IPod (brand new battery installed) drains while off

I sold my brother my 4th gen iPod color screen (20 GB) a few months back. He complained that the battery would die after being charged fully. Apparently the problem is that he charges it all the way, but while the iPod is off (and on hold), the battery mysteriously drains almost completely. I thought that it was just a problem with the battery, so I bought a 3rd party battery online and he installed it today but he says that the problem is still there. Has anyone on here had similar problems? What can I do to fix this? Thanks in advance for any suggestions!

You either have an alarm set in clock or calendar which is causing it to play while you think it is off or you have a logic board short. I'd bet on the latter. You can have it diagnosed at http://www.iresq.com for $9 or Google for other 3rd party repair sites.

Similar Messages

  • New battery still drains while not in use

    A few months ago I noticed a battery performance issue on my 1 gen nano (quickly discharged, drained while not in use). I bought it the day they were available in stores (which was in 2005) so assumed I just needed to replace the battery. I installed a new battery and fully charged it with the ac adapter. However, I'm still having the same problem. After some troubleshooting, I found that it played for 5 hours on a continuous loop with no EQ and backscreen light off. The battery was fully drained. I again recharged in with the ac adapter to make sure the battery meter was recalibrated. After it was fully charged again I placed it on my desk and didn't use it. However after another 5 hours or so it was drained again. This is my second purchased battery so I doubt it's the battery. I have restored the nano numerous times. Any thoughts as why a new battery would drain while not in use? Could this be a hardware issue? Thanks in advance!!

    You either have an alarm set in clock or calendar which is causing it to play while you think it is off or you have a logic board short. I'd bet on the latter. You can have it diagnosed at http://www.iresq.com for $9 or Google for other 3rd party repair sites.

  • Having problems with brand new battery installed...Help please!

    Here's my problem. I just recently replaced the battery on my 13" Macbook. The brand new battery ordered from Apple arrived on Saturday and up until last night everything was great. Now all of a sudden the computer is doing the same things it did with the old battery. I am getting the green light on the MagSafe Adapter even though the battery is not fully charged. I am also alternating between "Not Charging" on the battery icon and a "X" on the icon.
    I did some reading and tried resetting the PRAM and SMC. I even uninstalled Leopard and reinstalled Tiger (updating everything afterwards), thinking maybe it was a software issue. (I just recently installed Leopard and hoped it was just a bad install.) None of that really seems to work.
    There is one slight exception- the SMC reset. After I do the SMC reset I get the amber light from the adapter, the icon shows charging and all is well for about 15 to 30 minutes. Then I am back at square one.
    I was wondering if anyone had any suggestions or ideas on what could be going on. Any help would be greatly appreciated! Thanks!
    Message was edited by: luckylindyhopper

    It seems like you have eliminated all the easy fixes for your problem - what is left is the computer itself. Call Apple (800-275-2273) and explain the troubleshooting you have already done. They should set up a repair for your computer. If it is out of warranty you may have to pay for the repair.
    Best of luck.

  • Noticing significant battery loss after brand new battery installed.

    Hello, Applecare just gave me a new battery, optical drive, and new screen because of my proction plan on my Feb 2011 MBP. Waited until new battery was fully charged before unplugging to cycle battery. Was I supposed to let it charge 24 hours or something? Is this because of the new operating stystem?

    My first impression is that this could very well be normal. When you say "light use", how did you determine this? Is this from subjective self observance, or from an activity trace during the entire actual usage session(s)?
    You indicate that upon booting at 100%, you show some 8:53 remaining. This is with the computer presuming that the conditions at the time, and the acuumulated data calculations would indicated that kind of time remaining. Mind you, it has VERY LITTLE data onto which to base this calculation at that point. Only that the system is running, with no application load whatsoever.
    By the time the system indicates 85% left (really 80%, with Apple's new battery algorithm), the sytem bnow shows with the usage statistics now avaialble, that if you were to continue using the system under the average conditions for which it has been running, then 3:09 would be the estimated remaining run time.
    Mind you, when you read the Activity Monitor trace, Chrome is not active in much of any way (because you are not now browsing). You really have no idea, from your screenshots, just how much Chrome is drawing down power, when it really active (during actual use).

