IPod car stereo  Interface problem

Ever since I downloaded the iPhone software version 3.13, the music plays very poorly or not at all through my car stereo interface. I have a Peripheral Audio Gateway which works fine with our other iPods. What can I do to fix the problem? Is there a way to remove the newest software and go back to the previous version?

See if you find anything here...
http://www.chrysler.com/index.html
btabz

Similar Messages

  • Ios 4.2.1 won't connect to 'made for iPod' car stereo

    I wish I'd NOT updated from ios 3.1.3. Then I could listen to music on my iPod (touch, 2nd gen, 8gb) in my car via the car stereo (Kenwood KDC-W6541U) USB port with not problems.
    Ever since I updated to ios 4.0 (and 4.1 which didn't solve the problem either) whenever I plug my iPod the car stereo display flashes 'reading'. I've checked the Kenwood website, but there are no updates for the stereo.
    I'd hoped the 4.2.1 update would've resolve the problem, but it didn't. The main reason I'd bought an iPod was to listen music in the car!
    Recently I've not bought anything from iTunes, whats the point as I can't listen to it.
    I'm getting disillusioned. I've tried plugging/unplugging, switching on/off, resetting, etc, etc with no success. Anyone got any ideas?
    Apple, get this sorted, please! ios 3.1.3 worked fine.

    I HAVE THE SAME PROBLEM. i have a kenwood kvt-514 head unit. once i updated my ipod touch to v4.2.1 some songs didn't play, no album artwork was displayed, ect. i tried doing all of the above and nothing. hopefully apple is working this out.

  • IPod Car Stereo Connection

    I just recently bought an aftermarket Kenwood, iPod compatable stereo for my car. When I plug in the iPod to the stereo (it has the modulator {direct connection, not FM}), all it plays is the first song on my list. I can't go from one album to the next. Did I set up my iPod wrong, or is it something else? Please help...thank you!!!
    Chris
    H. Packard   Windows XP Pro  

    I just spoke to Apple tech support. The techie said that they changed the pin configuration and that he did not know of any workaround for in-car charging. He also said that the 4th gen Nano (out of the box) and the 3rd gen Nano (after the latest software update) will no longer go into standby mode when connected to non-apple interfaces. He also said that they are working on it and the standby mode should work again after the next software update.

  • Factory ipod/car stereo link - not recognized

    i have a new mini cooper and got the factory ipod sync for the car stereo (same one as bmw, they make mini's). hooked my new 60gb video ipod up and was happy as a clam using it. until last week. when it suddenly stopped recognizing my ipod. took my car in for service and the sync works fine on everyone's ipod in the shop, except mine of course. ipod strangely works fine in all other ways including syncing with my mac mini. of course did all the resets and restores. and no i didn't change anything or download a new ipod updater when it stopped. and yes it is up to date. bringing it in to an apple store this week, will let you all know. but from phone calls they sound as mystified as i am. anyone else have similar?

    Hi mate the same thing has happened to me in my Audi it was working fine and then nothing just charges . My wives ipod mini works fine but not my 60 gb .
    PLEASE HELP US WE ARE VERY SAD POD USERS

  • IPod Chrysler car stereo interface

    Anyone know / hear anything about this yet?
    It was announced back in the beginning of the year and supposedly available from dealers this spring. Well, spring has sprung and no-one seems to have ANY info on this. I can't wait to loose my lousy sounding FM transmitter and control my iPod from my steering wheel controls. Let's go Chrysler... we're waiting...

    See if you find anything here...
    http://www.chrysler.com/index.html
    btabz

  • Ipod + car stereo

    if i have a stereo that is not "ipod ready", is the fm transmitter my only option or is there an adaptor that i can buy to make my current deck "ipod ready"!??!!?

    There is a XM satilite radio adapter you can buy

  • Car stereo link problem

    Since updating to iOS 8.0.2 the player on both my vehicles won't control remotely. I does in a limited way. When the phone first plugs in and I select the "iPod" as a source the music won't play unless I command it to from the iPhone. It does this on both my new My Link and my old low tech 2 year old truck stereo. Has anyone else seen this? Any fixes?

    Reset your network settings and repair with your vehicle. You will have to re log in to all WiFi hotspots and repair all Bluetooth devices.
    Settings > General > Reset > Reset Network Settings

  • Kenwood Car Stereo iPod Interface

    I have a Kenwood Car Stereo head unit and their iPod interface (KDC4531W and KCA IP500 respectively) which work really well.
    Tonight I had to hard reset the iPod (via Menu and Play) to get the system to recognise the iPod following stopping and starting the car. The head unit displayed E-60 as the error code. I'm sure this isn't a deep sleep problem, unless the timer is set at less than an hour...
    Following the reset it all worked OK...
    Anyone else seen this? Anyone know what caused it?
    (I've just downloaded iTunes 6 and am using iPod Software 3.1 in the iPod)
    Thanks
    Rob

    Thanks Paul - at least I know its not me...
    I'm going to try reformatting & syncing my iPod to see if that works.
    I assume the IP500 will work with the new ipods - it certainly works with our Mini and 4G one. Suggest you email Kenwood support, they're really helpful!
    Rob

  • Panasonic Car Stereo - iPod problem

    I've been using my video iPod with my Panasonic car stereo via the CA-DC300U cable. (The receiver has a terrible iPod interface, but that's another point.) Until recently, it's worked perfectly. Now, for no obvious reason, the stereo won't always recognize the iPod (sometimes fixable if I unplug the cable and plug it back in) and it has stopped charging the iPod. It won't recognize the iPod at all if the battery is drained. The iPod works great with my Macbook, so I don't think it's the iPod. But this problem seems to have started about the time of my most recent software update. Anybody have any thoughts or similar problems?

