IPod and no audio with .m4v movies

OK I downloaded and installed iTunes 7.0.1.8 and synced my iPod was told I needed to update the software on my iPod to version 1.2. Now on some, not all of my .m4v files there is no audio on the iPod, the video plays fine on the iPod, and the .m4v file plays fine in iTunes, with audio. But on the iPod there is no audio. Other .m4v files play with audio on the iPod. Things I've tried:
1. I've reconverted the files, and re-synced them to the iPod, no change.
2. I've tried other files, some have audio, and some don't so it's more than one file, and more than one source.
3. I've tried to restore my firmware on the iPod, you can't by the way anymore. All I can do is reload the 1.2 version! Bad apple.
4. There is no indication on the iPod that there is a problem, just no audio. In the get information area, I've boosted the audio to max, with no change on the iPod.
Help

Well the problem seems to be in how iTunes converts video, I download MPEGStreamclip1.0.1.zip from SQUARED 5 installed it and converted the file and I now have audio! It's an extra step, but if you need video and want sound, it's the way to go.
DAH
OK I downloaded and installed iTunes 7.0.1.8 and
synced my iPod was told I needed to update the
software on my iPod to version 1.2. Now on some, not
all of my .m4v files there is no audio on the iPod,
the video plays fine on the iPod, and the .m4v file
plays fine in iTunes, with audio. But on the iPod
there is no audio. Other .m4v files play with audio
on the iPod. Things I've tried:
1. I've reconverted the files, and re-synced them to
the iPod, no change.
2. I've tried other files, some have audio, and some
don't so it's more than one file, and more than one
source.
3. I've tried to restore my firmware on the iPod, you
can't by the way anymore. All I can do is reload the
1.2 version! Bad apple.
4. There is no indication on the iPod that there is a
problem, just no audio. In the get information area,
I've boosted the audio to max, with no change on the
iPod.
Help
PC   Windows XP Pro  

Similar Messages

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • Is it possible to see a film on appletv trough iPod  and ear sound with ear sounds with headphone of iPod?

    Is it possible to see a film on appletv trough iPod  and ear sound with headphone of iPod?

    No

  • HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

    HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

    Did the microphone come with a user manual? You might contact support for the microphone.
    Just so you know the iPhone 4 has a built-in microphone

  • We have 2 ipods and 1 ipad with different apps all synced to one computer.  How do I prevent these apps from automatically being synced to all three devices each time I do a backup/sync?

    We have 2 ipods and 1 ipad with different apps all synced to one computer.  How do I prevent these apps from automatically being synced to all three devices each time I do a backup/sync?

    Uncheck the option to automatically sync new apps to the device.
    Other than that, syncing is by device.
    Connect one device, tell iTunes what to sync, then sync.
    Connect second device, repeat.
    Connect third device, repeat.

  • TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

    does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

    According to the compatibility chart on this page, yes it does.
    http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
    B-rock

  • I convert (music) movies to ipod and loose audio but picture is great

    i have music video in movie section of my itunes and use right click "convert to ipod" the visual clip is on my ipod but no audio. i have just upgraded my itunes and up graded my ipod software too... can someone help me please

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Problem with .M4V movies

    I use handbrake to rip and convert my DVDs to .M4V under the given "MP4 File" setting. However, when I drag and drop the movies it says it cannot copy them over because they are not the correct format.
    I have an iPhone 3G S and a Macbook 2.0
    Thanks in adv.

    The video needs to conform to the following video specs:
    Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Check the file info to see if your .m4v file conforms to the above specification. Also you might want to try the iphone or ipod preset in handbrake

  • IPod touch no audio with FaceTime

    connected iPod touch with iMac using FaceTime, video is great but the iPod has no audio, the iMac works fine, so only missing the audio on the iPod. Tried iPod head set and reloading the FaceTime software on the iMac, no joy. Suggestions?

    jontue wrote:
    I want to test my Face Time re: no audio with facetime, but I dont have friends who have an Ipod Touch 4 or Iphone 4, can anybody help me out?
    You can test with me if you like. Click my name at left to find my FaceTime contact info. I only use the email address there for FaceTime, so there is no need to send email. Simply get my FaceTime contact info and call when you want to test FaceTime. Best time to test with me is 14:00 GMT - 03:00 GMT. I answer test calls whenever I am available, so try later if I miss you.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Exporting Audio with Quicktime Movie - Error 29562

    There was a prior post about this that the OP marked as 'Answered' but it really wasn't for myself and a few others, so I'm posting a new topic. Sorry if that's inappropriate.
    Using Logic 8.0, I've scored a section for a film and want to bounce that scene for client approval. I have the scene set with cycle region and I go to Options>Movie>Export Audio to Movie... I'm leaving the settings at their default states, and Logic runs through the process of bouncing the file, but at the end I get "Unknown System Error. Result Code=29562"
    I've searched around and can't figure out what's going on. This worked fine for me on the last project I did in Logic 7 a month ago, but for some reason not working in Logic 8. Haven't applied the latest Logic update as some folks were complaining about it and I'd already started this project. Anyone know if it's addressed there?
    Otherwise, thanks for any help!

    Just installed Logic 8.0.1 and the problem has disappeared! That's the only thing I've tried since the update, so I'm assuming it's fixed anyway. Now to see if anything else goes screwy....

  • Logic pro 8 sync problem, audio with Qtime movie  ......Help please....

