IPod can't connect after last update
I tried to update my ipod to the newest software (8.02 or whatever), but after I finished downloading the update, it told me I couldn't install the software for some reason. Now, my ipod seems blank, as it only shows me the USB cable pointing to the itunes logo, and when I connect it to my computer, my computer detects only a USB device, but cannot find a driver for it. And it doesn't show up in my itunes or My Computer.
I updated my itunes to the newest version. What should I do?
I'm having the same exact problem since I attempted to upgrade and I'm about to pull my freakin' hair out!! I"ve been trying everything I can find and iTunes continues to tell me that it "detected an Ipod in recovery mode. You must restore this Ipod before it can be used with iTunes" Well, I've restored it several times, same thing. I've also went through 4 of the 5 R's with the exception of uninstalling iTunes. I have close to 20,000 songs on an external hard drive and if I uninstall, it's going to go through every one of them, uugghh!! Last resort choice only! Anybody else figure something out??
Similar Messages
-
IPhone 3GS can't connect after software update
My iPhone 3GS can't connect to my M1424WR anymore after I updated my iPhone software. Apple suggested I update my router software - any tips?
Try use "forget this network" then re enter the wep/wpa key (network password) this happens sometimes with my iTouch.
Other than that, there is no reason the iPhone cannot connect. =/ -
Can't connect after Aiport update
Hi folks,
I installed the Airport update last night and now cannot connect to any wireless networks.
Is there something I need to do to fix this?
These are open networks i am trying to connect to (at the library, for example) - no passwords necessary.
advice would be much appreciated.
Thanks!
MacBook 2.0 Ghz 2GB RAM / 30GB ipod video Mac OS X (10.4.7)Thanks, Gregory I will try this. I tried manually connecting and to multiple networks and it didn't like it. As the networks I am trying to connect to are not password-protected, I'm not sure if this fix applies to my issue, but it is certainly worth a shot. Thanks!
I have been reading and noticed that in another thread (Uninstalling an 'Installed Update') that an 'Archive and Install' was recommended.
Does anyone think that I should try this? I'm a little scared of it. -
Can play audio after last update cant use feedback option either
Dear Sir after the latest firefox update the most of the audio pop-ups from individual radio stations, from site that I am using religiously to listen to radio from my country of origin, dont play audio. However, I am able to open all audio pop-us when I use explorer. What is the problem and how can I fix it?
many thanks
PS I cannot even send this feedback by pressing submit feedback I had to use: ask a new questionjoqueza wrote:This is just frustrating. After doing a system upgrade (which upgraded xorg to version 1.5) I can't use the keyboard anymore. In fact, my screen would freeze also, as long as I was using the latest Xorg version. This machine's card is a geforce2 mx440..
Perhaps you can find some help here http://wiki.archlinux.org/index.php/Xor … otplugging (or in one of the many threads about xorg 1.5 breaking input devices)
No Idea about your problem after downgrading (expect just as a guess, there is some problem with xbinkeys when it is autostarted with the window manager -- http://bbs.archlinux.org/viewtopic.php?id=65468). -
Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?
Finally, this helped me:
https://discussions.apple.com/message/23602871#23602871 -
Safari can't connect after latest Lion update
Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure? -
Apple TV2 can't find my network connection after recent update?
Why can't my Apple TV2 can't find my network connection after recent update?
I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.
-
After last update to CC 2014, I can't use Lightroom
After last update to CC 2014, I can't use Lightroom - it says Develop module is disabled. Please renew your membership to reactivate Develop module. ???
Hi Przemysław Sakrajda,
Please follow the suggestions mentioned under the below article and let me know if that helps.
Not able to launch Lightroom after updating it to 5.5 from Creative Cloud
Hope that Helps.
Cheers !
~ Arpit -
Can't email after security update last 48 hours
can't email after security update?
help ISee possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first. -
ITunes no longer opening after last update.
ITunes not opening after last update on my main user. Second user is fine however accesses different library.
