IPod Battery/Power Trouble...Please Help

I have had my iPod for about 3 years (so it's like a 2nd or 3rd gen.) anyway, when I have it connected to the power adapter it will turn on. But when I unplug the power cord or try to connect it to my computer it will not turn on. I have charged it overnight and it doesn't show up as being completely charged. I have reset it and still no power. Any ideas?
Dell   Windows XP  
Dell   Windows XP  

Apple will exchange your iPod for a refurbished one for $79. They do not fix yours.
Apple - iPod Repair price                       
A third-party place like the following will replce yur bttery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a replacement battery for aboutn $10
iPod Touch Repair – iFixit                  

Similar Messages

  • Low or no ipod battery power

    A few years ago the battery power became fickle in colder weather. Now it has progressed to whenever I disconnect it from its dock station to either play it or add more songs to it, it either stops playing and or does not load songs with this message: "No Battery Power Remains Please connect Ipod to power". Has anyone else had this problem and if so, how do I fix it? Is it time for a new batter power purchase? Or is there a way to add songs without disconnecting from its docking station?

    I believe it is time for a new Ipod/ battery. Apple wont replace any internal parts but will send you a new/ refurbished ipod identical to yours for around $125. You will, however, need to reload all songs, pictures, etc. 3rd partry sites will sell you a new battery for around $100 but most require you to install it yourself. Opening the Case will void the warranty. Which brings up another good point: if you still have a warranty (1 year from Apple, possible store/ credit card extension) use it. Your final option is to give your ipod to an apple store where they will recycle it for you and give you a 10% discount on a new Ipod of your chopice. hope this helps!! (this is what i have to do)

  • I kept my iphone on my table so with a half charged battery. I picked it up and it would not turn on then i charged it about an hour but still is not turning on.is it a battery problem? please help!

    i kept my iphone on my table so with a half charged battery. I picked it up and it would not turn on then i charged it about an hour but still is not turning on.is it a battery problem? please help!

    Press and hold both the home and power button until the apple symbol shows up, about 15 seconds.

  • I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • Hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

    hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

    Go to
    http://bt.custhelp.com/app/answers/detail/a_id/47531
    and follow the instructions
    This was put up by BT several months ago as part of the advance notification that the Yahoo service through them was closing

  • HT201263 My iPod touch 5th generation says: iPod is disabled, connect to iTunes. When I try to connect to iTunes it says: cannot connect, please put pass code in iPod... Please help!!!!

    My iPod touch 5th generation says: iPod is disabled, connect to iTunes. When I try to connect to iTunes it says: cannot connect, please put pass code in iPod... Please help!!!!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps..
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • IPod Nano troubles, please help

    I'll try to explain this problem to the best of my ability, this has been an ongoing problem since my sister got her iPod Nano:
    Me and my sister both got iPods for Christmas, her a Nano and myself a Video, now this isn't about me, my iPod works with my computer (thankfully), but my sister's Nano does not work with her computer. The only reason she has music is because she hooked it up to mine and got my music (a process so annoying to me it's hard to explain, and no, before it is suggested I am not going to add her music to my computer, add it to my library, hook up her Nano, give her her music, and then undo that whole process afterwards. Also I am going off to college next year and won't be able to do that all the time).
    Anyway, so the problem appears to be that Windows does not recognize her Nano. I follow the instructions exactly like I did to use my iPod, I install the newest software (iPod updater and iTunes) and then put music into iTunes and then plug in her Nano, and I get a very strange noise. If you can imagine the two noises commonly heard, two beeps, one low and one high when you plug in a piece of hardware, and one high and one low when you unplug it, think of this noise as three, very quick low beeps. I do not know what this noise means, but it appears to mean "we know you plugged something in, but we don't know what the heck to do." iTunes at this point does not automatically update the iPod, and when I go into iPod Updater, the message is "plug in an iPod to begin" (although one is plugged in).
    Originally I thought the problem was with her USB drives, although they are USB 2.0 as recommended. I called an Apple service representative (actually a few, only one giving me anything close to a reason for the problem), and upon checking the Device Manager the representative told me that "VIA" USB controllers are not compatible with the Nano. I did not find this likely, but I accepted it as the reason and she has since gone without an updated music selection in her Nano.
    Recently my sister purchased a PCI USB card to put into her computer, which I installed (with difficulty, hard to find the drivers). We again tried to use the Nano with no luck. These new USB controllers are "NEC PCI to USB Open Host Controllers" also 2.0, according to the packaging.
    I have since reinstalled iTunes and iPod Updater to their most recent versions and reinstalled the USB ports twice, with no better results. Currently I am at the Device Manager and it shows it "recognizes" the iPod, under "Other Devices" (which has a yellow question mark as the icon) and the iPod tab itself also has a yellow question mark as the icon, but this yellow question mark has a smaller yellow circle with an exclamation point ("!") inside it. I attempted to use the "Add New Hardware" wizard to "install" the iPod, but at the point where it looks for drivers it says it can't find any.
    Please help, I would be greatly appreciative of any information concerning:
    -My sister's USB ports and if they are the problem
    -What the "three beeps" noise means when I plug in the Nano
    -Where I can find "drivers" (if they exist) for the Nano so the computer recognizes it
    -Any other ideas/suggestions that could be of help
    Thanks in advance! I hope someone else out there can answer my problem!

