Ipod and iphone no longer recognized after upgrade to 8.0.1

I just updated my iTunes to the 8.0.1 version and now none of my ipods or my iphone connect with itunes AND they won't charge via the usb cable that connects them. They worked perfectly until I installed the upgrade. Does anyone have any suggestions on how to fix this? If I uninstall iTunes and replace with previous version, will the tv shows I"m currently downloading that say 8.0.1 is required for their download, still play? Will my library still work?
Thanks for your help.
Paula

Well another reboot seemed to fix it for now. Problem solved

Similar Messages

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

IPod Nano 3G lo longer recognized after Update to iTunes 9 on Vista 32 Ulti

So i updatedt to iTunes 9 yesterday - only to find out that my iPod 3G is no longer recognized by iTunes. Also my 2G are not recognized any longer on this machine
ALL three iPods still work fine with my other computer whicgh is running the same Windows version but has still iTunes 8 installed.
With the IPod service disabled the iPods appear properly as a device - they show their assigned name and you can browse the content.
When the service is enabled and you start iTunes iTunes displays a message that says that it "discoveerd" the iPod but could not identify it
see heer http://0711.diy-punk.net/WOW/ipodfu.jpg
also as soon as iTunes gets involved the device is no longerreadable under Windows
i tried multiple reboots, restart of iPod service, rebooted the iPod, resetted the iPod - nothing helps...
This is the iTunes diagnois (in german, sorry)
Microsoft Windows Vista Ultimate Edition Service Pack 1 (Build 6001)
System manufacturer System Product Name
iTunes 9.0.0.70
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes-Seriennummer 4408A0FF9EFAA0D3
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2009-09-15 18:26:25.
iTunes befindet sich nicht im abgesicherten Modus.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GTX 275
** Info für externe Plug-Ins **
Plug-In-Name: AMIP (stub)
Plug-In geladen: Ja
Plug-In-Version: 0.8
Plug-In-Dateiversion: 0.5.0.0
Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\ituneswrapper.dll
Plug-In-Name: Last.fm AudioScrobbler
Plug-In geladen: Ja
Plug-In-Version: 0.0.2
Plug-In-Dateiversion: 3.0.2.0
Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
Genius-ID: f2f8282b830c835751cb597904744cb8
** Verbindungstests für iPod/iPhone **
iPodService 9.0.0.70 arbeitet zurzeit.
iTunesHelper 9.0.0.70 arbeitet zurzeit.
Apple Mobile Device service 2.50.39.0 arbeitet zurzeit.
Universal Serial Bus Controller:
Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Gerät funktioniert wie vorgesehen.
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Gerät funktioniert wie vorgesehen.
FireWire-Host-Controller (IEEE 1394):
AGERE OHCI Compliant IEEE 1394 Host Controller. Gerät funktioniert wie vorgesehen.
Zuletzt angeschlossenes, jetzt nicht verbundenes Gerät:
iPod nano (3. Generation) mit Firmwareversion 1.1.3
Seriennummer: YM741YNKYXT
** Sync-Tests für iPhone/iPod touch **
Kein iPhone oder iPod gefunden

Yeah... I hope apple solves this problem soon. =\
I use Windows XP instead of Vista...
This happened to me:
I plugged my iPod
Oppened the iTunes, iTunes recognized the iPod with all the songs, album covers, playlists, etc.
It asked for update. (Download & Instal, ok)
Finished the update, oppened the iTunes 9.0. Added a new songs but then I realized it didn't recognize the iPod (wich was plugged.)
I checked on "My computer" and I saw "iPod". Ok.
When I ejected the iPod it was clean. No musics, no Videos, no playlists. Started on the screen "Select your language".
I Tried reinstaling the iTunes but whenever I got an older version it said something like "The iTunes can't be started because the iTunes library has been generated by a new version."
Restarted my PC several times.
Rebooted the iPod.
Tried switching USBs.
NOTHING works.
Nothing at all.
even tryed the manage thing on "My Computer".
If they don't find a way of fixing this bug my iPod Nano is not better than a f**kin' Pendrive... ~.~"
Hope apple do something...

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Firewire drive no longer recognized after upgrade?

having an onset of problems the last 2 weeks.
first upgraded to 10.4.6 on mac mini 1.42 non-duo, worked a few days than acted weird with apps crashing. had to reinstall from 10.4 disk. seemed ok. repaired permissions, ect. after reinstall (and a subsequent power outage) a firewire drive attached at time was no longer recognized by mac mini or connected imacG3. reinstalled 10.4.2 on mac mini. installer unable to reinstall 10.4.6., I would like to have firewire drive recognized again. when attached to other firewire drive in daisy chain, says device unrecognized, other wise unable to get any info on drive. what to do?

I am having nearly the exact same issue as you are experiencing. My Western Digital Dual-Option Media Center 160 GB FW HD is going in and out big time. It seems to be there for a time but then conks out. I have to disconnect the power and now the drive seems to be malfunctioning.
Same story with my LaCie 52x CD Burner. I placed the Disk Warrior CD in there and the computer recognized the disc at first but then spinning beach balls galore!
This has to be one of the worst updates to an OS X system I can remember. I can only think PowerPC QA testing has gone through the toilet since the Intel move was completed.

