IPod Adapter icon appears and nothing else happens HELP
i got this ipod and all of a sudden a picture (icon) appears on the screen its a picture of a ipod Usb port adapter and nothing else happens its stuck there if anyone knows what to do please help.
Thanx
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.
Similar Messages
-
Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.
If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
my autofill stopped working recently. I looked under preferences and all the necessary boxes are checked. When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.
Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Press the down-arrow key. (Credit to ASC member iNeight.)
2. Quit and relaunch Safari. Force quit if necessary.
3. Click in the first field to be filled, and then select
Edit ▹ AutoFill Form
from the menu bar. You may have to reload the page in order to do this.
4. Select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
5. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar.
6. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
7. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
8. Run Software Update and install any available updates. -
Hi
i have a Mac book little bit old .and I use LR5
when i want to use the defat correction tool , i open the tool , i choose "correction" and then i clic on the defaut
a second circle appears but nothing else happens . No correction
do i miss something???
ThanxIt's sounds like you're using the Spot Removal tool. What happens depends on the Feather and Opacity controls. If the Opacity is at 0, you won't see any change. 100 will give the full healing or cloning, while feather controls the size of the edge of the healing.
-
At App Store I see that Facebook needs updating. However, when I click on "update" the blue circle appears but nothing else happens.
The blue circle should go around, clockwise, as a fine line, and then as a heavy line indicating it is downloading. Then it sits while the install takes place. It may sit and wait to start the download if the internet connection is slow.
-
About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.
Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved. -
I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
RanjitSee the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2 -
My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!
Here's the Apple support article on beeps https://support.apple.com/kb/HT1547
-
Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!
Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit -
When I turn it on the apple appears but nothing else happens??
I have Ipod touch when I turn it on the apple appears but nothing else goes on help??
What happens if you try a hard reset? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If its still stuck at the Apple logo, try connecting it to your iTunes library in recovery mode and restoring it.
http://support.apple.com/kb/ht1808
B-rock -
I cannot open itunes on my mac. The Icon jumps, but nothing else happens.
I may have shut my computer off while a new version of Itunes was downloading. Not sure if this would affect it, but I can't open it now. When I click on the icon, it jumps a little, but nothing else happens! Any ideas?? Help! I can still open it on my iphone.
Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
Reboot.
Then Apple menu > Software Update.
Then reinstall iTunes. -
When I switch on my new iPad it asks me to move the slider to begin set-up. A list of languages appears and I tick English then NEXT. Another list of languages appears and the only thing to do is press the home button or BACK. I press BACK and it returns to the first list. I press the home button and a message appears saying that SET-UP was not completed do you wish to retry or continue. I press CONTINUE and nothing happens I press RETRY and it goes back to the message. What am I doing wrong or do I need to connect to I-Tunes to set-up ?
Try to connect to iTunes during the setup.
-
I've just downloaded itunes 12 onto my pc. When I connect my IPod classic 160gb, it's name shows up briefly before the ipod silhouette at the top left simply greys out and nothing happens.
Please advise.I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
My screen is grey, the apple icon appears, the circle continues to spin. I have shut done everything and restarted with the same result. Any suggestions?
The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot into Recovery by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
Mac OS X: Gray screen appears during startup -
My IPad shut down this afternoon and now it won't start up. It's less than 1 year old. I tried plugging it in and pressing the on/off button. After holding the button in for several seconds, the Apple icon appears, but then disappears.
First, try this:
Plug it in to the wall using an Apple charger and Apple cable for several hours. The idea is to fully charge it.
Then hold the home and on/off buttons together for about 10 seconds. Hopefully the Apple logo will appear and it will start. Do not release the buttons until you see the Apple logo.
If it starts, great. If not, you say your iPad is less than a year old. If you bought it brand new from an Apple Store or Authorized Apple vendor, it is under warranty. Take it to an Apple Store or Authorized Apple Service Center for diagnosis and repair.
Maybe you are looking for
-
Hi there, I made a CD booklet and submitted it to an internet print service as a pdf. I was told the document had to be changed from RGB to CMYK 8for ten bucks). Ok. The printout turned out to be very different from the proof print I had made at a lo
-
My Java (TM) Platform SE 6 U23 6.0230.5 is disabled because it's known to cause security problems. Should I also disable Java Deployment Toolkit 6.0.230.5? Both are listed in the plug in section. Also Java Quickstarter 1.o is disabled in the extensio
-
Syntax error in input mdx query on line 1 token "," Allocation terminated with essbase error 1260052 in POV execute allocation process on database ASOALLOC.ALLOCAT with pov "crossjoin([Year].[FY10], crossjoin([period].[Jan], crossjoin([account].[a111
-
Hi.. If the condition is true in servlet i have to forward to new jsp page other other jsp page. Am accessing a parameter from html.the parameter is checked in servlet for verification using ifcondition. If the condition is true i need to forward to
-
I am trying to make a class of something called tensors. What the user puts in is an integer which defines the rank of the tensor. What the rank does is it tells us how many "[]" operators there will be. So a rank 1 tensor would have private Object[]