IPod AV Cable with PB 15"?

Does an iPod AV cable work with a PB 15" ti, as far as transmitting the sound to a stereo system. It looks like they both have the same headphone jack. So, I guess it would work... but would it sound good?

You were doing alright until you said you switch cables Red and Yellow.. Mistake.
If your cables are Apple or IPOD compatible then read the following the advice I gave to another post.
First make sure that your Video/output cables are compatible with the IPOD.
Then make sure you IPOD have the correct Video setting output.
TV= ON; Signal = NTSC and if your using HDTV set use Widescreen is ON.; Off will should work as well.
When you connect to TV make sure the Color Cable connection are correct.
Yellow is Video has to connect to Yellow; it’s not optional!
Then Match your Audio (left) White and (Right) Red cables
Check your IPOD Video setting!
Make sure the Video setting equals TV output ON.
The output should work like any other standard Video
and Audio circuit.
Then configure TV set for IPOD Input.
Compaq PC 6370US / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

Similar Messages

IPod Connector Cord with iPhone 3G

Hi, I have an Video iPod 5G and want to know if I can use the USB to iPod dock connector cord that came with it with the iPhone 3G
Thanks

Yes, it should work. I also am using my iPod 5G cable with my new iPhone and it syncs and charges just fine with both my computers (iMac and MBP). I keep the cable that came with the iPhone plugged into the AC adapter to charge it elsewhere.
-Karen in AZ-

Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
-Kingofbytes

Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
Her 30GB = v1.2.1
My 80GB = 1.0.2
Mine is newer by about 6 months. Both are the latest software according to the screen.
Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

My ipod touch is stuck on a screen that shows a picture of the USB cable with an arrow to "itunes" and pic. of a CD with a music note over it....what do I do?

My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??

Connect it to iTunes and restore it.
B-rock

My Ipod touch is frozen. Shows USB cable with arrow pointing to Itunes. What is the problem? This is the second one I have had that has done this!

My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!

This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

40GB iPod Photo came with FW cable, doesn't work with FW cable

I have a 40GB iPod photo that I love. I bought another (used) one for my wife, being careful to get the identical model so we could share things such as docks, cables, etc.
Her iPod works fine with the USB cable, but will only charge with the FW cable -- no computer can see her iPod through FW. I've reset the iPod, updated it with the iPod updater, but nothing. When I connect her iPod to any of my Macs (her 12" iBook, my 12" PowerBook, my G5 iMac) with FW, the iPod appears to be charging, but is not detected by the computer, nor are any of the iPod controls usable. It doesn't go to the "do not disconnect" screen, but simply freezes where it is until the FW cable is disconnected.
Specifics: both iPod Photos are the 40GB model M9585LL, version 1.2.1. The 2nd one CAME WITH a FW cable, which is why I'm puzzled that it won't work with it. Help?

Here is some info for the pinout for the iPod.
http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
You need to find the pinout of the camera cable you have.
Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
Usually, you simply have to swap the Red and the Yellow for it to work properly.

I purchased an used iPod nano 4th with many many songs on it,but when i hooked the usb cable to try and change the name,something went wrong.i had to reset it,thinking my music would still be there,but i lost everything! Is there any way to get these back

I purchased an used iPod Nano 4th.with many,many,many songs and albums on it,but when i plugged the usb cable into my laptop(i am a new comer to computer) i thought i was changing the name and thought i was syncing but something went wrong and everything was gone! is there any way possible to get these back? Please I need Help!!! Thank you!

Was the music purchased via your iTunes account and/or did you buy it from other sources or copy it from your own CDs, or did the music belong to the previous owner ? If the music was yours then you can sync it back to the iPod via your computer's iTunes. If the music is not still on your computer then have you got a backup of it ? If not then for iTunes purchases you might be able to re-download it depending on which country you are in. If the music was put on the iPod by the previous owner then you will need to buy your own copies of it.

IPhone showing on TV with iPod AV Cable?

Hi. I bought the iPod AV Cable and was told it work with the iPhone.
I can't get the slide show to show up on the TV.
Does the iPod AV Cable work with the iPhone or should I return the cable?
Thanks!

Go ahead and return the iPod AV cable, it won't work with the iPhone. It only works with the iPod with color display and iPod Video.

HT1454 Is it possible to play games and using apps using Component or Composite cables with ipod touch 4g?

Is it possible to play games and using apps on TV using Component or Composite cables with ipod touch 4g?
Or using universal dock?
Or this is only for video?

The iPod only displays TV out for apps that support TV out. The App description will say if it supports TV out.

I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack. The problem is that the sound is extremely muffled and bass-heavy, with little treble.

I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack. The problem is that the sound is extremely muffled and bass-heavy, with little treble. I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable. Is there a setting on either the iPod or the stereo that I need to change in order to fix this?

The phono input is for a phonograph. The iPod does headphne output is not that same as a phongraph output. Does th stero have an AUX input? That should be compatible.

Can I use the iPod Nano cable and AC power supply with the iPhone?

Just purchased my iPhone 3G. Phone was in my pocket and the AT&T clerk neglected to put the box with the computer cable in the bag with the other accessories.
Until I can pick it up, can I use my iPod Nano cable? The plug seems the same size but I don't want to break anything.
Also, there was no power supply in the box due to the recall. Can I use the iPod AC power supply I bought for the iPod? It is the white brick about 3" by 3" by 1" with a USB socket in the side.
Thank you for helping me with my start-up glitches.

Ps. When you do get the accessories, look for a green dot (on the side where the prongs of the plug come out). If there, fine; if not, your adapter is subject to the recently announced recall of ultracompact USB adapters.

Using audio cable with iPod

When I got my iPod, I bought a kit of accessories that included an AV cable, and audio only cable, etc. Since I have some yoga exercise videos on my iPod, I use the AV cable to connect the iPod to my TV so that I can do the practice. I've also done this for audio-only yoga practices by just connecting the audio plug of the AV cable (ie, instead of using both the audio and visual plugs).
So, what I'm not sure how to use is the audio-only cable. The one I have has plugs on either end that are identical, both with headphone symbols. So, yesterday I tried plugging one into my iPod, one into my stereo's headphone jack--it fit, but this didn't work, even when I turned my stereo to the AUX setting. Is it even possible for the stereo headphone jack to receive input coming in? Am I doing something wrong?
I'm sure this is a dumb question, but I'd appreciate any input!

Ya, going from headphone jack to headphone jack will not work as both are outputs.
The audio only cable is really made for things like car stereos that have a aux input jack of that type. For the home stereo you typically have RCA jacks (the red, yellow, and white style ones).
You can buy a cable with the 1/8" iPod headphone plug on one end and a pair of (red & white) RCA jacks on the other and use that, but you might as well just use the A/V cable you have an ignore the yellow RCA plug when using it for audio only.
Patrick

Can I use my iPod Nano 2G USB connection cable with iPad 2?

The connection cable for my iPod Nano 2G looks almost the same as the connection cable for my iPad 2, the only obvious difference being that the iPod cable has a bigger plug with press-in release buttons.
Is it possible to use either cable with either device, or is each cable device-specific?
TIA

You should be able to use this cable without any problems.

IPod AV Cable with PB 15"?

Similar Messages

Maybe you are looking for