Ipod apple USB driver

Hi,
just got my new 160gb classic, trying to install it and as soon as my pc recognises it, it says that "Ther was a problem installing the following driver: Apple IPIOD USB driver. An error occured during the installation of the device. The system cannot find the file specified".
Anyone got any ideas on how to solve this problem ?? I have the upto date ITUNES, and i used to have two IPOD minis which work fine ! I also have this problem with one of the new IPOD nanos.
Any help i would appreciate !
Cheers

I'm not sure if this page is exactly what you are after but it might be worth having a look at: iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

Similar Messages

Ipod Nano USB driver fails continuosly

Initial problem: Device not found; located error in USB driver, uninstalled driver, rebooted sytem, found new driver - installed properly able to sync. (No hidden drivers listed in que) unconnect/reconnect ipod and USB driver error returns.(Each time)
Background services running are: Yahoo ISM, winamp, InCD, HP monitor, ATT self support, Logitech quick cam, McAfee, Index search.
Any known reasons why USB driver would continue to fail from dormant state? (unconnected and plugging in)

Make sure you have no other USB drives connected to your computer when connecting your iPod. I have a 4th gen Nano which fails to connect up when I connect it to my other Vista-based PC only if my USB hard disk is connected up.
I need to disconnect my external USB hard drive in Vista to get it to "see" the iPod. Also, might be handy to disconnect other USB devices like printers and your Logitech camera (which I have also connected, but that doesn't have any problem).

HT201269 how to download apple usb driver for windows 7 32 bit

how to download apple usb driver for windows 7 32 bit

Try this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then install this:
http://support.apple.com/kb/dl1614
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

Apple usb driver not supporting

HI guyz, while updating iphone 4 my laptop usb driver gets disturbed so it is not able install the apple usb driver support and itune is not able to recognize the iphone and when install the driver it gets failed. due to which my phone is in autorecovery mode and its not functioning. when i plug my phone to the laptop its charging but dnt hav any software in it.
please help me out..
my laptop operating system is windows ultimate 7..

Hey pnce,
Thanks for using Apple Support Communities.
If you're having issues installing iTunes, try this article.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

My computer only recognizes the my iPhone 4 as a camera. The Apple USB Driver isn't listed either. Help

The Apple USB Driver isn't listed either. I checked if an update would help, it didn't. It has been like this since yesterday.

Thanks! It actually worked . I had uninstalled iTunes but not the drivers, and it didn't work but perfect! Now I can actuallty do stuff.

HT1386 APPLE USB DRIVER NOT INSTALLED

Hi
if anyone can help me with how to install the apple usb driver for windows 8.1

That driver is installed as part of iTunes. did you install iTunes

TS1538 windows xp not recognizing iphone - apple usb driver not in list

I have followed all the troubleshooting steps in TS1538. I have uninstalled everything associated with apple and reinstalled the latest version of itunes at least 10 times. I have tried and tried and tried to figure out how to get the Apple Mobile Device USB Driver to show up in the device manager list with no luck. Everything else appears to be as it should according to all the troubleshooting steps with the exception that the USB driver will not show up in the list. I've tried taking a screenshot and getting the computer to recognize it as a camera without luck. I've tried using a different apple iphone, and ipad and an ipod with no luck. I've taken my phone and cable to another computer and it works perfectly. There is something preventing itunes from installing the usb driver on my computer. This is my work computer that I need to sync with to keep my contacts and appointments synced. Please help!!! I have disabled everything I can including software, antivirus and all peripherals without any luck. I am running winXP service pack 3 and itunes v. 10.7.0.21.
This has worked great for the last 2 years and then stopped working about 3 weeks ago and I have been trying to fix it off and on since then. Any and all help is appreciated. It started when I was trying to get my sons locked iphone 3G to sync with my computer and it wouldn't show up. That was the last thing to sync with this computer and nothing has worked since. I am confident that I've eliminated all the variables that I could.
Thank you for you time and effort.
Chad

Maybe a Microsoft Update broke the driver? Or an update to your security software? Have you rebooted your computer? Have you tried disabling your antivirus and firewall? Have you tried removing and reinstalling iTunes?

I've bought an Apple USB drive, can I use this to load DVD's onto my computer so I only need to take the laptop on holiday with me rather than the USB drive and dvd's?

I've bought one of the Apple USB Superdrives thinking I could use it to load DVD's and save them onto my macbook pro, can anyone confirm if I can or can't do this?
If I can how do I do it?

DtheG13 wrote:
Ok so any chance you could explain to me exactly what I need to do as I am absolutely clueless! I have a pile of DVD's, the USB superdrive and I've just downloaded the Handbrake software. When I put the DVD into the superdrive it starts playing, how do I get the series onto my computer?
If you haven't done this before, there are a few things you need to know. Sorry to say that this is not yet a simple, straightforward process like it is for music CDs. It helps to be a little geeky. You will need to make some choice about file format and file size if there is any chance that the imported discs will take up more space than you have available on your hard drive. If you are willing to learn, you should read the Handbrake User Guide and other articles on the Web about importing DVDs.
If you think this is starting to look complicated and you don't have time to figure it out before the trip, it might be easier to just bring the discs.
I have found that Handbrake can't import every disc. I think Mac DVD Ripper Pro is a much easier program to use, and it will import almost any DVD pretty reliably, but it costs money. For me it is worth it.
No matter which way you do it, it is going to take a lot of time to import a bunch of discs. It is going to take a lot more time than importing music CDs.

