IPOD and White Icons

Some of my ICONS on the IPOD are white, how do i get them back to normal

Reset your device by holding the sleep and home button until the Apple logo ocmes back again. This should get your icons back to normal. You will not lose data doing a reset.

Similar Messages

  • IPOD and white screen asking in different languages

    Hello everyone
    My ipod has been acting up for the pass few months and now i have had enough.
    When my ipod is connected to my fm tuner, when it is time to take the tuner off, it gives me a white screen saying in different languages to connect to computer and restore. I have restored my ipod about 20 times in the past months. I work on linux and have a vitual windows xp
    is my ipod broken or what

    Hopefully the battery has leak after long disused.
    Recharge the iPod battery for at least 4 hours, normally it would take 30 minutes of recharge before the screen comes to live.
    Disconnect the iPod, safely, after charging.
    If your battery is good and can recharge fully.
    Hard Reset the iPod - Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON.
    Select your preferred language.
    Connect your iPod back to the Mac, and see if it is recognised by iTunes or Finder
    Good Luck! and you will need it when syncing your iPod.
    Here is the Apple Support Article for reference
    http://support.apple.com/kb/TS1410

  • Podcasts not on ipod and two icons in itunes?

    I have been listening to podcasts for months but all of a sudden I'm getting problems...
    I synced my ipod with my new podcasts but found that the podcast folder on my ipod said 'no podcasts'.  They weren't in the music folder either, but when I used the search function I did find them.
    When I checked in itunes there was now two itunes icons in the drop down menu with past podcasts that have been long deleted (they couldn't be played as they no longer exist!  I did check on the computer for the files and they can't be found).
    I can't delete the second icon and can't find a way to make them visible on my ipod classic.
    Thanks for the help,
    Gary

    Well, I reset the nano by holding the menu and center buttons, twice. I dont know what that was supposed to do but nothing changed, not the menu or the amounts of free space. Im going to try a restore now...which I dread because filling an iPod from a library larger than the capacity of the iPod is a pain.

  • Black and white and coulored icons in Gnome3 title bar

    Hello all,
    I wonder about icons in the Gnome3 title bar. I did'nt changed any related settings.
    I have an up to date physical installation and an up to date Virtual Box with beautiful black and white icons:
    Today I upgraded a clone of the Virtual Box machine. This machine was not updated since months. The icons are colored now.
    I thought all up to date installations should have the same theme and icons. Just for know, why they are different and where can I fix it?
    Last edited by wwn (2014-05-07 13:14:44)

    Don't export it as a .jpeg which is unsuitable for B&W images, blurring them as rgb files (not B&W).
    Better is .tiff (compressed B&W tiff are tiny) or 1 bit .gif.
    It is also possible that .pdf vector files might work but I haven't experimented with those.
    http://www.google.com.au/search?q=black+%26+white+vector+patterns&hl=en&client=s afari&rls=en&prmd=imvns&tbm=isch&tbo=u&source=univ&sa=X&ei=T0yYUNjqOKaTiAeqrYGwA Q&ved=0CCkQsAQ&biw=1138&bih=1272
    http://www.graphicswall.com/black-and-white-vector-patterns
    http://all-free-download.com/free-vector/black-and-white-vector-pattern.html
    http://www.freevector.com/category/patterns/
    http://vectorpatterns.co.uk/patterns-2/a-transparent-black-and-white-arrow-patte rn-set/
    http://pattern8.com/
    This is very retro lo-tech with unattractive results, which is why I guess Apple hasn't bothered with them.
    Peter

  • Black and White photo with splash of color

    I just bought photoshop elements yesterday. I'm completely new to this and I want to know how to make a photo turn b/w, but keep a point of color,ex: a red hair bow but everything else b/w.