    Hello. I have the same problem for two weeks.
    My player of DVD for the car does not recognize my Ipod even if reset both.
    That I can do in the matter?
    The DVD accepts other Ipods so the problem is come from that.

  • Any ideas on problem with ipod and alpine cde-9881 car stereo

    I have an ipod 60gb v 1.2.1 and a new Alpine car stereo with Ipod connecting cable. When connected, the stereo message reads IPod searching. It never assumes control of ipod,or quits searching. I have reset and restored my ipod, had the apple geek at genius bar check it out. My ipod does not play on the alpine ipod ready stereo in my husband's car, nor the stereos in Car Toys. My husband's 30 gb ipod plays on the stereo in his car AND my car. Help! Anyone have any ideas on how to fix this problem? Alpine is telling me it could be a software problem with my ipod, and to revert to an earlier version of itunes. But my husband's ipod works in my car. So I did a restore using his computer and itunes....no luck. am interested in any ideas on a possible solution!!
    Thanks in advance
    md

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • IPod and JVC Car Stereo random resetting problem

    Hey all,
    I recently bought my first iPod (yay!), a 30gig 5th generation. I also had a JVC KD-PDR30 cd player installed in my car so that I could hook up the iPod to it and eliminate all the random cds cluttering up my vehicle. It works great -- most of the time... the last few days I've my iPod has been randomly resetting itself while connected to the car stereo -- it's connected through the dock port (not the headphone jack) and works 90% of the time. Even still, this is frustrating. I almost want to just connect it from the headphone jack to the aux in on the car stereo. Anyway, it only seems to do this while it is connected to the car stereo. I've never had a problem with the iPod resetting while using it outside of the car. Anyone have any suggestions? Thanks Apple community!!!
    Theo

    I had the JVC radio with iPod connector which worked just fine for my old iPod. When I upgraded to the iTouch I had to put in a new JVC stereo. The old version does not work with the iTouch (the same issues prev. stated). The new stereo has an USB hookup on the front. It plays the iTouch, but occas. the song or book will skip. At first I thought it was when I turned corners, but realized it was just random. A bit annoying. I looked at other stereos, but I could not get the iTouch and Sirus in the same unit, except for the JVC. If you can live without your iTouch I would wait until JVC or Apple address this issue. I could not live without either (I hate commercials!), so I made the jump to the first generation. I know better.

  • HT1369 I have an Alpine car stereo with USB port for my iPod, most recently an error message apperared.  Now I am having a problem connecting to iTunes  via my computer, with windows 7. The screen on my iPod still shows the Alpine logo and "Ok to Disconne

    Please help. My iPod froze up after playing in Alpine car stereo. The screen shows the "Alpine" logo and the message "ok to disconnect" I have tried to connect to my PC with little success.  Windows 7 does not recognize the iPod with the error message "device error".  I have run the iTunes Diagnostics but it still does not recognize device as "connected"

    See my reply to "Transferring Tunes" . Suggestion: From what you said, it sounds like you could easily connect this iPod to a Windows computer. Go back to the computer where you have the 3600 songs. Get the files out of the folder where they reside and put them on the iPod as data (your iPod has to be set up for disc use. So you will then have your music on there as the iTunes music AND the data files. Take that iPod to your Mac. Drag those files from the Finder, where you will see them on your iPod, which will mount like an external disc. (It was set up for disc use). Drag those files to your iTunes Library in the Source List (on the left) in iTunes. You might have to drag them into some interim folder on your harddrive first, like the Music folder within your User.
    eMac iPod2G iPodPhoto3G Shuffle   Mac OS X (10.4.5)   MacPlus,SE30,PB520,PB5300,iMacSE 10.3.9,PBG4 10.3.9

  • IPod Classic connectivity to Car Stereo problems

    I have an iPod Clas. The software version is 1.1.2.  My new car stereo will not recognize anything before 1.2.  Is there anyway to upgrade the software version of my Classic?
    Thanks.

    jfallon_bonedoc,
    If iTunes does not see any firmware updates for your model of iPod classic, and you are positive your iTunes application is up to date, then I'm afraid there is no way to update to another firmware version.  Sorry.
    B-rock

  • Connecting iPod video to Blaupunkt car stereo

    Blaupunkt sells an adapter to connect iPods to their car stereo. Part number: 7607540500. It is compatible with the factory (Blaupunkt sourced) car stereo of my Fiat Panda model year 2005. The car stereo 'sees' the iPod as a Blaupunkt CD changer. It works well with the previous iPod but absolutely no-one can tell me if will work with the current video iPod that I'd like to purchase.

    I talked to Blaupunkt support in the states and they say that they are aware of the problem! Now what kind of an answer is that? I agree with you, Blaupunkt should get on this problem and fix it. Blaupunkt catalog actually states that the Ipod interface works with any Blaupunkt head unit with CDC control since 1998+. On the interface box it says 2001+. The simple fact is they should get there "stuff" together and fix it!

  • Working iPod 5th Gen with Alpine Car Stereo CMA9855

    Hi
    Just wondering whether anyone has tried using the latest iPod with Alpine Car Stereo CMA 9855 with an iPod interface.
    Problem - not all artists show up on the stereo screen + can't get quick search to work. Is it an alpine stereo software problem?
    Appreciate any feedback.
    Dom

    I have a Clarion Pro Audio deck/Clarion IPOD connector. My system worked great up until IPOD SW 1.2.
    Before, I could control the IPOD on the face of the IPOD. Now, the IPOD works, but it's in locked mode, so I can't browse artists/albums any more. Baiscally, I have to hit RANDOM TRACK mode, and hope I land on a CD I'm in the mood for.
    Very frustrating, although GAPLESS is great. (FINALLY!!!!)

Maybe you are looking for