IPod always displays lists only in A category

I have the first generation iPod touch and recently it has been putting all the songs into the "A" category so if I try to scroll to a song that starts with an "S" using the alphabetical sidebar it goes back to A. This is very annoying as I have to scroll all the way down the list of 3,000 songs. Please Help!

tgdgdfgsf

Similar Messages

Ipod not displaying list of songs

Hello,
Recently I went to update my ipod and noticed it wouldn't display the list of music that is on it while connected to itunes. It still reports that i have 23 megabytes of space left. My ipod seems to still have all the songs on it, but won't list them. I tried resetting it and using the latest sofware to access it but no luck. I guess the next step is to restore it but i really dont want to since i haven't backed up my muic . Anyone have a similar problem? Any hints?

update:
When using itunes 7, after i connect it seems to find the music however it doesn't list it as music, it regards it as other. When I connect it runs through the list of songs and says "determining gapless playback information" then anaylizing X of 2340 "Song Name" Then it reports the space as capacity 9.25gb audio 21.9mb other 9.23gb freespace 8.5mb. (I did add a 21.9mb audio file when i noticed something was wrong)

New iPod Shuffle Capacity listed only 300mb? ?

I can't figure this out: using windows xp pro sp2, and lates version of iTunes 7.02.16
iTunes sees my brand new shuffle no problem and all seems fine transferring files -
the problem:
iTunes sees my new shuffle as having a capacity of 300mb - - how do i get it to see the full capacity?

thanks - I'll look at the windows article. to be clear I have tried restoring the shuffle a few times and reinstalling iTunes latest, rebooting etc. all with same results.
the shuffle does display correctly as a shuffle in Itunes.
back in a sec after trying that windows network article

Is there any way to get an ipod to display only complete albums in the albums list?

is there any way to get an ipod to display only complete albums in the albums list (rather than every album represented by every song on the ipod)?

Sounds like there is some discrepancies in the tagging in iTunes. See this page for more information.
Grouping Tracks Into Albums
B-rock

HT1349 When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes upd

When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes update.

Are all songs checked in your playlist?

My ipod model A1367 display shows only a white screen. why is it?

my ipod model A1367 display shows only a white screen. why is it? please help me im using apple product for the first time

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

LOGICAL DATABASE - DYNAMIC FIELDS - ALWAYS DISPLAYED...

Is there any way to always display a field from the dynamic selection fields list ?
regards,
best wishes for 2009

Hi,
Thanks for your suggestion. However, there is no title bar method that we can modify to remove the buttons. I have created a Z report Category by copying the existing one and made the modifications.
In that we can hide/display UI elements which are displayed by Logical Database.
Regards,
Chiranjeevi.

Display list for Vendor search in SC tcode in SRM 7

Hi all,
We are on SRM 7.1 ECS.
THe vendor search help display list in SRM 7 in the SHOP in 1 STEP tcode displays number of columns like VENDOR ID,name,street,city etc...IN SRM 5,there were only limited number of clumns(around 6) displayed like vendor ID,name,Porg,DUNS etc.
I know in SRM 7,we can right click and always chnage the USER settings for each individual session/user.BUt if I need to craete a default display list for the vendor serach in the SC transaction,is that possible?
Also if I modify the web dynpro application to limit the no of culmns,then changes will be displayed in all the trasnction sin which the vendor search help might be used.
Users in our org have problemw when scrollingtop to bottom in the result list which is displayed for the vednor seaqrch due to the new web dynpro UI in SRM 7 and hence the query.
Any suggestions will be highly appreciated.
Thanks in advance for your time.

Hi Scot
the below is for goa . try for BP too.. Why you require TREX search . std search dont enough. since
TREX helps only if you want to enable full text search for long texts and attachments in contracts.You need to instal the trex server and configure the settings:-
1.create RFC destination of type TCP/IP server using TCODE SM59
2.MAINTAIN ENTRY IN back end systems settings
3. Activate full text search y executing the program BBP_TREX_INDEX_ADMIN .
bUSINESS oBJECT : - bus2000113
subtype usiness object :- cc for GOA or blank for operational contracts
Action for SRM TREX index :- select the appropriate value from search help . for example , you would specify A for the initial index generation.
bundle size for indexing : enter "10." bundle size affects performance. The size indicates the number of docuemnts that will be updated in one pass.if there are a large number of documents, then the size may be reduced to improve performance

Video Ipod Picture Display Issue

Hey guys,
I have a 30gig Video Ipod that displays album art when it is downloaded from Itunes -- but when I add the album art myself (say it's a local band, or an import CD) it's very sparatic as to which it will display (you'll always see it in Itunes, but very hit or miss when just listening to the Ipod alone).
Has anyone had similar issues?

