Ipod cable with USB & IEEE

I buy a ipod cable with together the 1394 & usb connect together, so is this mean it can use 1394 to transfer data to ipod?
thk a lot
The url show the cable that i buy.
http://hk.f2.page.auctions.yahoo.com/hk/auction/b3890652

so is this mean it can use 1394 to transfer data to ipod?
No, you cannot.
You can only transfer data using USB. There is no Firewire controller in the 5th Gen iPod, so even if you have the right cable, data transfer will still be impossible.
That cable can be used to charge the iPod via Firewire, but that's about all it can do with the firewire side of it.

Similar Messages

Can I use my iPod cable with my Iphone 4s?

Does anyone know if it is ok to use an iPod cable with and iPhone 4s?

Yes. Their USB cables are identical.

Ipod works with USB 1.1, but not USB 2.0 (30GIG)

Has anyone had this issue? I plug my 30GIG iPod into a USB 2.0, and it says updating, do not disconnect for what seems like an eternity. Eventually, it pops up saying the ipod appears to be corrupted, restore to factory settings? I respond ok, and then it fails to restore. Tried multiple USB 2.0's, same thing.
Next, I pluged into my USB 1.1, and it pops up itunes (latest version) almost immediately, and shows the ipod, and allows me to xfer tunes immediately.
Any thoughts?
Thanks

I'm having a similar problem. I've tried reinstalling USB2.0 drivers, iTunes, iPod but cannot get it to work. It just shows up in the device manager as 'USB Mass storage device' with an exclaimation mark next to it. I've tried to update the drivers for the 'USB MAss storage device', however it just says that I've already got the most updated drivers for the device. I've succumbed to the 1.1 for now, but would really appreciate it if someone could shed some light on this situation!

IPod works with USB 1.0 but not 2.0?

I'm trying to get my cousins iPod Shuffle working for her but I'm not having much luck...
When I plug it in to any port on the computer, I get "USB Device Not Recognized" and it shows up as an "Unknown Device" in Device Manager.
However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes.
What do I need to do to get this to work with USB 2.0? What could be causing the problem? Thanks!

No, the fact that they haven't needed to update the drivers means they work perfectly well.
If they work perfectly well, how come they cannot pick up the iPod (which has nothing to do with iTunes)?
Also, how do you know they haven't needed to?
More likely they simply haven't even looked at them to see if they need updating.
Oh, and from the first post...
"However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes."
But enough of this.
Good luck with your problem.
Hope you get it fixed.

New iPod working with USB 1.0

So I heard that the new Video iPods are USB 2.0. First question, why the **** is apple going away with firewire? Second how does the new 4th generation work with USB 1.0 on an FP iMac? I am sure it is slow but will it work? Still a bit frusterated they arn't firewire....
Thanks for the help.

why the ** is apple going away with firewire?
They haven't said. Perhaps to save space on the iPod.
From everything I've read it seems to be exactly that, as if you compare the dimensions of a FireWire chip to that of a USB chip, the size differences are in general rather great. In addition, although I cannot vouch for this myself, I've read in multiple places that FireWire chips are more expensive to manufacture, therefore this could be yet another reason. Not to mention the obvious one that the majority of iPods users have Windows machines, very few of which are equipped with FireWire. It is kind of a shame that Apple is straying away from FireWire given that in multiple computers that I've tested, syncing via FireWire has proven faster (using my old 4G iPod though of course) however the speed differences are pretty marginal. Finally, the thinness and price of the new iPods truly are amazing given both the 'competition' and previous generation iPods, so it seems to be a fair enough tradeoff.
Happy Holidays to all!!!
Mervyn

IPOD frozen with USB symbol

My IPod Touch was updating on ITunes, when my laptop crashed. Now it won't restore or do anything and just shows the power lead with a USB plug in symbol and the itunes logo. Can anyone help, we've tried everything

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod 6Gen with usb 1.1/1.0

will a 6 gen classic work (charge and transfer) throuhg a usb 1.1/1.0 port
even if its slower

You may experience problems if you try to send too much data in a single transfer. Avoid using automatic synchronization.
(33928)

What do they replace a 1st generation ipod nano with now?

What do they replace a 1st generation ipod nano with now? from the recall.

Glad you were able to sort it out - iPod cables and USB ports can sometimes by mysterious in their variability - though in your case the symptoms suggest that a conductor may have failed inside the cable you were using. I've found that, using a selection of cables:
my 2G nano will occasionally be detected as being connected via USB 1.0 (even when connected to 2.0 ports)
my 3G nano syncs fine but steadfastly refuses to charge when connected to any of the USB ports on my main computer, though using the same cable charges happily when connected to a USB AC adapter
Such things are just sent to annoy us
On your other question, it is possible to completely replicate your library across two or more PCs. As long as the iTunes database (iTunes Library.itl) is duplicated as well as all your media you then have two physical copies of one logical library, with which iDevices will sync on either computer. See turingtest2's notes on Make a split library portable to see how to verify that your library is in a consistent structure to make replication easier, and Backup your iTunes for Windows library with SyncToy on one method for replication (typically using an external hard drive that also serves as a regular backup). My configuration looks like this:
where the library on my "master" system is replicated, using MS SyncToy and an external HDD, to two other systems - a secondary one at home and one in my office at work. My iDevices will sync to any of these without the "threat" of wiping their content because iTunes detects that they've been previously synced to a different library - because of the replication method used the "unique" library identifier that iTunes uses in the sync process is actually the same on all three systems.

My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

My ipod touch is stuck on a screen that shows a picture of the USB cable with an arrow to "itunes" and pic. of a CD with a music note over it....what do I do?

My ipod touch is stuck on a screen that show a picture of the USB cable with an arrow to a picture of a CD with a music note over it. I have reset and turned on and off.....what do I do??

Connect it to iTunes and restore it.
B-rock

My Ipod touch is frozen. Shows USB cable with arrow pointing to Itunes. What is the problem? This is the second one I have had that has done this!

My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!

This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock

Can I use the USB cable of my ipod nano with my iPhone 3G?

Hi,
I am a new user of Apple. I have a ipod nano and a iPhone 3G. I wonder if I can use the USB cable for the ipod nano with my iPhone 3G. Just want to make sure if it is 100% compatible. Thank you very much.

Thank you very much!

IPod Nano 1st Gen Wont Charge With USB Cable

I just purchased a brand new 4 gb white 1st gen iPod nano. From the moment I took it out of the packaging and tried to charge it with the provided USB cable I noticed it was not working. No response at all, nothing was getting into the iPod. I tried multiple USB cables with equal luck.
I have a Dension I.C.E Link Plus in my car, I figured I'd try it, sure enough the iPod Nano began charging and booted up. I finished charging it to a full charge in my car.
After a few days of use, I went to charge my iPod via USB cable and when I plug it in, it connects to the computer I can transfer songs perfectly but it constantly states that the iPod is "charged" displaying the plug battery icon not the flashing thunder bolt. So I figured it was charged, when I unplugged it from the USB cable the battery meter was clearly not charged.
So, I assumed it was my computer USB ports being messed up so I purchased a A/C Wall Charger Adapter. Once again it would only display "charged" so far the only thing that will charge my nano is my car.
With the A/C wall charger I have even tried multiple cables with no luck.
CAN SOMEONE HELP ME!?!?!? I thought it was suppose to charge with the provided USB cable? Thanks!

Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

Ipod cable with USB & IEEE

Similar Messages

Maybe you are looking for