereo to use video. I can still access my music and contact for bluetooth, but when I try to use Netflix for example, it gives an error message on my phone. This was working normally when I was using iOS 6, so there is a glitch with iOS 7. I can't seem to get any help from Pioneer or Apple support...so I'm asking you folks to help me please! Is there a way to get this working again or do I have to wait for the next software update?

    In another thread on this issue, Brendan writes:
    Turns out restarting my car and/or rebooting my iphone "fixed" the issue. Apparently this was unrelated to the iOS 7.2 upgrade. Honda + iPhone has been rock solid (even if the Honda Fit UI is terrible), so I'm not sure what to make of this problem. Maybe a glitch? Who knows.
    Here is the URL for that thread: https://discussions.apple.com/message/25211736?ac_cid=tw123456#25211736
    His suggestion worked for me: turn off your car, completely shut-off your phone and let it sit a few minutes. Then reboot phone and start car and try again.
    Good luck!

  • Is whatsapp not compatible with iphone 5?

    thanks for the help!

    According to the app information on at the iTunes store it's compatible with iOS 3.1 or later.
    WhatsApp FAQ's support > http://www.whatsapp.com/faq/

Maybe you are looking for

  • Report Engine crashing on Solaris when report with graph is given.

    Hi, We are using following environment: Solaris 8 Oracle 9i Report Sevices. When we try to execute reports having graphs then the report engine crashes with the following exception: REP-0177: Error while running in remote server REP-56048: Engine rwE

  • Short dump on production server

    ABAP runtime errors    GETWA_NOT_ASSIGNED        Occurred on     28.12.2007 at 11:16:11 >> Short dump has not been completely stored. It is too big. Field symbol has not yet been assigned. What happened? The current ABAP/4 program "SAPLCEI0 " had to

  • File save issue

    Is there a way to set a default extension when saving an image using  FileReference save method? Code: var fileReference:FileReference = new FileReference(); fileReference.save( pngData, "image.png" ); Problem: If windows is set to "hide known file e

  • Can't find backup in my docouments folder or anywhere for that matter.

    Desktop manager tells me it's backing up as an .ipd file to my documents folder, but when I look for it it isn't there. Then I did a search with Windows and it doesn't find the most recent one either. Some others are there. What is a loader backup(da

  • I can't creat apple I'd, I can't creat apple I'd

    Imy apple iPod 2nd I make the apple Id but it's not working I'll try to make a lot why it's not working