IPod app sound level in multitasking is very low, is there a solution

I have a Pioneer stereo in my car with iPod connect cable. When I plug in my iPad and play songs from it with the iPod app it works as it should and I can hear the songs in the car speakers.
BUT, when I turn on my GPS App, CoPilot, the iPod app goes in the background and continue palying songs but in with a very low volume, van barely hear it. The CoPilot directions voice is loud and clear.
Is there a way to keep the sound level in the iPod app even if it is in the background?
Thanks

Hi.
Firstly, try going into ipod and turning up that volume, without using the hardware buttons.
If that just also increases the sound of the CoPilot directions, try changing the settings of the CoPilot app.
You could try contacting the developer of the app via the following links:
[CoPilot Live HD Website|http://www.alk.eu.com/copilot/ipad>
[CoPilot Support|http://www.alk.eu.com/support/copilot-support>
Hope this helps. Remember to mark this as helpful or solved if that is the case.

Similar Messages

The sound from my facetime is very low. I have gone to system preferences and adjusted the sound, it makes no difference and I cant hear when it rings

the ringing sound from my facetime is very low and i cant hear it at all unless i am already using the notebook and facetime opens. I have tried to adjust the sound of my notebook, on the whole the sound is not high

Try resetting the SMC:
http://support.apple.com/kb/ht3964

Ipod apps suddenly stop working, please help very fustrating!

I got a new Ipod Touch and sometimes the apps I've downloaded work fine but then some of the apps, after I tap on them, will load for a few seconds and show the splash screen but then will stop working and I'll end up back on the home page, and I have to re-install them from the app store so they will work again, Why does this happen? thx!
(Ipod 2g) (latest firmware)

There is a thread I think similar to this
http://discussions.apple.com/thread.jspa?threadID=1735940&tstart=30
I had something similar happen. I ended up deleting the app and then downloading them from my computer. I have also heard that if you restart your ipod before running the app for the first time that may work. Apple though is aware of the issue.

My ipod 5 was stolen but I have find my ipod installed on it but my ipod isn't/never was connected to a wifi network when it was stolen so how will my ipod play sound or go on lost mode and if there's no wifi connected to it?

my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?

Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

HT201401 sound out of ear speaker very low turned up all the way sounds muffled

can barley hear out of ear speaker with music or on calls loud speaker works fine ear phones work fine just ear speaker very quiet tried restore from itunes no help do i need to replace the ear speaker or is there something else i could try, tried sucking on speaker and blowing it out no help.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

My iphone speakers would not make sounds, or sound effects like the keyboard etc. Is there a solution to fix this?

The only sound i could get is when i plug in my headphones but without it my iphone doesnt make any sounds or hear anything at all. Please Help!

Is the silent switch on?
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Nokia N95 8G Bluetooth sound levels

I am hoping someone out there can help me with a small problem with my bluetooth headset and phone.
I have a Jabra BT250 headset which i used to have paired with my old N73 and the sound levels on it were very good but now having it paired with my N95 8G the sound levels are not great. I have turned up the volume on the phone and headset to maximum but it still does not produce good enough sound.
I used to have to turn down the volume using my old N73 but now i am wondering how i can turn it up.

Hi,
I have the same problem - bought a bluetooth headset so I can use the GPS function on my motorbike but as soon as you activate the GPS the headset is disconnected.
I've managed one work-around so far - I've told the GPS software to use my external bluetooth GPS receiver and not the internal one. Now the headset works.
It's not what I'd call satisfactory but it works. Would love to use the internal gps receiver tho.
Any suggestions?

I dropped my ipod now it says "very low battery"!!

I dropped my old ipod from 2006 and now it says "very low battery" and "www.apple./support/ipod !!!
and also a picture of an weird looking iPod with X as eyes and sometimes sounds come out of the ipod.
Please I´m in desperate need of help!
Message was edited by: niinaa

Firstly, i believe it is the time to have the battery replacement, see if the following helps
http://discussions.apple.com/thread.jspa?threadID=1591975&tstart=0

M-Audio FastTrack USB - very low signal level (line/guitar)

I've used FastTrack USB for a couple of years with a microphone through the XLR input with no problems. Now I am trying to connect a line output of a synthesizer to the line input of the FastTrack and the signal level is very low. There is no noise, it's just quiet, even with the track volume all the way up it's still no match for the rest of the tracks.
Any suggestions, except for trying all the knobs and switches on the face and back of the unit (tried that already)? Anybody has similar setup?
I use FastTrack for audio input, and built-in audio for output, it's connected through a hub (no problems for two years). In GB microphone is going to the Channel 1 (mono), and still works fine. Synthesizer goes to Channel 2 (mono) and is really quiet. I tried the syn with two different 1/4 cables with no difference. The headphones jack on the front of the FastTrack works fine with the normal level adjustment range, and if I plug in the headphones directly into the line out of my syn, I have sound, quiet (like you would get by connecting headphones to any line out, turntable even) but steady, so the syn must be fine.
Any thoughts?