My ipod will not pick up all the album art that is obviously available on itunes and it will only display it in one corner of the ipod screen. I can't figure out how to fix this either. So I can't watch my movie or tv shows because they're too small.

IPod Default Display

I have recently acquired an iPod classic (120 GB) but I have one issue with it - When playing music the screen defaults to showing the time & battery level. While this would be a nice -option- to have, I would still prefer to have the option of viewing what song is playing when I glance at my iPod. I know that my other iPods (4) display song info all the time, why can't I get this new one to do it?
I saw that someone else is trying to accomplish the same thing, but the only suggestion was to set the backlight to "always on."
http://discussions.apple.com/thread.jspa?messageID=7248353&#7248353

I saw that someone else is trying to accomplish the same thing, but the only suggestion was to set the backlight to "always on."
And that is the only way. Many of us would like the option to disable this so called "screen saver" and if you would also, then use this link to voice your comments.
iPod Feedback.

MBPro w/Mini DisplayPort to Cinema Display w/only USB and Firewire ports?

I've searched the threads for something that will explain what kind of cable I need to use my Cinema Display with my MacBook Pro, and I'm not finding anything. The MacBook Pro has the Mini DisplayPort for video out, and the Cinema Display's only ports are two USB and two FireWire.
All of the video cables I've seen in the online Apple store are either Mini DisplayPort to DVI or Mini DisplayPort to VGA, neither of which would work. Tech support told me that the computer and the display are compatible -- can anyone tell me which cable I need?

I have been using the display for several years, connected to my G4 PPC Mac Pro. Now that I have a new MacBook Pro, I was thinking of getting rid of the tower and simply using the laptop.
The cord coming out of the back of the display is connected to the tower with both the DVI plug and two USB plugs. It didn't occur to me to look on that cord because my understanding was that there was a port on the display itself, and I always think of that cord as simply a power cord.
I understand getting a DVI-to-Mini DisplayPort converter cable, but the Cinema Display is apparently powered by the Mac Pro tower. Would a laptop be able to power the Cinema Display? And would I have to connect both USB plugs to the laptop? That would take up both of the MacBook Pro's USB ports.

I changed my apple id user name on my iphone, but when i want to sign to icloud on my ipod it gives me only the old id user name

i changed my apple id user name for icloud on my iphone, but when i want to sign in to icloud on my ipod it gives me only the old id user name, and of course its deleted and when i put the old password for my old id it doesnt accept it, so please help me in how my ipod get the info that i changed my apple id, and also when i try to sign off icloud it again gives me back the old apple id and ask me for a password to turn off my find my iphone, im really confused and i tried everything.....
My ipad was changed normally and easily but my ipod is stuck and of course is not listed on my devices on icloud....please help me!!!!!!!!!!!!!

Hello oshalaby,
To get it to your new Apple ID, you would need to change it back to your old on so you can turn off Find My Device and turn it off. Once that is done, change it back to what you are currently using now. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Regards,
-Norm G.

Adding caller with name and number from call list to the contact list only inserts the number and not the name

I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
Regards,
Marc

Hey ViciousFerret,
It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
As you can see from the link below, Rogers and Fido have been offering this service since 2006.
http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
How can I get this feature request to BlackBerry for their consideration?
Cheers,
Marc

Display workorder   only related to   vendor selected in Vendor name UDF

Hi ,
I am using SAP 2007 PL 18 ,
In a Goods Issue Form I am created two UDF 1) Vendor Name 2) Work Order Nos .
Here queries related Workorder No. Display workorder   only related to particular vendor selected in Vendor name UDF .
Pl provide me FMS query.
Thanks
nitin

Hi Nitin,
My question is How you can know these Work orders are related to particular Vendor? Any relation is there between the Vendors and work orders?
Also what you calling as Work Orders? I think it is Purchase Order?
If it is PO, then try this
Select T0.DocNum from ORDR T0 where T0.CardCode = $[$OIGE.U_BPCode] and T0.Status = 'O'
The above query will show only the Open PO list. If you want all POs then remove the T0.Status condition.
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 11:13 AM

Latest ep of my podcast doesn't show in iTunes. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine.

Latest ep of my podcast doesn't show in iTunes store. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine. How do I get iTunes to display it?

I've used Feedburner many times and never had such a problem. I am a bit confused, forgive me if I ask for questions already answerd. Have you tried updating the podcast in someone elses copy of iTunes? My guess is that the file is bad since it is working in other programs but not iTunes. I would try making a new .mp4 file and podcasting it and seeing if that works.
Good luck!
~Ben

IPod always displays lists only in A category

Similar Messages

Maybe you are looking for