IPod calendar appointment setting freezes and does not accept Done or Cancel button action

I tried to make appointment within time frame on iPod touch, and set start/finish times, and pressed "done" on UR screen. It changed color but did not execute the appointment. I then pressed "cancel" to see if I could remove the appointment settings and return to the earlier screen. It changed color but did not execute the cancellation.  I cannot return to the monthly page of the calendar.  It does execute the "all day" setting on the rotary-style date wheel, and the all day slider does cancel itself when I slide the on/off key.  Is my iPod touch starting to fail?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:                                                
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar                                      

Similar Messages

  • TS1456 When it is trying to restore it freezes and does not restore.

    When it is trying to restore it freezes and does not restore.

    If no error messages
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Admission charge my iPod is turned a corner, and Does not want to load composure?

    Admission charge my iPod is turned a corner, and Does not want to load composure?

    Could English not be your native language since you question does not make sense? If so try posting in your native language. Otherwise clarify.

  • TS3274 how do I get the keyboard to come up -- without re-botting?  On the ipad2, it occasionally freezes and does not permit the keyboard to appear

    how do I get the keyboard to come up -- without re-booting?  On the ipad2, it occasionally freezes and does not permit the keyboard to appear

    Have you the latest iOS version (5.1.1)? If not, an update might solve the problem.

  • When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

    When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

    Hi,
    Did you try any other browser? is it hosted on Business catalyst? If yes and if you are using custom domain, then login to admin panel using system domain (mysite.businesscatalyst.com) and then try to delete. 
    Let us know if that works

  • Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

    Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • Satellite U305-S7432 freezes and does not respond sometimes using Win XP

    Hello.
    I have a Satellite U305-S7432 notebook.
    Originally it came with Vista but I reformatted with XP Pro. I have installed all updates up to service pack 3.
    My problem is that sometimes when I try to restart the computer it simply freezes and does not respond at all to any input. I notice that this happens if I close and later open the lid (meaning that the computer goes input standby mode and comes back).
    Please note that the standby mode works perfectly fine and the computer leaves standby fine but afterwards when I try to restart, the computer will simply hang instead of restarting.
    If it never enters standby mode, the restart takes place as expected.
    I have installed all drivers and there are no question marks in Device Manager. I updated to the latest chipset driver from Intel (for the mobile 965) as well. Lastly, I also tried adding /forceresetreg to my boot.ini (as suggested by: http://support.microsoft.com/kb/822624) but to no avail.
    Any ideas?

    This is a Toshiba US notebook series and you should check the Toshiba US driver page for available drivers:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    If you will not find the XP drivers at this page then you could try to install some single drivers for Sat U300 from the Toshiba European page but Im not quite sure if such XP drivers will run on you Sat U305. But its worth a try!
    Good luck

  • Computer crashes/hangs and does not accept any command?

    why after opening Windows, computer crashes and does not accept any command?
    only solution (compromise) which I found is to disconnect and reconnect the PC unit; Windows runs properly after the surgery to close it; next morning found the same problem...

    Hello Liviu,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how after your computer loads Windows, it locks up or freezes, and I would be happy to assist you in this matter!
    For further assistance, I will need to know:
    The Product and Model Number of your desktop computer.
    The version of Windows you have installed on your computer.
    If your computer has completed all of its important Windows Updates.
    If you have updated your HP drivers using the HP Support Assistant.
    If this is an on-going, or recent issue.
    If you have added any new software or hardware to your computer.
    If the computer is plugged directly into a wall outlet.
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers! 
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Accidentaly i have block my Mac and does not accept my pasword, what can i do? I've written the right pasword and does'nt work.

    My Mac is blocked and does not accept my pasword, what can i do, to unblock it?

    Thanks for your replies.
    I originally posted because I thought either I was doing something stupid, or that there was some little known setting or control that might sort things out.
    When I called support, they tried 'little known setting or control' route, but it turned out that the ipad was definitely faulty and they have offered a replacement.
    If I can help others having the same issue, I would say call support first before returning as it is possible to reset it if it is a software problem, rather than a fault with the hardware.

