IPod Classic 120GB is not recognized by computer even after hard reset

I have an iPod Classic and it recently would act like it was playing music but was not in reality. I ended up having to hard reset the iPod. Now that it has been reset it will not sync with my computer. I hook it up and the screen reads +do not disconnect+ my iTunes will not recognize that there is an iPod connected and when I open My Computer it often freezes or tells me that I need to reformat the iPod for it to be recoginzed by Windows. I do not have the option to format it to FAT 32 though. What do I do??

This is my iPOD
iPod (touch wheel)
All iPod (touch wheel) models have a FireWire port cover. Scroll wheel models don't, and dock connector models don't have a FireWire port. The iPod (touch wheel) model controls look similar to the iPod (scroll wheel) but the touch wheel itself does not turn. iPod (touch wheel) models are considered second generation iPod models. The top of an iPod (touch wheel) model is shown here:
I went into the link and looked at the 5 R's. Nothing there. I couldn't restore the iPod if I wanted considering I would need to connect my iPod to the Computer which I cannot do.
Putting iPod into Disk Mode - did not work - I tried the click wheel instructions, but it did nothing at all....it was totally unresponsive. then I went and did the *If you have an older iPod model without a Click Wheel* instructions get to the fourth step where it says
*When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.*
but the Disk Mode screen does not appear. It goes straight to ""ok to disconnect"
Is there something else going on or something trivial that I could be doing that could be messing up these instructions?

Similar Messages

  • Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

  • Ipod classic 160 usb not recognized

    Ipod Classic 160 (not recognized by computer) and under Ipod Diagonistics (no Ipod found). I have two other Ipods which I-Tunes and my computer recognizes.  I have reset Ipod to no avail. Because I am unable to connect to I-Tunes with the Ipod I am unable to restore or reset.  I have watched all the YouTube videos and followed each.  One thing that is strange is it will not test or disconnect from disk mode.  I really enjoyed this I pod and hope one of you can resolve this problem for me.  Thanks

    Howdy spacecraft24,
    Welcome to Apple Support Communities.
    From what I gather, your iPod classic isn’t recognized by iTunes on your PC. Take a look at the article linked below and try running through the troubleshooting suggestions that it provides.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Take care,
    -Jason

  • Ipod Touch 3rd Gen - not recognized by computer or itunes.  Shows cable pointing to itunes logo.  Can't reset it.  Doesn't work at all.  Have tried all the supposed fixes on the apple site with no luck.  It suggested asking other users !

    I have a 3rd Generation ipod touch that is not recognized by itunes or my computer.  My itunes works with other apple devices I own.  I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off.  I can't reset it.  Have tried to use the suggestions on the apple site to no avail.  Any suggestions ?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • IPod with click wheel not recognized by computer and doesn't show up in itunes. Have went through all the suggested tips and its not the cable.

    ipod with click wheel not recognized on two separate laptops. Checked the cable and newer ipod shuffle works fine.  Ipod will play already loaded music and play from a dock.  Have went through the 5Rs and still not working. Any help appreciated.

    Checked the cable and newer ipod shuffle works fine.
    You're not trying to connect the iPod with click wheel using the short USB cable for the iPod shuffle, are you?  If so, that won't work.  The shuffle uses its headphone jack for the data connection.  All other iPods use the dock connector, using a standard docking cable.

  • I downloaded an Adobe plug in and it will not update my computer even after a restart.

    I downloaded an Adobe plug in and it will not update in my computer even after a restart.  Any ideas?

    to do an up-date you will need the original app. Then you can up-date

  • My iPod classic 120GB is not synching with my windows 7 computer. When I plug the iPod into the computer the latter makes a noise but no recognition takes place on either machine. Any suggestions please?

    A

    Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod Classic 160 GB not Recognized by Itunes

    Itunes does not recognize my Classic Ipod 160 GB. I have tried all the suggestions offered by apple. Any advice?

    I had the same problem with my iPod classic 80 GB. I spent an hour on the phone with Apple support this morning. It is interesting that I could still sync my iPhone and an older iPod, just not the Classic - so I suspected either a hardware or Mac software issue. The solution (I think) is that the permission in OS X for the device is not recognized. After restoring my iPod to factory settings, and completely deleting and reloading a new copy of iTunes, I am now able to get my Mac to recognize this iPod. Following the instructions found here:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8342.html
    I was able to add permission for the "administrator" to have read and write privileges on this device. That seems to have solved the problem. Thanks to Ryan at Apple Expert for the troubleshooting. Good luck!

  • IPod Touch 4th Gen not recognized by computer

    I have an ipod touch 4th generation and when I plug it into my computer, which is a mac version 10.6.3 it makes a sound and starts charging, but it is not recognized by the computer and will not connect to itunes.

    See:
    iOS: Device not recognized in iTunes for Mac OS X
    Do not omit the Additional Information Paragraph.

  • IPod Shuffle (2nd gen) not recognized by computer

    I get the following message when attachind my iPod to my computer; USB Device not Recognized...."One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it"
    There is a second USB port on my computer, however I get nothing when attaching to it.
    The iPod works and is recognized by my wife's computer. Clearly, something has gone awry in my computer. Anyone have any input on how to solve??
    E-Machines   Windows XP Pro   time for a new one!

