IPod and car stereo. Will it keep track of the play count?

I'm currently shopping around for a head unit for my car. I was just hoping someone could tell me whether or not the iPod still keeps track of play count when connected through a USB cable to the car stereo. I'm only wondering because I wasn't sure if this situation is similar to hooking and iPod to an XBOX 360 through the USB cable (which doesn't keep track of play count). If someone could please tell me what models do and don't keep track of play count, I'd really like to know. I'm particularly interested in the Alpine iDA-X305 so if someone could let me know about that one specifically, I'd really appreciate it.
Thank you for reading my post, and I appreciate any and all help given.

Kenichi Watanabe wrote:
I don't think an car audio device would be smart enough to set up a connection that is like a computer's connection to an iPod. When I use my dumb docking speaker, the play count is kept for the next sync with my Mac.
So do you think it just has to do with the fact that an Xbox 360 is pretty much a computer, therefore the iPod reads the connection as though it was a connection to a computer?

Similar Messages

I bought a used Ipod and I would like to keep some of the games that were already uploaded, it's asking me for the previous users password and itunes info. and I dont have it. What can I do?

I am trying to transfer the apps from another account to my daughters' Ipod. Is it possible to do that?

Nani\'s Ipod wrote:
I am trying to transfer the apps from another account to my daughters' Ipod. Is it possible to do that?
You cannot. This is not legal. You have no legal right to these apps.

Home stereo and car stereo connection

What are the EASISEST and BEST ways of connecting my iPod to both my home stereo and car stereo. I have done a search already and see that a connector with red and white ends will work with the home stereo. However I already have several items plugged into my stereo already. Also it is kind of difficult to reach the audio inputs on the back of my stereo. Can I just use the headphone input to get quality sound? Will this also work on my car stereo (which has an auxillary input)? I have seen that many recommend a dock, but the ones I have looked up are kind of pricy. Is it REALLY necessary? Thanks in advance.

I just got an Fifth gen video iPod , and part of the gift was a plug in the cigarette lighter power adapter to power the iPod and transmit a signal to the car radio on several select frequencies (about eight different RF settings)..
It was a gift...but I hear the transmitter would cost about a $100...
Works quite well...now - if only my car stereo speakers were only as good as the speakers on my gateway PC...(sigh).

IPod nano car stereo connectors

Does anyone know if any of the various third party car stereo connection kits are compatible with the iPod nano? They advertise that you can control iPods and iPod minis directly from the stereo controls, but they don't mention the nanos. Is the interface for controlling the nanos through the dock connector the same as that of the iPods and minis?

I'm not sure I understand your question. Do you mean to ask if the iPod nano and the iPod mini use the same type of connector? Then, yes, they do use the same type of connector.
However, there are a couple of differences between the two iPod models. For example, if you have a FireWire cable connected to your dock or an iPod cable with a FireWire connection, you will only be able to charge your iPod nano. The iPod nano requires a USB connection to sync songs or pictures.
-Doug

IPod Ready Car Stereo

Hello,
I am going on a summer vacation to California via mini van. I want to purchase an ipod ready car stereo so the kids can play all their music and mine on this long road trip. Some have aux input, some usb connection, and others an adapter that you buy along with the stereo. Anyone have one of these that can give me their experience? Thanks.
Gilbert

Check the link below. They may have an adaptor for your existing factory radio. The advantage of this is that it will likely be cheaper then a brand new head unit and with this, you can have the iPod charge while playing. I installed this recently in my car and I'm very happy with it.
http://www.mp3yourcar.com/

IPhone 3G and Car Stereos

Now that it's out, can anyone tell me if they interface with iPod compatible car stereos like regular and touch iPods do?
Thanks!

There is another really long thread (more than 50 posts) where people were reporting which seemed to work and which did not. In general, none of the old iPod-based players worked. Direct line-in all seemed to work (the ones that go from the headset jack to the aux in on your car stereo). The handful that were designed for iPhone seem to work with iPhone 3G. The same is not true for Touch-compatible ones.

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

I was updating my ipod and had to stop it so held down the power and home buttons. Now my ipod is frozen with the apple logo showing. The computer will not recognise it so it will not charge or restore. Is there anything that I can do myself?