Computer freezes when attempting to open ITunes. Have also searched for the sync services file but is not located under reveal in folder or go to options.
Apologies I am not the best tech savy person and have read other posts trying to solve the problem. Other posts asked for the following reports.
Any assistance would be greatly appreciated - we are an apple household and this is effecting everything!
Log List ITunes
8/06/2014 2:39:28.757 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Spawned and waiting for the debugger to attach before continuing...
8/06/2014 8:51:05.999 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[3827]) Exited: Terminated: 15
8/06/2014 9:04:40.000 pm kernel[0]: hfs: mounted iTunes on device disk3s2
8/06/2014 9:04:40.513 pm mds[40]: (Normal) Volume: volume:0x7fd43483dc00 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/iTunes
8/06/2014 9:06:34.278 pm sudo[3918]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.yTVHam/Scripts/com.apple.pkg.iTunesX.tO4vG4 ; USER=mel ; COMMAND=./Tools/AlertAll.app/Contents/MacOS/AlertAll /
8/06/2014 9:06:46.629 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Exited with code: 1
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:08:05.643 pm iTunesHelper[4058]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
8/06/2014 9:11:05.077 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[4118]) Exited: Terminated: 15
I was unable to find anything starting with iTunes under User Diagnostic Reports however located several starting with CFPREFSD, this was the latest one
Process: cfprefsd [4137]
Path: /usr/sbin/cfprefsd
Identifier: cfprefsd
Version: 855.16
Code Type: X86-64 (Native)
Parent Process: launchd [281]
Responsible: cfprefsd [4137]
User ID: 502
Date/Time: 2014-06-08 21:11:04.973 +1000
OS Version: Mac OS X 10.9.3 (13D65)
Report Version: 11
Crashed Thread: 2 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x000000010e0c3000
VM Regions Near 0x10e0c3000:
Dispatch continuations 000000010d800000-000000010e000000 [ 8192K] rw-/rwx SM=PRV
--> mapped file 000000010e083000-000000010e1be000 [ 1260K] r--/rwx SM=COW /Users/USER/Library/Preferences/*/*.plist
MALLOC_LARGE 000000010e1be000-000000010e2f9000 [ 1260K] rw-/rwx SM=PRV
Thread 0:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8f0bc662 kevent64 + 10
1 libdispatch.dylib 0x00007fff963fc421 _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff963fc136 _dispatch_mgr_thread + 52
Thread 1:: Dispatch queue: com.apple.root.default-overcommit-priority
0 libsystem_kernel.dylib 0x00007fff8f0bbcaa __sigsuspend_nocancel + 10
1 libdispatch.dylib 0x00007fff964047da _dispatch_sigsuspend + 21
2 libdispatch.dylib 0x00007fff964047c5 _dispatch_sig_thread + 45
Thread 2 Crashed:: Dispatch queue: com.apple.root.default-priority
0 libsystem_platform.dylib 0x00007fff982c80de _platform_memmove$VARIANT$Nehalem + 254
1 libxpc.dylib 0x00007fff907cf81e xpc_data_create + 82
2 com.apple.CoreFoundation 0x00007fff90641386 -[CFPDSource acceptMessage:] + 806
3 com.apple.CoreFoundation 0x00007fff90648d67 __handle_synchronize_message_block_invoke + 215
4 com.apple.CoreFoundation 0x00007fff9063fc1a __90+[CFPDSource withSourceForDomain:forRemoteClient:inContainer:user:byHost:managed:perform:]_b lock_invoke_2 + 42
5 libdispatch.dylib 0x00007fff963fd1bb _dispatch_call_block_and_release + 12
6 libdispatch.dylib 0x00007fff963fa28d _dispatch_client_callout + 8
7 libdispatch.dylib 0x00007fff963fc082 _dispatch_root_queue_drain + 326
8 libdispatch.dylib 0x00007fff963fd177 _dispatch_worker_thread2 + 40
9 libsystem_pthread.dylib 0x00007fff998cfef8 _pthread_wqthread + 314
10 libsystem_pthread.dylib 0x00007fff998d2fb9 start_wqthread + 13
Thread 2 crashed with X86 Thread State (64-bit):
rax: 0x000000010e1be040 rbx: 0x00007f9bb24043d0 rcx: 0x0000000000000010 rdx: 0x00000000000fa5fc