Can't sync iPod and stuck in restore loop after upgrading to iTunes 7

I cannot restore my iPod using my desktop, so I use my laptop to do it and it seems to work and I can transfer music to it, but when I reconnect it to my desktop, it tries to erase and resync with the other iTunes library. It seems to go through and I can see the status of all the songs being copied to the iPod, but when I then disconnect to see if it happened, it shows no songs. When I reconnect it to either the laptop or the desktop, it tells me to restore it. Only the laptop will restore, the desktop gets in the restore loop. I tried the selective startup, the drive letter change, the reinstall of iTunes, nothing works. Can anyone tell me if this is an iPod error or a software problem?

Try the following. I expect you will have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod and iPhone no longer syncing with iTunes

First my iPhone would sync. I would get a "could not sync" because iPhone timed out. It would start and do several things (backup, sync contacts) but then seemed to get stuck transferring an application purchased on the iPhone to iTunes.
But then I realized that my iPod won't sync either. Again it starts but then I get a beachball.
So at first I thought I had an iPhone problem, but now i think something must be wrong with iTunes.
Anybody have any suggestions?
Thanks, Tony

I'm having a similar problem.
I have 2 ipods.
I have an Ipod Nano 2nd Generation, and an Ipod Touch 2nd Gen.
My 1 year old HP has been in the shop for 7 weeks now, i bought a Macbook Pro.
I try to sync either one of my Ipods and the device does not show up under "devices".
I have authorized the Macbook Pro.
What do i do???

Videos and movies no longer recognized after AP 3.3.2 restore

I had to restore my entire hard disk due to corruption by Apple's iPhotoLibrary Upgrader utility. After a Time Machine restore (suggested by Apple Support), I realized that I did not backup the AP3 application. I got out my original AP3 install DVD, installed it, then upgraded it thru Software Update to vs 3.3.2.
After spending a day reconnecting my images to their references and updating the previews, I realized that my movie/video files are no longer playable in AP3.
The movie thumbnail appears distorted. Clicking on it opens the Viewer, but no movie appears. When I select 'Show in Finder' for a movie, the master file is correctly shown. The Master file is fine, it plays in Quicktime just fine.
I tried to reonnect the video files, but they have 'Online' status and the reconnection accomplishes nothing. I did note that when I go into the reconnect panel, I cannot see any movies in the bottom window, just jpegs and raw image files.
I took a new movie with my camera and tried to import it. Aperture does not see the movie on my flash card.
I tried opening my other libraries and observe the same behavior. So this problem is with the application and NOT the specific library.
I've also repaired permissions, and rebuilt the library, with no success.
The only thing I haven't tried is to reinstall AP3, which I just did yesterday. It just feels like my copy of AP3 doesn't have all the 'movie parts' included.
Any help or suggestions are appreciated. Thanks.

I haven't selected the RAW+jpgs pair or anything,
You need to select exactly "RAW+jpg" pairs, otherwise, Aperture will import only jpeg or raw, and a video file is neither of those. If that does not help, check your video codecs:
Check, if you have the codec 3ivxVideoCodec.component installed, see how to remove it, if necessary: Aperture 3: May be unresponsive or have slower performance with third-party video codec
Also, try if removing the Flip4Mac video components will help, if you have them installed.
Regards
Léonie

Help! iPhone no longer recognized after update/sync

Help. After months of delaying doing the update for my iPhone 3gs, I finally hooked it up tonight. Well half way through the update an "unexpected error" occured. Now my phone only has the 'connect to itunes' screen. I've tried rebooting my pc and phone. The phone will show the apple then the 'connect to tunes' screen. Now iTunes won't recognize the iPhone and my computer doesn't want to see it as a device. Help! Not sure what else to try, why it happened or what to do. TIA

Try kicking it out of recovery mode with RecBoot. If that does now work, read through section 3 in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Dropbox folder no longer recognized after upgrading to yosemite

After I upgraded to Yosemite my dropbox folder is no longer syncing to dropbox. Has anybody else had this issue?

Yes - also, the dropbox icon on the top bar goes to a white blank if I've closed and opened the lid to my Macbook Air - I do a restart to see it and to access files - weird.

SD camera card no longer recognized after upgrading to Windows 8.1

After I upgraded from Windows 8 to Windows 8.1, my computer no longer recognizes a camera SD card. Any suggestions?

Hi,
Regarding your issue here, we could take the following steps for troubleshooting.
1. Please check the device manufacturer’s website, see if there are any updates regarding SD card reader available;
2. Please refer to the KB below to use the Microsoft software updates.
Activity isn't detected when you insert or remove an SD card in Windows 8.1 or Windows Server 2012 R2
http://support.microsoft.com/kb/2929878
If there are any problems, please let me know.
Best regards

Ipod and iphone no longer recognized after upgrade to 8.0.1

Similar Messages

Maybe you are looking for