I was updateing the software on my ipod through the wireless straight to the ipod and had to stop so held down both the power and the home buttons. Now the screen is frozen with the apple logo and the normal 'unfreeze' technique won't work. The computer does not recognise the ipod so will not charge or restore it. Is there anything that I can do myself?

Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I just loaded the new version of iTunes on the PC and now iTunes will not sync with either the iPod or iPhone. Any suggestions

I just loaded the new version of iTunes on my PC and now iTunes will not sync with either the iPod or iPhone. Any suggestions

Hello there, Duane Harris.
The following Knowledge Base article provides in-depth troubleshooting steps for resolving your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Oil got into my ipod and now it will not work at all is it worth fixing or should i just get a new one

Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?

Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

When I sync my IPod it remembers the plays and doesn't count them from 1 even though I reset the play count, any fix?

     The problem is I like to track my play counts and like it to be correct, and it was having some errors so I reset my plays on all my songs however when I sync my iPod it will remember the amount of plays for example, if I play a song once on my iPod and then sync it it will have 1 play, then if I reset the play count back to 0 and play it on my iPod again when I sync it again it will give it a play count of 2 and so forth as many times as it gets played.
     I have an iPod touch 5, the most recent iTunes update and the most recent iPod software (iOS 8.1) and am using windows 7, but I think the problem comes from the iPod because if i reset the plays and play a song through iTunes it will go to 1, but if i listened to it 3 times on my iPod when i sync it, it will then go to 4.
     I have tried restoring the iPod and syncing it so there is no music on it and then putting it all back on but the problem persists. The only other thing i can think to do is uninstall/re-install iTunes but I'm worried if I do that it will delete my music. That is not a big deal as I have back up files elsewhere on my computer but I also have album art, lyrics etc. for all my 1077 songs and id rather avoid having to get it all back.
     Anyone know how to correct this or is perhaps having a similar problem?
Thanks, Sean.

If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore

How to keep track of the users who are all currently logged in

Hi All,
I have basic knowledge of Session and Servlets. I am wondering how to keep track of the users who are all currently logged in. There should be some way of achieving it.
I thought of it and come up with having an Application variable that hold it when ever a user successfully logged in.
Thanks in advance for any reply.

You can do this by keeping data in a static veriable in a some class of yours. The variable will need to be a collection.
Whenever a user loogs in to the site a servlet/jsp should put the users information in to the collection and when logs off or when the session expires the entry should be take off.
You can achive this by storing the velues in a some sort of a week collection where the entries are automaticaly removed when all the other refferences to the entry goes out of scope.
You might need to read bit about java.lang.ref package and WeekReference
Or you can make the entry in the collection contain the last time that the user visited any of the pages and a thread can run time to time and clean up the older entries which have timed out

How to keep track of the changes done in ALV GRID Report

Hi Experts,
how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
Valuable answers will be rewarded.
Thanks,
Satish.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How to keep Track of the wagetype Changes

Hi Experts,
How to keep Track of the Changes after changing the wagetype values.If any body has made changes to the existing wagetype, how do we keep a track of what changes has done, is there any standard Tcode through which we can get the information.
Thanks in advance,
Regards,
Magesh.S

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

Keep track of the shopping cart for anonymous user

Hi,
I have the following problem on b2c site. Anonymous user can browse through the site and adds items to the shopping cart. At the checkout the login page is prompted, however login page is located on the different application server where the actual login happening. After that control is returned to my server where I need to create login object and associate the shopping cart with it. My problem is how to maintain shopping cart without losing it.
I came with that solution : On checkout attach shopping cart to context object with unique key, then pass this unique key to the remote server, then remote server passes it back to me together with the login id, then I create new session and attach shopping cart to it after retrieving shopping cart from the context.
I hope it will work, however I think there is a standard solution for this type of the problems. Any ideas, hints, suggestions are strongly appreciated.
We use WebLogic 9.0 and Servlets.

Do you have a problem keeping track of the shopping cart for a user who is logged in? No, I didn't think so. So give the anonymous user an internal name, just for your own convenience. Then keep track of the shopping cart for the user with that name. You already know how to do that.

IPod and car stereo. Will it keep track of the play count?

Similar Messages

Maybe you are looking for