rdi: 0x000000010e1fe010 rsi: 0x000000010e0c2fd0 rbp: 0x000000010d7294b0 rsp: 0x000000010d7294b0
r8: 0x0000000000000003 r9: 0xfffffffef1e41fff r10: 0x00007f9bb2404210 r11: 0x000000000013b040
r12: 0x000000010e1be000 r13: 0x00007f9bb2504b40 r14: 0x000000010e083000 r15: 0x000000000013a60c
rip: 0x00007fff982c80de rfl: 0x0000000000010202 cr2: 0x000000010e0c3000
Logical CPU: 1
Error Code: 0x00000004
Trap Number: 14
Binary Images:
0x10d5d9000 - 0x10d5d9fff cfprefsd (855.16) <4342939E-DB15-3A1A-BCDE-6B3EF244CAAB> /usr/sbin/cfprefsd
0x7fff6eedc000 - 0x7fff6ef0f817 dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
0x7fff8cc03000 - 0x7fff8cc2cff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x7fff8ee44000 - 0x7fff8ee4bfff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x7fff8ef27000 - 0x7fff8ef2bff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x7fff8f0a1000 - 0x7fff8f0a5ff7 libsystem_stats.dylib (93.90.3) <4E51D5B0-92A0-3D0D-B90E-495A1ED3E391> /usr/lib/system/libsystem_stats.dylib
0x7fff8f0a6000 - 0x7fff8f0c2ff7 libsystem_kernel.dylib (2422.100.13) <498AEBD7-4194-3CF2-AA16-D5D03FFBD8C0> /usr/lib/system/libsystem_kernel.dylib
0x7fff8f626000 - 0x7fff8f637ff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x7fff8f638000 - 0x7fff8f686fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
0x7fff8f879000 - 0x7fff8f894ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff8fb06000 - 0x7fff8fb09ff7 libdyld.dylib (239.4) <7C9EC3B7-DDE3-33FF-953F-4067C743951D> /usr/lib/system/libdyld.dylib
0x7fff8fb0a000 - 0x7fff8fb0bffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x7fff8fb2e000 - 0x7fff8fb33ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x7fff904b0000 - 0x7fff90695fff com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff907cd000 - 0x7fff907f1fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff90e2c000 - 0x7fff90e2dff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff912c0000 - 0x7fff912c1ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x7fff928cb000 - 0x7fff928d5fff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x7fff9342b000 - 0x7fff9343cff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x7fff935ac000 - 0x7fff935b3ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x7fff94021000 - 0x7fff94048ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x7fff94904000 - 0x7fff9490bff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x7fff94d40000 - 0x7fff94eedf27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff94eee000 - 0x7fff94ef3fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x7fff94f28000 - 0x7fff94fb1ff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff9510d000 - 0x7fff9510dff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x7fff95121000 - 0x7fff95122fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x7fff9551f000 - 0x7fff95546ff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x7fff957eb000 - 0x7fff959a3ffb libicucore.A.dylib (511.32) <A7CE7DAD-D3AD-36A2-BE4F-25C5F21FADBB> /usr/lib/libicucore.A.dylib
0x7fff95bf4000 - 0x7fff95bf6ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x7fff95c26000 - 0x7fff95c68ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x7fff96057000 - 0x7fff9605ffff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x7fff963f9000 - 0x7fff96413fff libdispatch.dylib (339.92.1) <C4E4A18D-3C3B-3C9C-8709-A4270D998DE7> /usr/lib/system/libdispatch.dylib
0x7fff96414000 - 0x7fff9641dff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x7fff96a20000 - 0x7fff96a21ff7 libSystem.B.dylib (1197.1.1) <E303F2F8-A8CF-3DF3-84B3-F2D0EE41CCF6> /usr/lib/libSystem.B.dylib
0x7fff982c4000 - 0x7fff982caff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff99815000 - 0x7fff99867fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x7fff998cd000 - 0x7fff998d4ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x7fff9996e000 - 0x7fff9996fff7 libsystem_sandbox.dylib (278.11) <B46E4040-A8C6-3EBC-91F8-F1CB01106614> /usr/lib/system/libsystem_sandbox.dylib
