Ipod battery drain and overheat

Hi, I have a third gen Ipod 32 gb, and it heats up very fast and its battery drains within an hour. I have shut down all background applications, and backed it up TWICE. I have also recently updated the software to iOS 5.0.1. I also own an Iphone 3GS and an Iphone 4, but no such problems occur at all. I have had the Ipod for a year or two, and am only noticing problems now. There is also a problem with some applications which will not download. They stay on the loading screen, with the bar where the name of the app should be. The bar does not move, and it is like this for almost 50 of the apps on the Ipod. there is also an app that has not loaded for a long time, and asks continuously and annoyingly for another users password, who logged onto Itunes to download it, then logged off. What to do??? PS: not relevant but maybe, I use a laptop PC (not a mac) to back up via Itunes, and have not jailbroken or messed with the ipod in any way.

I would try the standardfixes to rule out a software problem:
- Reset. Nothings will be lost.
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Restore from Backup
- Restore to factory defaults/new iPod.
If you still have a problem it is likely due to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • Macbook Pro battery drained and now it won't turn on

    I have an early 2012 Macbook Pro. A couple of weeks ago my charger broke and I couldn't get a new one straight away, so the battery drained and it shut off. I don't normally let that happen, but there wasn't a whole lot I could do about it this time. I have a new magsafe charger now and the LED is solid orange as normal, but the macbook still wont turn on even though it's been charging for a good 50 minutes now. It sounded like it was booting up a couple of times and the first time the screen lit up grey and the loading animation (grey bars) showed up, but now it's just black again. I know it's going to take longer than normal to charge after the battery being completely drained for so long, but is it normal for it to take so long or does it sound like it's bolloxed?

    Try a SMC reset:
    http://support.apple.com/en-us/ht3964
    If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
    Ciao.

  • Iphone 4 overheated, battery drained and now wont take a charge?, iphone 4 overheated, battery drained and now wont take a charge?

    ANy suggestions, iPhone 4 over heated , battery drained and now wont switch on - it does appear to be charging. Any help appreciated

    Left it for an hour or so then took it off charge to cool down - should I leave it charging?

  • IPod touch 5th generation battery drained and restored after app is closed

    I got my iPod Touch 5th generation about a year ago. I noticed it has since had an issue on the battery life that I thought was common so I did not do anything about it.
    The issue my iPod has is that whenever I use an app that requires immense energy to function, the battery drains real quick. But after I closed the app, the battery life fills up again like it has only used a little.  Video recording especially drains the battery the most where after 10 minutes of recording, it pops up saying 20% battery left from fully charged and at one point it even shuts down itself. But when it was turned on, the battery life is still around 75%. Before it runs on iOS 8, the issue is more apparent although it still exist now with the latest update.
    I did not know until just recently that I found out it is a big issue where I could not have a video recording that can last longer than 10 minutes or so. Is there anything I could do to solve this? Are there anyone else out there that has this sort of issue?

    Hey Leowjowee-
    I'm really sorry if I'm about to state the obvious, but have you tried fully resetting the iPod touch and setting it up like it's brand new?
    It's a crappy answer, but sometimes these are device specific issues, and other times, it can happen just because the kinks haven't been worked out of a new upgrade. I work in consumer IT, and the first thing I would suggest to a client with this issue (especially after an upgrade from one version of the operating system to another), would be to restore (reset the iPod to factory specs) the iPod touch, set it up like the day I bought it, only with the upgraded operating system, and see if there's still an issue. Sometimes, doing an upgrade like you probably did to get from iOS 7 to iOS 8, where it keeps all your previous settings from the last operating system, can cause bugs in the new code.
    Here's instructions for a reset: http://support.apple.com/en-us/HT201252
    Keep in mind that this will completely erase any content you have on the iPod touch, so be careful to make sure you have a backup of the device before you do anything. You can back up your device to iCloud or your computer with these instructions:  http://support.apple.com/en-us/HT203977
    iOS 8 is brand new, and I'm sure Apple is working out the bugs - but these things happen...

