IPod being recognized as being 185 GB and full...

So I plugged in my iPod to update this morning and first it said it was full and couldn't transfer, but more importantly it said it had a capacity of 185 GB. It changed the name it's recognized as too. I tried restoring factory settings, so now I have a blank iPod that my computer is still thinking is 185 GB. The iPod itself says that the settings are still 18.5 GB and empty. Any ideas or should I send it for service?

You have a mapped network drive that is using the same letter that the iPod is.
You can change the drive letter of the iPod using the Disk Management tool. Start->Control Panel->Admin Tools->Computer Management. Then select the Disk management tool, and change the drive letter of the iPod to one not in use.
Better instructions can be found here: http://docs.info.apple.com/article.html?artnum=93499

Similar Messages

Ipod not recognized or being installed correctly on windows?

My ipod is not being recognized by windows, have uninstalled itunes, checked the USB etc.... to no avail, the charge symbol is also not showing when plugged in, but it still charges, HELP?

Have your tried to [*_RESET and/or RESTORE*|http://www.apple.com/support/ipod/fivers/ipod5gen/#] your iPod? If not then please try that. Make sure that you have plugged your iPod into a wall outlet to charge for at least 4 hours in case the battery is low before you try to RESET/RESTORE.
If the above does not work then I would suspect a failed internal battery.
Axel F.

My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
Also, are the two iPhones the same model and same iOS version?

My iTouch is being recognized as a digital camera and cant take out my music from it.

i have an iphone and an ITouch and also a Ipod nano and and i just got a brand new computer cause my old 1 died. i still have music in my ipod iTouch and iPhone. i want to fill my new laptop with music. but since my iTouch and iPhone are both being read as a digital camera i can only take out photos from both. witch right now i dont care about the photos. my iPod nano on the other hand is being read as a storage device meaning i can take out the music out of the nano. i want to make it so i can also take out my misic from my iTouch and iPhone. in need of assistance. tried a bunch of methods but im tired of it. im im going to need professional help.

- It is normal and expected for the iPod to be seen as a camera
- What do you mean " when I put it in hard disk mode"? iPod touches do not have a disk mode.
- Does the iPod show in iTunes? If not try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

IPod not being recognized as being connected!

I purchased my iPod mini about a week ago and for the past 2 days when I plugin the iPod to the USB cord which is connected to my 2.0 USB port, iTunes & iPod Updater do not recognize that there is an iPod connected.
Can someone please help me?
Thanks.

Hi anybloch,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPod only shows an Apple logo and doesn't start up
http://support.apple.com/kb/TS1399
Cheers,
- Judy

My apple bluetooth mouse is not being recognized by my macbook air - and it was yesterday!

My apple bluetooth mouse was working perfectly with my macbook air until I had to change the batteries. Now it is not discoverable and I really can't operate without a mouse. I tried another logitech usb mouse and that was not discoverable either. Please help!

Today, when I turned on my iMac, neither my bluetooth mouse or keyboard were recognized. I had to connect my old USB keyboard-mouse to type this message.
And yes, I restarted my iMac, didn't help.
Can someone help?
PS: Barry, "resetting SMC" doesn't help

My ipod (6th gen nano) is not being recognized

I was moving some music on to it, decided to update itunes, and the moment it updated my ipod stopped being recognized. I've uninstalled and reinstalled itunes, restarted the ipod, and restarted the computer- all, multiple times. Thoroughly unimpressed and not sure how to get this working. Please help?

Hi, SFletches.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed > Windows Vista, Windows 7, or Windows 8.
iPhone, iPad, or iPod not recognized in iTunes for Windows
http://support.apple.com/en-us/HT204095
-Jason H.

Do I need to reinstall Lion because my iPhone stopped being recognized by...

Do I REALLY need to reinstall Lion because my iPhone stopped being recognized by Image Capture, Aperture and iPhoto but still shows up in iTunes?
I was on the phone with Apple Support with 5 different Advisors for more than 3 hrs today and we were not able to resolve the problem (yet). Although the problem is frustrating, it's always kind of a pleasure chatting with the Advisors. (I said kinda)
Approx 2 weeks ago, iPhoto, Aperture and Image Capture all stopped recognizing my iPhone. Oddly, iTunes has no problem recognizing the iPhone. Here are just a few of the things we tried but didn't get the apps to see the iPhone again:
- Removed and deleted all photos on camera roll using a windows machine
- Removed all other photos synced between my iMac and iPhone
- Made sure an image existed on the camera roll
- Recorded some video on iPhone and then tried to get iMovie to recognize device
- Restored (gulp) the device followed by a restore from back-up
- Restored again (double gulp) but this time to factory settings and kept the device as a "new iPhone"
- Logged on as different users
and on and on.
Also, after noting that my machine refused to send a systems report to my Sr Advisor (Jimmy) at Apple, he suggests we re-install Lion (ack). But when we went to access the Recovery Partition we realized it wasn't there.
No recovery partition?
Not sending system reports to Apple?
Several Apps not seeing iPhone while others are recognizing the device?
So now I wait for Lion to arrive on one of those nifty Apple thumb drives for me to try re-installing ;-(
The following screen grab shows my iPhone in iTunes but not recognized by Image Capture. URGH!