Plugging in iPod dismounts USB drive-Finder copy

I have 3 USB and 8 FireWire drives in addition to 3 internal drive connected to my Mac Pro. I am running OS X 10.5.2 and when I plug in my iPod classic (160 GB), one of my USB drives dismounts. This happened when I was copying a large amount of data from that drive to another drive. I got the dismount dialog, and the Finder copy progress bar dialog is still left on the screen.
Also, I have never been able to cancel a Finder copy under Leopard successfully. I always have to end up force quitting the Finder.

That's a lot of drives... probably too many.
Is that drive that dismounts on a hub with the iPod? Is it bus-powered (takes power from the hub)? If so, my guess is that the iPod initially takes more power than the hub has left, and that causes loss of connection to the USB drive.
I would keep most of those external drives disconnect and plug them in only when needed. Doing so will make your Mac run faster. And that Finder copy progress bar issue may go away as well.

IPhone or iPod as USB drive

Is it really true that you can't use an iPhone or current release iPod as a USB storage device? I have been happily using my first generation iPod Nano for storage, and thought that this facility would continue to be available on new models like the iPhone.

The current iPod classic, iPod nano, and iPod shuffle models support their use as external USB drives. The iPhone and iPod touch currently do not.
(26864)

IPod as USB drive

I am trying to use my iPod as a USB drive and a part on iTunes on my Win XP Pro system. The iTunes is working fine and the USB works on other Win XP Pro systems. Any ideas. Thanks.

Do you want to know how to enable it a sa disk drive?
iTunes prefs -> iPod.
Check Enable Disk Use.

TS3430 Apple usb driver error code 19 - How do I rectify?

My iPhone 5 does not connect with my laptop; it was working fine. I have a usb driver error code 19. how do I fix this?

Well, Apple's Support site states that "error 19" refers to:
19
dsNoPk2
package 2 not present [Disk Initialization]
So since the hard drive is unable to initialize, the implication is that the hard drive has failed, and your computer's symptoms tend to confirm this. I'm afraid its time to take the computer in for diagnosis and repair at this point.

Unabe to update Apple USB driver on windows PC

whie updating the driver i got foolowing msg
Window found driver software fro your device but encountered an error while attempting to install it
Access is Denied

Hey brinda07!,
Thanks for using Apple Support Communities.
It looks like you are having a problem with a driver. You can follow this article and see if you are able to get the driver reinstalled. Also make sure you are signed into an administrator account.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Verify that the Apple Mobile Device USB Driver is installe
For Windows XP
For Windows Vista, Windows 7, and Windows 8
If the Apple Mobile Device USB Driver is not listed
If the device is not recognized while in Recovery Mode
Have a nice day,
Mario

Bootcamp Blue Screen of Death.. Apple USB Driver ?

This started to occur to me after I upgraded to the Leopard
drivers for Bootcamp.
I have seen this occur two times while booted in Windows XP.
Both after I left the machine idle for a long period of time..
about 3-4 hrs.
1) Conditions - machine is idle.. the screen energy saver is on
and the monitor is in low power/sleep mode.
2) Conditions - both times occured when i had no internet access
connected. It occured when I took my imac to a location where
i dont have the wifi access as usual at my home.
3) Conditions - i did have the trial of Parallels 3.0 installed
but i dont use it nor did i purchase the full version.. i need
to uninstall those components from XP still.
4) I think in both instances Autodesk Inventor 11 was running.
The 2nd time it was, i dont remember the first time this crash happened.
I have installed all the latest service packs of this software on
the system.
5) Windows XP SP2, FAT32 partition, 32 GB on my iMac harddisk.
6) Error - Windows Blue Screen of Death... i caught it only momentarily
as the machine goes into automatic reboot. I did catch USB DRIVER
in the most recent crash.
7) Error - Upon reboot, the machine asks to send the error report
to Micosoft. I cant because I dont have an internet access. It did
say that Windows rebooted due to a serious error and asked to send
the info back to MS.
8) Error - i was able to screen shot a bit of the error report
but i cant attach a jpeg of the window to this post unfortunately.
Any insight would be appreciated on this.
Edgar

okay.. i have recreated this hard crash for a third time:
it is definitely the USB Drivers used... blue screen of death states:
BUGCODE_USB DRIVER
other notes:
i had no other applications running when the system crashed this third time.
Power Settings (from Win control panel):
Turn off monitor: after 3 min
Turn off HDs: after 1 hr
System standby: after 1 hr
System hibernate: after 2 hrs

SBBoD when iPod or USB drive connected

Hi –
I've noticed a new problem with my mac recently.
When my iPod shuffle or USB flash drive is connected, the computer hangs for a few seconds. (displaying the SBBoD when the mouse is above any application)
The behaviour is similar to what occurs when the OS tries to read or write a bad file on the boot drive, but the only thing that gets written to system.log is "kernel[0]: USBF: 2156845. 75 [0x3d6d200] (Reset) USB Generic Hub @ 2 (0x4b200000)"
The only sources I can think of for the problem are the two new USB device I got around Christmas time: an iPod shuffle and a TI-84 graphing calculator. I haven't noticed the problem in other accounts on this machine, but other users don't use USB storage devices that often so I can't be sure. My external USB hard drive mounts instantly and without any problems.
Thanks.

I guess it fixed itself; I'm not having any problems any more.

Ipod apple USB driver

Similar Messages

Maybe you are looking for