  • My laptop drains my IPOD battery now and won't sync! (Vista!?)

    OK. Here's what happened. I have an old IPOD classic - the U2 edition. Anyway, I recently got rid of my XP desktop in favor of a new Vista laptop and I successfully transferred over my Itunes library onto it and synced my Ipod with this library.
    Everything was working fine, my Ipod was syncing and charging on it for a while until recently.
    Now when I plug it in to any of the USB ports, Vista will not even recognize it or find it. Even crazier, my Ipod acts like it's charging and shows that it's plugged in and charging - but instead of charging, the USB port drains the battery till I get a low battery or lightning bolt on my Ipod display. (My Ipod will charge on other computers.) I've never seen or heard anything like this!?
    I tried creating a separate User account and installing Itunes and drivers again on separate account to see if it would correct issue, but no luck. I don't want to do clean VISTA install.
    Anyone have any idea what is going on here??
    Thanks in advance!

    Figured out my issue. Went into Control Panel and found my Ipod listed as USB Composite device. It was disabled. Re-enabled it and now it's back to working.
    Still, wondering though why my laptop drained the battery instead of charging it when it was disabled.

  • Ipod touch 2g not used for months, battery drained and taking way too long to charge

    I had an ipod touch 2g that got wet a couple of months ago. They were inside a jacket pocket when the rain started pouring. After that, the screen only turn white when turned on. I just had the LCD replaced, but since i havent used it in months, the battery has been drained. I plugged it into my PC to charge for a couple of hours already, but its still not enough. The lowbatt icon is there, but iTunes still doesnt recognize it despite being plugged in for a few hours already.
    Does it really take this long to charge an ipod touch that has been completely drained and not used for months? I'm worried there might be other problems besides the LCD when it got wet before. Should I have it checked again for battery charging problems? Or am i just being impatient?

    I tried charging it through the adapter, still got the same problem. So i had it checked again and the battery apparently also needed to be replaced. Haven't had any problems with it since then!

  • Firewire works great, but ipod battery drains?

    I've been having lots of problems for a while with the error -36 situation. i finally decided to get the adaptec 1394 firewire card for notebooks and my problem has been solved. i am extremely happy about this.
    however, i've noticed that since i've been connecting the ipod via firewire, the ipod's battery drains dramatically when connected. i had it over halfway charged, and after a couple of hours of being connected, it got completely drained. is this normal? thanks for any help.

    I don't have a problem with the fact that it doesn't charge. i'm just wondering if it is normal that the battery drains so quickly. is it the constant transferring of data that makes the drain so fast?

  • Old iPod battery drains on plugin w/USB

    I've got a pretty old 20GB iPod that I only use at home, plugged into my Bose. The battery only lasts a couple hours on its own, but for some reason, whenever I plug it into my USB cable, it dies almost immediately with a drained battery.
    I know that I can't charge this old model with a USB cable, but it should have enough battery power to update my playlists. But it dies almost immediately.
    To make things more complicated: it updates sometimes, but very rarely. When it does, the battery drains very quickly (I get about 10 minutes tops). Lately, though, I can't even do that. Any ideas or suggestions? I'm hoping this thing isn't ready for the trashcan yet. Is there a different cable I could use? Would it be worth the money to replace the battery? Is the battery even the problem?
    iMac G5 Mac OS X (10.4.7)
    iMac G5   Mac OS X (10.4.7)  

    Well, I solved the problem for myself, and it was pretty silly I suppose. I'd forgotten that this older iPod came with a Firewire cable, not USB. I managed to track down the original cable, and now it uploads just fine with that. The USB worked, but only sporadically. So far, the Firewire has been smooth.
    iMac G5 Mac OS X (10.4.7)

  • 10.5.6 Update breaks USB Keyboard causes iPod Battery Drain when sleeping.