0x7fff99c2c000 - 0x7fff99c5bfd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x7fff9a11e000 - 0x7fff9a120ff3 libsystem_configuration.dylib (596.15) <4998CB6A-9D54-390A-9F57-5D1AC53C135C> /usr/lib/system/libsystem_configuration.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 6540
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=74.9M resident=13.6M(18%) swapped_out_or_unallocated=61.2M(82%)
Writable regions: Total=45.8M written=480K(1%) resident=584K(1%) swapped_out=0K(0%) unallocated=45.2M(99%)
REGION TYPE VIRTUAL
=========== =======
Dispatch continuations 8192K
Kernel Alloc Once 4K
MALLOC 28.4M
MALLOC (admin) 16K
STACK GUARD 12K
Stack 65.1M
VM_ALLOCATE 28K
__DATA 1080K
__LINKEDIT 66.2M
__TEXT 8872K
__UNICODE 544K
mapped file 1260K
shared memory 4K
=========== =======
TOTAL 179.2M
System Profile:
Model: iMac12,2, BootROM IM121.0047.B1E, 4 processors, Intel Core i5, 3.1 GHz, 4 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H, 277.5 MB
USB Device: Hub
USB Device: 1861
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: iPhone
USB Device: MFC-J6910DW
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 25.1
Also located,
Diagnostic Messages
Powerstats for: iTunesHelper
com.apple.iTunesHelper 11.2.2 (11.2.2) <D9314C39-EAF4-37E6-B8D8-2731175CD7B2> /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iT unesHelper
Powerstats for: iTunes...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me! -
HTML animation effects doesn't work after last update
After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil -
My Ipod no longer appears in the list when plugged into my computer. As a result the autofill button is gone and I cant update songs to my 1st generation Ipod shuffle. This came about after last update. It's as if the system doesn't recognize my Ipod although I continue to get the message that the Ipod is syncing and the system signals me when the syncing is complete.
My main concern is how do I go about autofilling now?I said to click on the button NEXT TO (to the right of) the Settings button, which should say "On This iPod" in the current version of iTunes. The Settings screen is what iTunes is currently showing so clicking on Settings again will not change the screen.
In previous version of iTunes, you also clicked on the "tab" next to Settings to get a listing of the shuffle's contents, and the Autofill button. It was just called something else instead of On This iPod (I think it was "Contents"). So the procedure itself has not changed in the current version of iTunes.
I have a 1st gen shuffle, and that's how it works... -
Battery drain after last update (5.4.0.4165)
After last update battery consumption went up to 40%, reinnstalled and it dropped to 26%. But that is still way too high. Especially since I barely use it on my phone..
Sony
Xperia Z3
D6603
Stock Android 5.0.2
Mobile 3/4g and WiFi
Skype v. 5.4.0.4165
Attachments:
Screenshot_2015-06-09-12-38-28.jpg 351 KBHello, skypeisawfull-,
Thanks for submitting feedback about the battery life of Skype for Android. The developers of the app are making great strides to improve the functionality and other aspects, including battery life, so that it runs better for its users!
Skype, by nature, does use more battery than many other apps. It should be understood that it has to constantly contact Skype's servers in order to receive incoming call, chat and contact data. You can reduce the amount of battery usage by closing some other apps that you do not use, reducing screen use time, ensuring that you are in areas with good reception (because cell standby greatly reduces battery) and rebooting the phone after a day or two can make a difference in your battery life.