  • When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

    When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

    I have never seen it but then I run SL which is much more reliable than Lion..
    See
    http://pondini.org/TM/E4.html
    Check the master guru of all TM problems.

  • Satellite A65 freezes and does not respond after adding of RAM

    Gents,
    My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
    But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
    Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
    Experts, help to find exact reason especcially if u had similar problem.

    Hi
    Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
    If the notebook will not hang and will not freeze then its a very clear case for me.
    Either the second module is not compatible or faulty.
    In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
    Additional use the modules recommend by Toshiba

  • My ipod touch is continually loading and does not come on

    ipod is continually loading. please how do i fix this

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

    wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

    noelani72 wrote:
    I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
    Message was edited by: noelani72
    Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
    My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
    Good luck.

  • Finder freezes and does not respond

    I have an iMac with an Intel Core i3, using Mac OS X - 10.6.8 Snow Leopard.  My finder continually freezes up on me and I have to re-launch the finder various times a day (I'm talking like 30 times a day sometimes).  I use a lot of actions in Photoshop and a lot of AppleScripts to make particular files all day long.  Sometimes Photoshop will hesitate for about a minute when trying to save tiffs - I usually re-launch the finder and it does fine for awhile.  I use to run a script that build my PDF file a certain way and would freeze up when it was using an action in the script to make a picture of it to put it on another server.  Now I'm using another more advanced script and it freezes inbetween the making of multiple PDF files - until I re-launch the finder, then it continues.  There have been various times no matter what I'm doin, the finder would - "not respond".  During these times it would make Illustrator and Photoshop to "not respond", sometimes I have to force quite programs, other times I just re-launch the finder and then everything responds good - for a time.  The odd thing about this, is I have swiched machines, using all the same versions and programs, scripts and actions, and still does the same thing.  I have moved around the room connecting to another ethernet thinking it might have been the connection, but no luck.  I seem to be the only one in my department that has these type of issues to this magnitude.  Other people here have had freezes and glitches, but not like me. I use a lot of personalized key commands and the only thing I can think of, is the combination of my personalized key commands in all programs, all the actions and all the scripts I use, may be a little too much for the iMac with Snow Leopard to handle.  Plus we are hooked up to multiple servers with the scripts telling certain files to go to certain directories.  Note: simply restarting does not fix any of this.  Does anybody have any ideas about this issue???

    You can remove the volume from /Library/Filesystems/Xsan/config/automount.plist . Then you mount manualy with the following command:
    mkdir /Volumes/<volname>
    mount -t acfs volname /Volumes/Volnames
    from xsan 2.0 you can use the xsanctl command to mount:
    xsanctl mount <volname>
    I do not use 2.0 yet, so did not test it.
    An empty automount.plist looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    </dict>
    </plist>

  • HT1657 My movie rental freezes and does not play properly

    I rented a movie and when I pressed play it would not play. When it finally started to play it would freeze and looked very digital.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Maybe you are looking for

  • Print of Purchase returns invoice

    Hi Gurus, How to take a Print of Purchase Returns Exc invoice, while trying in J1IV I am getting error Document is already completed. If i see the with that invoice number in J1IS it is displaying. Regards, Vijay

  • AVGetOptimizerPresets and 'Standard' presets - name is Acrobat language-dependent?

    I am calling  AVGetOptimizerParamsForPreset with "Standard" as the presetName parameter - this works fine on an English OS (with English Acrobat). However, on a Japanese OS (with Japanese Acrobat), it fails - apparently, the name "Standard" is in Jap

  • Tiger iCal vs Leopard iCal

    Can someone enlighten me as to the differences between iCal in Tiger vs Leopard? I believe there are some subtle differences, but which is best? If I upgrade to Leopard, will I be getting increased functionality? Thanks in advance.

  • Can I replace a cracked glass on the iPad

    Can I replace a cracked glass on the ipad

  • Maps - which do you use?

    Google Maps vs. Yahoo Maps vs. MapQuest vs. Microsoft Live API's Which do you prefer and why? Dan