No takers. Hm. OK. After some more research on the Net it appears to be that all the Fast Tracks suffer from the same problem, which makes me believe that it's not a bug, but a feature of an unexplainable kind. Oh, well, back to my old iMic noisemaker (this one works, it's just screened very poorly, so it picks up all the possible interference, and also makes its own little nasty hiss--this is why I switched to the Fast Track a while ago--so I will need to cut it out with an EQ, again). Hopefully, the EQ surgery will not affect the synthesizer's sound consistency as severely as it use to do with a microphone.

Sound levels from dock

When using my iPod via the dock connected to my sound system the volume is very low. I remember reading sometime ago, there was some sort of fix for this. Grateful for any help, please!
Thanks

There is a +Sound Check+ setting on the iPod's settings (set ON and OFF on the iPod's screen). This is supposed to equalize the volume of all of your audio files, but it may be malfunctioning. So if it is ON, you can try turning it OFF. You can also +Reset All Settings+, on the same settings screen; this may help set the iPod back to normal.
On the iPod's DEVICES screen in iTunes, some iPods have a setting to +Limit Maximum Volume+. You should check that setting to see if it is turned ON.
If the problem is not resolve, you should try using the Restore button in iTunes to erase the iPod's hard drive and initialize the iPod's software.

Sound levels

Hi!
I have a movie of a group of singers at an event. The event sound levels were set up for speaking and there was a direct XLR feed into the camera. When all five of them are singing it's very distorted .... is there anyway to adjust this in iMovie? I've turned down the sound level, but of course this doesn't help much with the distortion.
Thanks!
JC

XLR feeds have - to my knowledge - a much higher signal then the average, consumer line-out…
most consumer cameras don't have a "from tape/behind tapehead" audio control; it doesn't play while recording what's on tape, but just the input. this way, you can NOT control the final result… for sure, the XLR signal was fine… but too much for your camera… next time, you need to make a short test-recording, rew, then play + listen.
in QTpro, you have access to the 4 (6?) audio tracks, which are included in a dv-stream… apple-j/audio/track selection allows to play around with seperate tracks, with a very little chance, you could lower the distorted tracks and "find" a less distorted one (as from mic)… but, as said, very little chance…
no "restauration" known to repair "over exposure" in audio, sorry :-/
as Mathew wrote: try to get another recording, many mixers tape for themselve a copy…

How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments.

Is there a simple sound level meter for iTunes for windows ?

I'm trying to check the sound level of my music in iTunes and was wondering if there is a simple sound level meter plug-in for iTunes out there.

HKO,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

MSI KT3 Ultra2 very low record level 2

i speak spanish, sorry.
well, i have an MSI KT3 Ultra2 MS-6380E, but, the level of record y very low, with diferents michrofone, i know of computer, but i can´t have aceptable record, and when tild MIC BOOST the noise can´t use messenger by my modem transmit every time. I have microfone genius.
your "mic boost option" insert noise?, (with microfone disconected )
¿chasis need ground conected? (i have not conected)
¿the mother is damaged?
¿i need an special michrofone?
¿ is noise of ventilator?
thank you very much
Walter
Argentina
Athlon XP 1800+, 256mb PC2700
MSI KT3 Ultra 2 6380-E AC97 Audio
Maxtor 40gb 7200 Rpm DiamondPlus D740X ata 133 8,5ms
Abit Siluro Geforce 4 MX440, DVD PIONER 16X,
450watt Power Supply

Did you mean you can't record a voice at a audible level ?

Profire 2626 rear inputs VERY low levels

Several months ago purchased a MACBook Pro + Profire 2626 Audio interface to complete my digital home recording project. Initially spent my spare time getting familiar with the setup & made some attempts to record a basic track, with NO success.
Now I've got a bit more time & started to really focus on recording my first project, ALL attempts to far...No success.
The primary root of my problem is the rear Audio recording levels...are very LOW, on a scale of 10, levels = .5, I've turned up all levels on the audio interface + mixer dials. Routing Analog 1/2 = 7/8. 2 x Front input levels seems fine.
I'm a musisician + fairly computer savvy, recording is new to me. however, this has totally mistified me. Reviewed several forum posting but did not see any obvious solution.
Several forum posting's point to the Profire 2626 Audio interface. I'm confident a savvy & experineced recording artist has a solution. Any assistance would be gretaly appreciated..
Components spec's:
MACBook Pro
- 2.66ghz
- 4GB RAm
- OS= 10.6.8
Logic Express 9
-9.1.5 (1700.9) 32bit
M-Audio Profire 2626
-Firmware: 1.0.10
-Software: 2.3.1.

Hi.
I have had input level problems ever since I bought my iO 26 interface too with Logic Express 9. Here are 2 things I do which might help you. In Inserts go to EQ, Channel-EQ has a Master Gain on the left. I raise it to what I need. Another way I do it is to pull up Gain in Utility and raise the volume there. There might be a better way to do it but I have not found it. I hope this helps.
W.W.

IPod app sound level in multitasking is very low, is there a solution

Similar Messages

Maybe you are looking for