    Another way is to create a Hue/Saturation adjustment layer over your photo. (It's one of the choices that is found on your layer's pallet under the black and white icon.) This will create an adjustment that can be masked.
    Double click the adjustment layer with "Master" selected and move the saturation slider to -100. Once this is done you can use the paint brush to paint back color. (Black hides the adjustment; white reveals the adjustment; shades of gray provide a partial adjustment.)
    I think the mask option is preferable to using the eraser because you can easily go back and refine the image if you make a mistake. It also gives you the opportunity to change your mind without having to start from scratch. Another advantage is that your image will have a smaller file size.
    You can also use filters that work in gray scale on the mask. One useful one is Gaussian Blur. I like to paint my selection edges with a hard edged brush then soften (feather) the edges with the Gaussian filter. The Maximum and Minimum filters are useful if you need to expand or contract the mask edge a little.
    If you want to have more control over the black and white adjustment, use the pull down menu in the Hue/Saturation adjustment dialog to select each color; reduce each of the colors to -100 Saturation; then go back and adjust the "lightness" slider of each color to taste.
    HTH,
    Terri

  • I have the first ipod and i have a pad lock icon @ the top ? what happened and how do i get it unlocked ?

    I HAVE THE ORIGINAL IPOD AND SOME HOW I HAVE PAD LOCK ICON THAT SHOWED UP HOW CAN I UNLOCK IT

    Richard
    Have you tried resetting it. You do this by holding down the home( white middle button) and the Menu button at the same time. Keep holding until it comes back on. I had the same problem and it worked after holding for about 10 seconds. Also if you need technical help call a local store and talk to the phone rep. They will often give you tips without charging you the $35 that the Apple Phone Service charges you just to help you. Good Luck! Jim

  • How to get rid of white icons on ipod touch 4th generation

    How do you get rid of white icons on the ipod touch 4th generation.  I tried resetting it already.
    Thanks,

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Was just given 80GB iPOD classic. It turns on, however screen displays black and white frowning face and ipod support address. Is this ipod toast?

    was just given 80GB iPOD classic. It turns on, however the screen displays a black and white frowning face and ipod support address.  Is this iPOD toast?

    iPod displays a sad iPod icon
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    http://support.apple.com/kb/TS1373

  • I have a MacBook using Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows on my desktop, but the device does not show up on iTunes.

    I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes.  The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iPod touch screen went fuzzy with pink and white stripes

    Hello! I really appreciate if anyone would tell me what's wrong with my iPod touch.
    I have been using my iPod touch for less than a year, and honestly, I have quite a bad habit: I always use it for playing games. And sometimes, I even use it while it is charging. Usually it's fine, nothing went wrong, so I keep doing the same thing sometimes.
    one day, I'm visiting my relative and tried to charge my iPod. Since my iPod doesn't have an adaptor, I usually charge it using my laptop (the seller told me to charge it in a laptop/computer). One day, I borrowed my cousin's laptop to charge my iPod, but she only gave me an adaptor (not made for iPod or any apple products, but it fits so I thought it's okay). But the next day, I found out that my iPod went off by itself and I know that my battery isn't low.
    I Tried to charge it using my laptop at home, but it still went off! Also, it went normal in my laptop (the iTunes appeared automatically, as a sign that my iPod is charging). So, I tried to restore it and I worked (at least I thought so), until I saw my screen went fuzzy (pink and white stripes). So, almost everyday I turn off my iPod, turn it on again, wait for a while, then use it normally. Usually it lasts 'normal' for hours, but it will still be error as usual.
    So, my question is:
    What makes my iPod touch screen went fuzzy?
    Is it because I used it while charging?
    Is it because I charged it with an adaptor that is not made for Apple products?
    please help me, I don't know what else to do! I have restored it, I didn't download many applications like I used to before, and I left it alone when I was charging (I didn't play it while it's charging any more), and I even didn't turn on the Wi-Fi if I'm not using it (I almost NEVER turn off the Wi-Fi before my iPod touch went error)
    Thank you for answering..