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

My canon rebel T3i isnt being recognized by my computer all of a sudden

I cant figure out why my camera isnt being recognized by my computer. And my EOS Utilitysoftware only has the Monitor folder and Picture Style Editor highlighted--- all ther others are greyed out as in not available. I have used this for 2 years already with no problems

Hi spaghettimark!
Thanks for posting on the Canon Forum!
To help the community and myself determine what is causing this, we need some more information.
What operating system are you running on your computer?
What version of EOS Utility do you have installed?
Are there any devices connected to your computer other than the camera?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

URLs are not being recognized inside PDF

URL links inside a PDF that I've created in InDesign CS5 are not being recognized.
I have email and website URLs embedded inside a PDF that was created in InDesign. These links are being recognized and I can click on them in Chrome, Opera, IE or Safari on the Mac. Eg, hovering over the mailto or http URLs the cursor turns to a hand and the links are clickable. Firefox is the only browser that does not recognize ANY links in the PDF. The cursor doesn't change to a hand instead it just remains as the standard text insertion cursor. The links are not clickable.
Firefox 26.0
Adobe Reader plugin 11.0.4.63 (latest as of today)

Current Firefox versions have enabled a built-in PDF Viewer that doesn't have all features that other PDF readers like the Adobe Reader have or may not function properly otherwise.
You can change the action for Portable Document Format (PDF) from Preview in Firefox to use another application like the Adobe Reader or set to Always Ask in "Firefox > Options/Preferences > Applications".
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
*http://kb.mozillazine.org/about:config
You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu if you want to display PDF documents in Firefox with another application (i.e. not the built-in PDF Viewer).
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them
*https://bugzilla.mozilla.org/buglist.cgi?component=PDF%20Viewer&product=Firefox&query_format=advanced&order=bug_id%20DESC&limit=300
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Headset No Longer Being Recognized

Hi,
I am currently using the Nokia X3 mobile phone with the nokia headphones that came with it. Everything was working fine this morning until this afternoon i plugged my headphones in again and they are not being recognized as being inside the phone meaning that any music or radio i play is played out loud through the speaker.
I have tried using different headphones and they seem to be working fine and i have also tried the nokia headset i use for my phone in my computer and the headset also seems to be working fine in the computer.
I was wondering if someone could please tell me how to solve this problem?
any help would be much appreciated, thanks in advance.

I have the same problem, I ordered a new set of WH 05 headphones and they work fine.
It's not the first Nokia I've had this problem with, I believe its to do with the remote(end call/skip) function being damaged when the headphones are used on a non-Nokia device.
I think the moral of the story is don't use Nokia remote headphones on anything non-Nokia...

IPod not recognized after restoring from Mac format.

Hey,
I used my old iPod photo with my Mac for a long time. Recently I got a new iPod video and enjoy it a lot. I ended up selling my old iPod to my dad on the conditions that I had to put all the music on there for him .
Anyway, I know that Mac formatted iPods aren't recognizable on Windows PC's. Thus, I restored my old iPod to its original factory settings using the iPod software updater/restorer before trying to load my dad's library from the PC. However, the iPod is still not being recognized by the PC. And when I try the update/restore on the PC it says "iPod service error." It does show up in the "My Computer" folder, however it says the disk must be formatted. If I formatted it manually on the PC and then tried restore on the PC would it then work?
Thanks.

NEVERMIND. IGNORE TOPIC. My issue has been resolved.

IPod touch not being recognized by iTunes on my MacBook, and on 2 other PCs

Hello,
After scouring the web and these discussion forums to no avail, I've decided to post my problem. I downloaded iTunes 8.0 yesterday, and updated the firmware on my iPod Touch to 1.1.5. I tried connecting my iPod, and nothing happened. It is not being recognized by my MacBook. So, I tried using another USB iPod connector, and nothing happened. I tried using a firewire connector, and nothing happened. Frustrated, I tried connecting to my one roommate's HP laptop and see if it would get recognized there - no. I then tried on my other roommate's laptop. The device was recognized to be USB, but iTunes wouldn't go ahead and try and reformat it. I'm starting to lose my mind! I've tried resetting the iPod touch itself loads of times to no success. I've tried restarting while having the iPod connected to the computer, and still nothing.
What should I do now?

Sorry about not getting to you on the quick-fast, but we aren't Apple employees.
What ended up being the solution you needed, as you said, you couldn't find any information already posted on this problem, so documenting your fix may help someone in the future.

TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

TS1369 Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

IPod being recognized as being 185 GB and full...

Similar Messages

Maybe you are looking for