    Have you tried restarting your computer? That fixed my issue with that once.
    Also, have you gone through these iPod troubleshooting steps?
    The Five R's
    -Kylene

  • IPod classic 5th is not recognized by operating systems or iTunes

    I have an iPod Classic 5th generation A1136 (80g with video).  Recently, right around the time of the new iTunes release, my iPod is no longer recognized by my Mac (in disk mode) or in iTunes (in any mode).  It still charges when connected to my computer.  It plays music (and video) in all of my docking stations.  It isn't recognized by the machine.  I have tried iTunes on other machines.  I have tried the 5 R's.  I have put it in disk mode.  I have reset the iPod.  I have reinstalled iTunes on my Mac.  Every solution i have read about, I have pretty much tried.  Could this be a hardware issue?  If so, what sort of issue would produce these symptoms.

    You have a 4th gen Ipod.  First reset the ipod , then put it in disk mode. then plug it back into computer. That second icon of the folder  means it can't find an OS.  You might have to take it apart to see if you have the hard drive seated correctly and the hard drive ribbon. If none of this works, uplug and restart it, hold you ear to it and listen to see if you hear a clicking or buzzing sound. If you do the hard drive is bad. To do a reset -toggle the hold switch on the end by the screen then press and hold the center button and the menue button at the same time-then as soon as the apple comes up - press and hold the center button and the botton of the click wheel, disk mode should come up.  Plug back in and see if it comes up in itunes do a restore. The bottom of the click wheel is play- pause. It's also what you hold to shut it down.

  • Ipod classic 2nd generation not recognized on itunes

    So i still have an old ipod 2nd gen for windows. though i have a firewire and the mini port on my computer running windows 7, it does not recognize my ipod classic 2nd gen. i am trying to put stuff on it but nothing. any ideas if i need an old version of itunes or what i can do??

    Hello 44elite444,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot your iPod issues. There are links there for additional steps if you have a Mac OS X or Windows computer.
    iPod not appearing in iTunes
    Regards,
    Jeff D. 

  • Ipod 5th generation 30gb not recognized by computer , you'll make my dreams come true !

    Hello my name is Anna , 4th year Computer engineering student , from spain.
    as i said when I connect my ipod it says USB Device Not Recognized ,
    any solutions please ?
    tried alot nothing worked

    Does the computer have iTunes installed?
    http://www.apple.com/itunes/
    What version of Windows?

  • Ipod 4g touch is not recognized by computer and wont turn on or restore

    I bought and ipod touch off a friend because he had drained the battery and forgot his passcode. I charged it in my car and he entered the wrong passcode too many times so it said ipod disabled connect to itunes. And then it shut off. I have not been able to turn it on since. I tried connecting it to my computer. My computer won't even recognize it. I tried to restore it. Nothing happened. And then while i t was still plugged in, the apple logo screen flashed on and off for about 5 minutes. After that, nothing. Any ideas? I called apple support and they couldn't help because I don't have the serial number. For some reason it is not on the back of the ipod.

    Start her:
    iOS: Not responding or does not turn on

  • Ipod classic latest version not recognized in itunes also downloaded 400 plus songs, can play them in itunes but can not download on to ipod any idears /

    latest 6th gen 160 gb ipod not recognized in itunes, have done all the checks, has been confirmed in itunes sync, Also down loaded 470 new songs into itunes,Can play them,but can not down load back into my ipod, any thoughts? Question,

    See my answer under "iPod 160GB not recognized". The steps I took to fix this problem include completely uninstalling and then re-installing iTunes 9.0.2, restoring my iPod to factory settings while in disk mode, following the Apple instructions of repairing the permissions (outlined in my other post), and even after all that my iPod "crashes" after syncing more than 300 or so songs. I hope that Apple will come out with a real fix for this problem soon. Best of luck.

Maybe you are looking for

  • ResultSet merge

    Does anyone know if there is a way of creating one result set from two? I need to write a query to return results from two databases that can not talk to each other (!). The results are only seen after some java fantasticness has turned them into an

  • Problem in displaying arabic

    Hi I am having a problem in displaying arabic language. The problem is that sentences are not being displayed in correct format. That is they are displaying in the format like left to right languages and not in the format like right to left languages

  • Error messages and corrupted PDFs

    I was hoping someone in the Abobe Community could help me with a technical probelm I am having.  I frequently scan documents with my Brother or Epson printers and send them as email attachments.  Recently the files are fine when I scan them but when

  • Disable application switch to browser after clicking link in Mail

    When I click a link in an email message, my Mac automatically switches to my browser (Firefox) to view the linked page. How can I have the link open in the background but stay in Mail? I would like to be able to click links in email messages but keep

  • Roxio Media Manager Install Problem

    I get the following error message when I try to run Roxio Media Manager from the Desktop Software: "MediaManager9Module has stopped working correctly.  A problem has caused the program to stop working correctly.  Windows will close the program and no