  • I just got a brand new battery god my iPhone 4S at the apple support and it's still draining super fast

    I just got my battery on my iPhone 4S replaced at the apple store and it's a brand new battery and I've had the battery for less than a week and it's already starting to drain fast just like my old one. I've been out of state for a few days. I don't know if that's part of the issue or not. Please help!!

    In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
    In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
    Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

  • HT1688 My iPhone 4s battery got drained while playing games, and now it won't open even if im charging. what can i do?.

    My phone's battery got drained while playing games and now it wont open if i connect it to my charger,?.what can i do? my phone was given to me as a gift from the a relative in the US and im from the Philippines. How can i fix it? Do i need to bring it to any apple center to have it replaced? or is there a quick fix to this problem?...

    Keep iPhone on Wall Charger for 10 minutes, it may turn ON itself. If still OFF, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start, this can sometimes take about 20 seconds time of holding both buttons while on charger.

  • Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Yes, it says no battery installed. The battery icon with an X and system profiler saying no batter installed.
    Tried the SMC Reset - didn't work!

  • Brand new Battery

    Hey Guys,
    My iBook(1.42Ghz) has now 2 batteries. My first battery that came with my computer used to hold a 5-6 hour charge, now its at 190 cycles and holds about 1:30. So, I decided to purchase a new battery. I charged my new battery and unplugged my charger to see how much it will hold. I changed my settings for Better Battery Life and I get about 4 hours out of a brand new battery. Now according to the Apple Store Website, it should be holding 6 hours. What should I be doing about this?
    *Note by computer is under AppleCare, are my batteries covered by this?
    Matt

    If you bought the battery from Apple, it should have its own Applecare warranty. Best check with Apple as long as you are still under warranty. If you can get to an Apple store, they can probably check everything out for you and it won't cost you anything. There is always the possibility that your computer might have a problem that is causing the shorter battery function, and if so, you definitely want to have this documented while you have Applecare. And if the battery itself is faulty, they certainly should be willing to replace it.
    Good luck!

  • HT1119 I recently purchased a brand new battery for my mac book pro and if I allow my computer to run out of charge and plug it in just moments later it can take up to 40 minutes to turn back on again!

    Is anyone else having this problem? I rely on my computer heavily for work and school and this is just not acceptable! After paying $125 for a brand new battery I would have never expected these problems.

    I'm sure that if you search hard enough, you'll find someone else who has had a similar problem, but that does not mean that it is remotely normal or common.  Apple definitely needs to replace the machine, but don't be afraid that the same thing will happen with the new one.
    Of course, that's assuming that this wasn't a case of user error.  It's hard to understand how it could be, but in my years of tech support, I've learned to never discount such possibilities.  I've seen people do things like forceably shove plugs into the wrong ports, seemingly oblivious to the fact that it doesn't fit and insistent that it should.

  • How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

    clintonfrombirmingham is right, there is no way to exactly tell. But from personal experience, a new battery on a 2008 will last for about 2 1/2 hours with a higher screen brightness and doing something taxing to the battery (like gaming or running lots of 3D programs). But if you're just listening to music with the brightness all the way down, and no programs running, you could get up to 12 hours. So for average use, it should last you a whole business day (assuming you don't use it more than 30% 0f the time). Hope this kind of gives you more of an idea of what to expect:)

  • Brand new Battery charging 10% at a time...

    Hi I have a 1.3ghz with a brand new battery (not apple some chinese ebay...) and everything works fine except the battery wont charge more than 10% at a time.
    After every 10% I get the not charging message, I remove then put back the battery and it starts for another 10%. It's charging all the way to 99%. And will offer reasonable time and power when I use it.
    I tried reseting PMU and Nvram.... nothing.
    I not sure it's a battery problem because once charged it offers great and stable power for near 5h30.
    Any ideas, help, or similar seen things.
    Could it be the power supply, logic board......?????
    Thanks for the help!

    jfmebo:
    I recently purchased an eBay battery for my daughter's iBook G4 and it seems to work fine. The issue may be with this particular battery that you got. I would see if you can get it exchanged.
    The other possibility is that your DC in board may be failing and not supplying continuous power the battery.
    I would first get the battery exchanged. If the same behavior persists, I would look at the DC-in board.
    cornelius

  • Brand New Battery still doesnt charge just show X   and i have reset smc still doesnt work

    Brand new battery for apple still does not work have reset smc many times  still shows X in the battery and when it says its     charge the battery icon says 0%     I KNOW ITS NOT THE BATTERY BECAUSE I HAVE PUT IT IN A ANOTHER COMPUTER AND IT WORKED FINE 
    ANY IDEAS??????