    I just recently installed 10.5.6 via automatic updates. I normally connect my iPod touch to my iMac via the keyboard Left USB port. I put my computer asleep at night. When I wake up my iMac in the morning my iPod is totally drained of its power over night. When I placed the iMac asleep in the evening the iPod battery was full. It seems the update broke the USB ports on the keyboard. To test this theory I tested keyboard on all three ports on the iMac by moving my keyboard connection. The iPod touch drained connected to the keyboard on all three ports. If I place my iPod on the USB port by itself it does not happen. It only happens when it is connected to the keyboard.
    So far I have downloaded the full install of 10.5.6 and installed it. I also did the little voodoo of fixing permissions but still the same results. If I use the USB port on my keyboard my iPod will drain of all of its power in 6 to 8 hours when I place my computer a sleep. If I connect my iPod directly to USB port and put my computer asleep the iPod does not loose power and will be charged in the morning.
    Not only does the keyboard not charge the iPod when it sleeps it drains the power from the iPod.
    This did not happen before my update to 10.5.6.
    Does anyone have any ideas? Is this happening to anyone else?
    Thank you for your help.

    I opened a service call with Apple on this keyboard problem. I was shipped a new keyboard, reverted my computer to 10.5.5, went to the apple store to work with a Genius and worked with online support. Finally after weeks of going back and forth I received and answer from Apple Engineers. It seems the engineers “verified that the behavior for power handling has been changed” in 10.5.6. “resulting in the issue you've been reporting”. They also now “verified that the issue your reporting is correct behavior under this improved handling system”. They suggest to plug devices directly into the USB port when my iPod Touch is directly attached to my computer. I think I will just have to get a USB hub. It is a shame Apple had to waist money sending me a new keyboard. It is also a shame I had to revert my iMac to a 10.5.5 before the engineers took the time to look at the problem I was having. If the send level support engineers took the time to look into the problem the call could have been solved in 24 hours.

  • 3g iPod battery life and hard drive head...

    Hi all!
    I have a 3G 20GB iPod, and sometimes the battery drains itself out even with a brand new battery and the iPod being shut off.
    I can barely get 4-5 hours of playing time, no backlight, equaliser, and no songs skipping.
    I found out that you can hear the head of the hard disk moving even when the iPod is turned off. One of my relative has a 3G 15GB iPod and she's experiencing the exact same problem of battery life, and her iPod's hard drive make's the exact same noise. And she also has a brand new battery.
    So can you listen to your iPod, (even between times when the iPod has stored the data to it's RAM the head of the hard drive is still making some kind of movement) and tell me what you think.
    I've tried to install all previous versions of iPod software to no avail.
    For now I have completely erased the drive with "zero all" along with a surface test by Tech Tool Pro, and it seems to have made a difference.
    Time will tell, post your observations and I will keep you posted.
    QuickSilver 933   Mac OS X (10.4.8)  

    MrSpike wrote:
    The largest detractors for battery life are the obvious ones like backlight usage, anything that makes the HDD seek (FFW, skip track, etc...) using EQ, and volume. There are many other areas but most are pretty minor. Alot of it actually depends on the chip that regulates energy to the player. Supposedly we will be seeing new chips that double or triple battery life on these mp3 players in the near future but we shall see.
    Hard disk is by far the biggest user, backlight uses some (but you wouldn't have the backlight on, and it's not good for the life of the EL panel either). EQ seems to have issues on some players where it uses far too much power in my opinion, specifically the Smart Volume function. I hope Creative can address the power demands of this if possible. Creative managed to double the base battery life of the Touch with the changes they made in some of the hardware, so greater li'ves are definitely achievable.
    Rich_T: I've used your excellent test data as the start of a battery curve graph I'm putting together. I'm taking Creative's benchmark data and anything else I see to try and create curves for the players under different circumstances. I think once we have a base curve for one circumstance we can probably extrapolate it to all the other players, at least as a guess.
    If anyone at Creative has any battery life figures for different scenarios (which I would be amazed if they didn't) it would be very useful

  • Battery drained and will not charge

    the battery on my droid ultra completely drained last night and I plugged it in to the wall charger this morning and it is not responding. Has anyone let their battery drain all the way ans had issues getting it to charge? It has been plugged in for about 30 minutes and the screen is black and the device will  not turn on.
    thanks!