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Ipod photo stuck in disk mode and screen is in Black and white

    came to use my ipod photo after about a week of not using it. when i took it out the colour screen was in black and white and the screen is stuck to saying it is in disk mode with a large tick.
    the ipod will mount and does show up in itunes it will even play songs via itunes. i have tried resetting to no avail and my next option was to restore to factory settings which i am loathe to do as i have songs on my ipod that are no longer in my itunes library.
    anyone had similar issue or can suggest a fix
    thanks

    well the problem has been solved...hope this may help others having this issue.
    i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
    pretty random, but glad it is all working again.

  • TS1363 just did an update on my daughters ipod and now it says to hook up to itunes with the icon and when i do its not detected any help

    im just trying to update my daughters ipod and now its not being detected by itunes when i try to hook it up after the update it said restoing itunes the it showed the icon to hook up to itunes so when i did nothing no ipod detected so i diconectend the usb and reinserted it and still no ipod detected any help

    Try connecting the iPod to iTunes in recovery mode and restoring it again.  Use the instructions in this Apple support document to get the iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • 80GB ipod only outputs in black and white

    I just bought a new 80GB 5th Gen iPod and hooked it up to my TV and it only outputs the picture in Black and White. If I take my old 60GB 5th Gen iPod it will output a picture no problem in color with the same TV and the same cable hooked up the same way.
    All TV out settings are the same:
    TV Out: Ask (I turn to ON)
    NTSC
    Widescreen On
    Cable: Apple's iPod AV Cable M9765G/A
    The weird thing though is if I take my new 80GB 5th Gen iPod and hook it up to my "MyVu" headsup display, it displays in color. It just won't do it on my TV.
    Why won't it display color on my TV?

    Try a different Video file on the 80 GB;to see if any changes? Are there any other title;s Videos are Podcast,
    TV Shows that will playback in color-- if so It's possible that your file format is not compatible.
    Check to see how the video files are define by format, frame rate etc; that your using as a reference to playback on TV.
    See if you have any other Video's on the 80GB that will play in color.
    Make sure your 80GB is using Itunes Version 7.0 or higher
    Compaq PC 6370US / 1GB Ipod Nano & 80GB Video   Windows XP   Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

  • My older ibook g4 is locked up with an icon flashing. looks like a file folder flashing a blue and white face/question mark. what is this?

    my older ibook g4 is locked up with an icon flashing. looks like a file folder flashing a blue and white face/question mark. what is this?

    Apple's suggestions for dealing with the flashing question mark folder:
    http://support.apple.com/kb/TS1440?viewlocale=en_US
    Niel has summed it up pretty nicely.

Maybe you are looking for

  • JSP -- how to pass a variable

    Hi, I am relatively new to JSP/Java and am currently trying to figure out how to pass a value gotten from running a query into another query. My code is below .. I am trying to pass 'tsid'. For simplicity I have hard-coded some values. I have tried 2

  • Can't get past home page of instructables after upgrading to firefox 13

    I can load the home page, but if i click on anything past it, it acts like it continually loads, nothing comes up on the page, it sticks at "Transferring data from www.instructables.com..." or "Read www.instructables.com" it seems to only have happen

  • Creating a new database in a new Oracle home

    Hi, I'd like to add a new database using dbca, but I want it in a different Oracle Home to the other databases on the server. I notice that in the dbca I do not get an option to specify a new Oracle home. I assume it is because this tool is only for

  • UPDATING/SYSTEM INTEGRATION QUESTION

    1. I have Logic 7.1.1 installed on a Dual G5 running OS 10.4.2 2. I have a multiple computer system (PCs) running GigaStudio, Vienna Instruments, and other VI's. So I can have the maximum number of MIDI ports available, I'd like to use the Mac/PC ver

  • Secondary pixel dimensions in project window...

    Hey, what do the second set of numbers mean in parenthesis? I don't recall seeing them before.