    You may have a problem with the logic board. I had the same issue on a MacBook Pro and had to get the logic board replaced.

  • Brand new battery issue....installed myself, still depleting power quickly

    Good morning everyone.
    I have one of the original Ipod Classic 160's. Its been a wonderful item thus far. The battery started losing power a little bit quicker than normal. I probably would only get about 10 hours out of it. Not too bad, but that's on all low settings.
    I figured I'd go ahead and take a crack at opening it myself and put in a new battery (side note: you have to be really gifted and have the right tools to not damage the body of the ipod slightly).
    The new battery is in. It immediately read only half power, so I plugged it into my home player to charge it. It charged really really quickly. I started playing it, and it started losing a little power quickly as well. I charged it again over night, and on my 40 minute trip to work this morning, it lost a little bit of power.
    Obviously, one of my options is that I got a bad battery, BUT...a bad battery is usually a more dynamic problem then just the little discharge its doing. Plus, its discharging almost exactly like my old battery did. So, although Its still a possibility its a bad battery, I've got a theory that maybe there is a hardware or software issue????
    That's my main question: Are there hardware and/or software issues that could cause a battery to drain, no matter how good the battery is?
    Any other thoughts are welcome too.

    I apologize for bumping my own question here, but I figured it would be best to share my experience for others to read.
    I am sending this as a buyer beware. If you have the Classic 160, your battery should be 850 mah at minimum. This place I bought replacements from advertised a 550 mah as for the Ipod classic 80/160...not true.
    Just an FYI. I know this is a rare situation, but just in case there is that one person that runs in to this. My initial battery from Apple was definitely dying, and it just happened to be coincidence that the new batteries didn't have enough "juice" to run it properly, so I continued to think it was me. 3 batteries later, its sorted.

  • Brand new battery in 4s and still goes dead in 1 hour!?

    Tried all the suggestions on the support site, took the phone to the Apple store, they put in a new battery. I charged it to 100% and then unplugged it. This morning after it was asleep all night, I find it drained this morning.

    sounds like a brand new defect battery
    or you are playing crazy highe demanding 3g games while using the gps and 3g connection to their fullests

  • My ipod had no battery so it turned off. An hour later I put it to charge and only the apple logo has shown up for ages...what do i do?

    Someone please help me to turn it on.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Error while maintaing a loan type for an employee

    Hi gurus This is in regard to the Loan while maintaing for an employee through PA30 " Employee 002 is not eligible for the loan 7501 on 01.10.2008" though i tried to Maintain it for different dates still iam not able to maintain. Even i tried maintai

  • Maximum file size in KM

    Hi All, My Requirement is to restrict maximum size while uploading file in user personal documents in KM. I have referred the following links https://www.sdn.sap.com/irj/scn/thread?messageID=1167627 https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/w

  • Upgrading to Snow Leopard while doing initial back-up

    I'm doing an initial back up on Time Machine. Is it O.K. to do an upgrade to Snow Leopard at the same time or do I have to stop the back up? Also, how do I know which files have been backed up?  Help, please!

  • Can't start Application server

    Hi, When I am to start Application server within Jdev 11.1.1.4, I have got this Caused by: java.lang.ClassNotFoundException: weblogic.Server      at java.net.URLClassLoader$1.run(URLClassLoader.java:202)      at java.security.AccessController.doPrivi

  • OAM 10g reinstall issue

    We're having a problem reinstalling OAM 10g. We had an OAM 10g install with config and user data stored in OID. All the OAM components were uninstalled from a testing server, the oblix schema objects, attributes and oblix branch were deleted from OID