    hiya!
    -Where I can find "drivers" (if they exist) for the Nano so the computer recognizes it
    hmmm. okay, perhaps we should try giving the techniques in this MarkJones post a try:
    http://discussions.apple.com/thread.jspa?messageID=1940779&#1940779
    with regard to the USB card compatibility issue, this document might be helpful:
    iPod: Recommended FireWire and USB Cards
    love, b

  • Major Ipod Trouble, Please Help

    Lately I've been going through a lot of frustration with my ipod. I just recently bought an imac intel core duo and through data DVDs and ipod access, managed to get all of my music, which had previously been scattered between two PCs and an ipod, in one place. In order to get it onto my ipod I had to restore the ipod and then synch it with my new computer's itunes, which was successful. Everything was going smoothly until recently it started freezing inexplicably. There doesn't seem to be any rhyme or reason other than that it seems to freeze a few seconds into a song and that it's just about always happened in my car when it's plugged into my FM modulator. Every time it's happened, the music disappears when I restart it, and doesn't reappear until I've restarted it several more times. I thought perhaps that restoring the ipod didn't fully update the software and created problems after it had been synched. But just recently when I plugged it into my computer, itunes said that it couldn't be read and that I should restore it to it's factory settings, which I had just recently done, and then when I ran ipod updater on it without itunes, it said that my ipod was up to date. I would just restore it or buy a new one but I just did restore it and this ipod is only a few months old and was sent to me as a replacement when my old ipod broke. Any insight would be appreciated

    im sorry i cant seem to start a new topic PLEASE HEEEEEEEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPPPPP
    all of a sudden about half an hr ago my computer froze & went all spastic. i retsarted & now ALL MY SONGS ARE GONE FROM MY IPOD!!! I HAD 10 000+ SONGS HOW DO I GET THEM BACK!?!?!??
    please tell me theres a way. when i check the ipod itself it says 0 songs 0 videos but strangely my 87 photos are still on there. also when i reconnect it to the computer it says to restore its factory settings but when i go to update/restoe it says i have 10GB left (its a 60Gb video ipod) so i think the songs are still stored there but i cant access them or something please help me!!

  • Trouble opening ipod users guide. PLEASE HELP.

    ive spent my entire christmas trying to find information for using my ipod nano. i am aware of the users guide but when i open it it does NOTHING. when i downloaded the guide after it had finished when i opened the file, it had originaly said i needed to pick a program to run the guide, so i chose itunes?..after that didnt work i tried opening it using internet explorer, microsoft word, notepad...everything!..nothing is working for me. im so confused. please please help me before i throw this nano AND my p.c..at my wall.
    much appreciated.

    If you are talking about the itunes user guide then it should open with the itunes itself. Else if you are reffering to Ipod features guide which is a PDF file you can open it simply by Adobe acrobat reader. If you dont have it then you can download it from www.adobe.com

  • Help my IPOD won't start PLEASE HELP

    It gives me the apple screen and then switches into the foloer with an exclamation point and i don't know how to get it out. I have tried restarting, and plugging it into the computer doesn't do anything. It is charged, please help.