    Ok.
    I import Qtime movie into logic and extract audio track.
    I drop extracted audio track into arrange window at start lined up with movie track.
    Play movie to test, its out of sync with audio.
    Check settings.on hardware and file info of Qtime movie.....48khz 24bit 25fps.
    Only difference is audio from Qtime is 16bit not 24, as I understand the bit rate should not make any difference to the sync.
    So I decide to sync visually the audio extract to the Qtime movie to check.
    Play it back, roughly in sync.
    I go to header of track and discover my audio track know starts 12 frames later
    than the Qtime movie to be in sync.?? Why?
    I export audo back to Qtime movie.
    Play movie in Qtime...and....yep... its out of sync. by I guess 12frames
    I use sound track pro for the same project and this does not happen. why?
    everything is legal bought and payed for,All running on same computer and same hardware G5ppc and digi 002 rack.:(
    Any Help greatly appreciated.
    Regards
    James

    Hi Kate:
    So, just to be sure, have you seen these?
    Audio Sync "Fixes"
    http://www.danslagle.com/mac/iMovie/audio/1001.shtml
    iMovie: Improving audio and video synchronization
    http://docs.info.apple.com/article.html?artnum=42974
    iMovie: Use 16-bit audio for best results
    http://docs.info.apple.com/article.html?artnum=61636
    Sue

  • Older iPod and Viewsonic Monitor with dock

    Hello All,
    I just bought the 22" Viewsonic LCD monitor with iPod dock on it. I have an older 40gig iPod. (almost 4 years old)
    The doc sync's with my iPod and iTunes just fine, BUT it does not charge. I originally thought that it was an issue with the monitor, but after repacking and replacing it, I still have the issue on my new monitor.
    Is there some kind of charging issue with the older iPods and this dock? Any thoughts would be appreciated.
    Thank you,
    v

    I just purchased the 22" View Sonic and my 5th Gen Video iPod won't even sync with iTunes. In fact I get an error messagage from windows saying the devices is not working.

  • 120GB of music and other audio with nowhere to put it.

    I have a ton of music and various audio but no hard drive space on my iBook. All my music is stored on external hard drives. I want to get a computer to use solely for iTunes. I don't expect much sympathy, but is there a cheap PC I could get or should I stick with a Mac.

    Off the top of my head, two suggestions:
    1. Have you considered purchasing a used iBook/MacBook? Personally, I would rather have one of those than a new, budget-priced Windows PC; especially if I were purchasing the thing solely for use with iTunes. The Windows version does not integrate with the operating system as well as the Mac version does, for obvious reasons.
    2. What Meg said. A terabyte internal hard drive will give you plenty of space, and is a lot cheaper than a second computer.

  • How to manage 2 iPods and 2 libraries with same laptop?

    I have one Windows laptop. I have an iPod and an iTunes library. I store my iTunes tunes/movies/podcasts on an exernal hard drive because there isn't enough space on my laptop. I want to purchase a second iPod for my son and manage his iTunes library in the same way - same laptop, same external hard drive.
    I created a separate library and quickly got confused. Is it possible to have two separate libraries for two separate iPods but use the same laptop and external hard drive? IF possible, how should I do this?

    Click here for options.
    (34261)

  • Can you take one ipod and sync it with another?

    I am new to this technology, I have a friend who has an ipod with videos and music on it, can I take my ipod and transfer his music and videos to my ipod?
    also if I have videos and music on my windows media player, can i transfer those on my ipod?
    Is windows media the same as itunes?
    Hope someone can help me out.

    In the OP's defense, he/she never mentioned that the music or videos were copyrighted.
    There are a couple apps you may be interested in:
    1)SharePod -- http://www.sturm.net.nz/website.php?Section=iPod+Programs&Page=SharePod
    This'll copy music to/from an iPod/PC. Not sure about videos, though.
    2) YamiPod -- http://www.yamipod.com/main/modules/home/
    Same basic idea as SharePod, from what I gather. I'm not sure about videos for this one, either.
    Using these apps, you could copy music from your friend's iPod to a PC, and from that PC to your iPod. Remember though that this is illegal if the music is copyrighted and you haven't paid for it.
    No, Windows Media Player is not the same as iTunes, and I doubt that you can copy videos from Media Player to your iPod. iPod videos need to be encoded in a certain way in order to work properly. That means that your collection of .mpg's, .avi's, and .wmv's probably won't work on your iPod. You might want to Google for iPod Video converters.

Maybe you are looking for

  • How to use BAPI_MATERIAL_MAINTAINDATA_RT function module in SAP Reatil?

    Hi, I am facing aproblem with BAPI_MATERIAL_MAINTAINDATA_RT function module when i send Article Master data from one SAP Server where all Article Master Data is maintained to another SAP Server where all Transaction Data is maintained. how can i use

  • Why my macbook pro freezes when I export pictures to usb flash memory

    I am a new mbp user and mainly organize my travel pictures using my macbook but recently I cannot export my pictures to "burn" or copy to other flash memory. I have been diligently backing up using the time machine but as the file size grows i think

  • ORACLE_HOME of 11g on Linux/Unix

    Hi, is default ORACLE_HOME of 11g on Linux/Unix as follows : /softwares/app/Administrator/product/11.1.0/db_1 Thanks and regards.

  • Problem when trying to create a template with vdi 3.2.1

    Hi, I´m using vdi 3.2.1 in solaris 10 x86. I´m using Virtualbox in the same server as a desktop provider. I created a windows 7 virtual machine without any problem. My problem appears when I´m trying to import that VM into a template, I follow "Pools

  • DM material

    Hi All, We have created the Purchase order and enter Delivery block in item detail customer data, the purpose is we block the purchase order.  But system allowing to do the outbound delivery.  Any body can please tell me how can we resolve this issue