        ddvh, let's bring life back to that device. I recommend that you allow it to charge for approximately 15 more minutes until the battery charging icon populates on your screen. If the device still does not power on, you will need to press/hold the power and volume up button to reboot your device. Keep us posted. We're here to further assist you if needed.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • Iphone5 battery drained and wont open

    I just bought the iphone 5 last year and it was so good everything runs so fine. Until i upgraded the software to IOS 7 , i started having problems on charging , battery drained too fast and it wont open anymore. The most irritating was when the battery left uncharge or drained, it wont open nor charge anymore. I've tried using different original cable charger but it wont work.  I'm so ****** with this phone.

    Try removing the battery to try and reboot the device. It's possible that something else went wrong with the device. If that doesn't work I would contact your wireless service provider.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • New ipod, battery low and it makes noise, like a wheel spinning inside

    I tried to charge the battery for several hours. then tried to register ipod on computer. did not get past the fromatting screen. then followed directions to reset. it did not work., went back to low battery on screen.
    I'm afraid to leave it plugged in to charge the battery any longer...withoug some help first. What am I doing wrong?
    compact n800c   Windows XP Pro  

    I'm having the same problem with my new 80 gb iPod video. It was playing songs fine for a few days and then one day this week it just froze in the middle of a song and started having the same problems that you described. I've created an iPod repair request and after one day have still not received a response.

  • HELP! Battery drained and now, even with a power plug, computer won't start

    My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
    Anyone encounter this before after a full battery drain? It's very odd.

    I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
    Wayne

  • Battery drain and error in event log!!!

    So I recently got a curve 9360, but battery life wasn't the 1 and a half days I expected. Doesn't last more than 5 hrs on normal use, and it falls drastically when doing slightly heavy work like now, bridged to my PlayBook like now, it turns of radio at about 30% then blacks out in under 5 minutes. So i did some digging around and most people said it was the OS, so I downloaded the os that most people say fixed there curve's, got a response for 7.1.0.190 and 7.1.0.258, bug still no difference. Out of curiosity I checked my event long and found this error ,
    Name: System
    Severity: Error
    GUID: 97c9f5f641d25e5f
    Time: "the date and time shown"
    JVM:INFOp=mypin,a='7.1.0.190',o='9.6.0.24',h=e001507
    So when I changed the os to 7.1.0.190, still got the same error and it's always at the top of the event log so am guess its what's causing the battery drain. Changed batteries, and wiped the OS and reinstalled but no solution. 
    Any help people!

    Hi,
    The Certificate Chain you installed on the FE server did not have "Enable all purposes for this certificat" enabled.
    Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the certificate chain you installed--Properties--General, check the "Enable all purposes for this certificate".
    Restart Lync FE server and check the problem is solved.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Display last month revenue

    Hi All, I have below requirement. i have data in my table as below. Month Name Revenue Jan-2013 500 Feb-2013 300 Mar-2013 null April-2013 null May-2013 900 Jun-2013 null Jul-2013 450 Aug-2013 null requirement is to display last month revenue where ev

  • In Leopard, My Local Junk mailbox has Disappeared--How do I  get it back?

    I cannot find my junk mail folder anywhere and sometimes I need to get something from it. Also if I ask Leopard to just show it in the inbox, it does not do so. Ideas much appreciated.

  • Drill down in new window (pop up)

    Hi all,        I am having one column chart. when drill down the column chart. one more chart will display. is it possible to open the drill down chart in new window(pop up).       how to achieve this Regards, Shanthakumar.

  • Password protecting a networked printer

    Hello, here's the situation. My family has a networked printer (Brother 402cn) that's shared via a linksys 802.11g router with three computers (iMac G5, PB and Toshiba). The iMac is the main computer and I would like to password protect the printer s

  • Problem in Installing PetStore 1.3

    Dears, I am facing problem in installing petstore following is my console's out put.Please advise. I am following the same instructions provided in the docs. E:\j2sdkee1.2.1\public_html\petstore1.3>setup Buildfile: setup.xml init: help: [echo] Before