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • NEW IPOD NANO NOT WORKING, PLEASE HELP

    Hi Guys,
    I have the large IPOD (4 YEARS OLD) and bought a 2nd Ipod Nano that's smaller for the gym. I plugged it into my MAC BOOK PRO and it keeps saying it needs to be updated which I press "OK" and then it asks for my password and when I type it in, it keeps stating it's "incorrect"? What should I do, any help would be greatly appreciated!
    Thanks

    Vegas Superstar wrote:
    My plan was to fresh install OSX, install Carbon Copy Cloner and then clone the old drive by plugging it in with a reading device I have.
    Hi VS,
    What "reading device" are you using?
    As it started the macbook told me I was '+running on battery power+' and '+was I sure?+'. With full battery I said yes and continued.
    It is best to have the power adapter connected when running a long process like this which cannot be interrupted.
    The new internal drive was also making a repetitive noise - not loud or anything but certainly sounded like it was searching for something. As the whole thing was stuck and nothing was working I held down the power button.
    How long was it "stuck?"
    I tried again with the first disc but it wont even do anything anymore! I took out the new drive and put in the old one. Booted up. Connected the new drive to the reader with the idea of re-formatting it via disc utility.
    But now the brand new drive is not readable and is making the a few funny repetitive noises.
    Please help me someone - I'm very worried about this new drive now!!! Is is broken or corrupted or something???
    It sounds like there is something amiss with the new HD. If you have access to a different external enclosure, (even on a PC, just to see if the HD will function), you could try erasing/formatting it again. If not, I think it's time to contact the vendor about a return.

  • Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

    The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
    So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
    ANY HELP OR ADVICE WOULD BE HELPFULL,
    THANKS GUYS

    THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
    BUT YEAH THANKS AGAIN...
    WASTE OF TIME THIS IS...

  • Help!!! Ipod touch problems. PLEASE Help!!!!

    Hey guys, I've been having some trouble with my Ipod i just got. I have a friend who just pick up an Iphone and didn't need his anymore. So I picked it up from him.
    It was working fine at his house and last night. I was trying to sync my music to it and I woke up and it wouldn't turn on. So I hooked it back up to my computer. I was able to sync up a lot of my music but I went back to add more. Well, I started to hook it up and it offered me to restore the factory settings and I did. I was able to get everything on it. It played a couple songs and I left it alone for a bit and it shut off. It wouldn't turn back on. So I hooked it back up to my computer and restored the the factory settings again. Then it turned off again and would not turn back on. I tried to restore factory setting again and I must have messed something up. I'm getting the 1600 error message.
    I don't know what to do. Please help. I have updated itunes and everything else. I don't know what else to do. He hadn't used it in awhile, but it was working well.
    I have not Jailbroken it. Neither did the person that owned it before me.
    SOme guy was trying to say I fried the logic board. It was working all I did was hook it up to my computer. If I try to restore on another account on my computer it gives me the 1604 error. I pretty sure that if it was fried I would be getting one error message constantly.
    Please help!!!!!

    No one can help me!?
    Thanks.

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • Win/iTunes doesn't recognize iPod + monochrome charger icon, please help

    Yesterday, my iPod was fine and now it doesn't seem to work. When I put in my iPod, it goes in, I see the Apple logo and then it goes straight to the monochrome charger icon. iTunes nor Windows recognizes it and when I take it out, the iPod doesn't work at all. Nothing appears. I tried the R's, and nothing. I've had the iPod for about 6 months, I'm hoping the battery didn't expire already... Someone please help me out. If it helps, iTunes 7.0 and I have Windows 2000 and Disk Use was enabled. Thank you.

    Anything here of help?
    http://docs.info.apple.com/article.html?artnum=302420

Maybe you are looking for

  • Marker comments not being saved

    I've been adding markers and then comments to those markers in the source panel on clips from the project pane.  The marker comments show up in the markers pane.  However, upon opening a new clip and then returning to the clip with markers, all of th

  • Emsg:was terminated by signal 10

    Hi., Apps:11.5.10.2 DB:10.2.0.4.0 Os HP ux Request completed successfully but We are getting the error "emsg:was terminated by signal 10" Log file details Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are : AMERICAN_AMERICA.WE8ISO

  • Video as intro

    I Would like to create a folio page where a video plays at page load witout any controllers. when the video is done it should act as a normal page. At the media tab, i checked the play on page load and did set the controller to None, the Poster is an

  • HCM Processes and Forms not working after SP Upgrade

    Hi Friends,   We recently upgraded our Service pack level of ABAP and Basis.SAP_BASIS -   from SAPKB70016 to SAPKB70019 SAP_ABA    -   SAPKB70016 to SAPKA70019. Prior to the the SP upgrade everything was working fine. After the upgrade we are having

  • Upgrade from panther to tiger

    hi, i have MacOS 10.3.9 installed on my dual 2GHz, Power PC G5 [512 MB DDR SDRAM]. The operating will not upgrade automatically from web. i would like to upgrade to panther. do i need a software disc to do this? if so does it matter which version of