Remember that the development team has surely made it a priority to make the app consume less battery and kill off the bugs that cause that. They probably have more in store, so just you wait and see! Things could be looking good! With you posting this, they'll take notice and probably work to reduce that 26% usage to something lower in later updates!
Thanks for the feedback - keep 'em coming!
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me! -
My iTunes won't open after last update.
My iTunes won't open after last update. Can anybody help me?
I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
https://discussions.apple.com/thread/3800524
Oliver -
Gdesklets broke after last update
gdesklets broke after last update
Traceback (most recent call last):
File "/usr/bin/gdesklets", line 3, in <module>
from main import client, DISPLAY, HOME, USERHOME
File "/usr/lib/gdesklets/main/__init__.py", line 3, in <module>
import utils
File "/usr/lib/gdesklets/utils/__init__.py", line 11, in <module>
from ErrorFormatter import ErrorFormatter
File "/usr/lib/gdesklets/utils/ErrorFormatter.py", line 4, in <module>
import vfs
File "/usr/lib/gdesklets/utils/vfs.py", line 24, in <module>
log("Using urllib, because gnomevfs isn't available")
NameError: name 'log' is not defined
My ignored package list:
warning: firefox: ignoring package upgrade (4.0.1-1 => 5.0-1)
warning: python2-sip: ignoring package upgrade (4.12.2-1 => 4.12.3-2)
warning: sip: ignoring package upgrade (4.12.2-1 => 4.12.3-2)
warning: xulrunner: ignoring package upgrade (2.0.1-3 => 5.0-1)
Last edited by jeff story (2011-07-24 22:01:03)Back2Cali wrote:
Try rolling back to the older CUPS. It seems several people on the forum have issues with CUPS now
Well, this is impossible since I don't have the old 64bit packages on my harddrive....
It's not impossible, you can always use CVS to get the old versions of PKGBUILD & Co. You can read about it in the wiki
I don't know how much packages are needed for the downgrade but you will need at least cups and libcups:
libcups:
there is only a PKGBUILD (no additional files) so I think this should do it (back to 1.2.9)
cups:
there are more files than just the PKGBUILD, but most of them haven't been modified since a long time except PKGBUILD (9 days ago) and maybe fr-template.patch (3 weeks ago), so most important should be this page.
With these information/files you can recreate the lost/old packages yourself. Copy /var/abs/lib/libcups and /var/abs/daemons/cups into /var/abs/local and modify the PKGBUILDs according to the CVS diff entries mentioned above and type makepkg. AFAIK this should be enough.
If you are lucky (and don't use abs too much, last maybe a month ago or so) then your abs-tree might still contain the old files and you can use them without modifications .
Maybe you are looking for
-
Hello to all! i have a requirement to make a query that will bring me report for Sales Per Customer the desired fields are the following CardCode CardName --, (Select sum(T6.LineTotal) from inv1 t6 where t6.docentry=t0.docentry) 'Price Bef. Disc.' ,
-
PDF attachments are showing up as WORD doc attachments
For some reason, my Gmail program shows PDF attachments (that were created using Adobe) as a WORD attachment? When I double click on the attachment, it tries to open in WORD and just shows gobbledygook. Yet, if I don't try to open it and save it to
-
KM Repository DB Table(s)
Hi, I would like to know which database tables are being used to store KM data when you choose "DB" as repository. Thanks in advance. M. Aghattass
-
Hi expets, When trying to open attachment of an work item(which is a pdf) the system opens a transaction and generates pdf and saves it in the local path c:\documents and settings\user2\test.pdf but while trying to open it trys try's to open the path
-
Please HELP! Safari closes on opening any files through email or online class
Basically I think anytime I try to download it closes, I tried to download adobe for apple off the site and it even crashed then. Any attachment through email, or anytime I try to open up my homework online, it just closes on me. Here is the error re