IPod classic 160 last effort before returning it...

After my Archos PMA400 packed in - it was merely 5 years old... sigh ... I made the horrible mistake to replace it with an iPod classic 160. Guess what...
After updating iTunes and the iPod firmware to the latest releases, it still won't sync more than 20 songs in a sync.
Turned off covers, turned off mountable volumes, but it made things worse..
Anything else I have to try before leaving the Apple universe once and for all?
Honestly, I am deeply disappointed. Visited the London Apple Shop only to be told I need an appointment for talking to an enginner... well London is a two hour trip for me and being treated like that is a PITA...!
Apple, get this sorted out!

Here is possibly a strange solution for you....
I noticed that when I first tried to sync my 160 I had some issues...
Upon looking at the device, I noticed the clock never set itself.... Since you have 2 smart devices talking to one another, some times they do need to know they have the correct time etc to communicate...
After manually setting my iPod Classic's date and time things have been a cinch and no issues...
Give that a try or see what the clock says in your ipod... Also note that I had to restore after setting the clock because the first syncs really crapped out and windows was always complaining about possibly bad items on the disc...
Good Luck Man!

Similar Messages

In ITunes, my library was about 55 G. I have a Ipod Classic 160 G. I synchronised my IPod on ITunes and I checked the tag Convert songs with a throughput greater than 128 kbit / s ACC before synchronisation I took maybe 6 hours to synchronise, and af

In ITunes,
my library was about 55 G. I have a Ipod Classic 160 G. I synchronised my IPod
on ITunes and I checked the tag Convert
songs with a throughput greater than 128 kbit / s ACC before
synchronisation I took maybe 6 hours to synchronise, and afterward my library was
about 42 G. All my tunes, more than 9500, seem still be in library. Most of my
library is from music purchased in ITunes store along with copies on my old CDs
an some MP3 files from other discs. This is good for me but what happened?

This is good for me but what happened?
I don't understand the question... Did something happen that you think should not have happened?
It took such a long time to sync, because iTunes was converting songs with bit-rate higher than 128 kbps "on the fly" while syncing. That takes much longer than just syncing the songs.
Also, since you have so much space on your iPod (compared to the size of your music library), you should not use that "convert to 128 kbps AAC" setting. For songs that are encoded higher than 128 kbps, the conversion reduces sound quality. You may want to uncheck Sync Music and Apply, to remove the songs on the iPod currently, and then sync it all again without the "convert" setting checked this time.

Ipod classic 160 using 30GB laptop

Is there a way to import my extensive cd collection (at least 160GB worth) to my ipod classic 160 using a laptop that has only 30GB? Can I somehow use my 1TB external drive to help get all the music onto my ipod? So far everything I import to itunes goes directly on my laptop which has been quickly overloaded. Can anyone give me an idea of what to do here. This was so easy using non apple mp3. There must be a way!

First, there is no need to convert mp3 files to AAC, iTunes and iPod support mp3 just fine. So, you can rip your CDs in iTunes in the mp3 or AAC format, or any of the formats supported by iTunes.
Second, it sounds like you’re interested in moving your library off of your laptop and onto your external drive, no problem! That makes it easier to help if that is your ultimate goal. But just to make it clear, there are a few considerations you need to be aware of:
a- iTunes has a “Consolidate Library” utility that lets you port all your music files to a new location. Doing this leaves the original music files in place and creates copies in the new location. So, you need to decide if you want to keep the originals or delete them once they are all copied to the external drive. You can make that choice later.
b- When you consolidate your library to your external drive, iTunes will have to manage the organization of the files and folders. So, if you’re using your own way of filing your mp3 files and not letting iTunes manage it, then consolidating your library will copy all your files into the iTunes organization on the external drive (but your original files will remain where they were).
c- Having an iTunes library on an external drive works just fine but there can be a few quirks. If you have a PC, sometimes Windows decides to change the drive letter of your external drive for no apparent reason. Also, if you start iTunes and it can’t find the external drive (disconnected, power off, new drive letter, etc.) then iTunes will open with a default library, which it expects to be on the C:\...\My Music\iTunes location. If you don’t have a library file in that location, then iTunes will create one and open up with a blank library. However, both of these risks can be handled easily and are recoverable.
d- You can have multiple iTunes libraries, such as the one on your external drive and perhaps the original library on your laptop. However, all libraries are independent so when you change one there is no change to the others. If you manage multiple libraries, you need to decide up front which will be your primary library. Since you have a capacity limitation on your laptop, your primary would be the external drive. The reason to decide this is so that (1) if you auto-sync your iPod, you want it to reflect what’s in the primary library, which may be different from the one on your laptop, and (2) when you add new music, make tag changes, make new playlists, etc., you make sure you’re doing that to your primary library so that the changes get put onto your iPod. So, if you decide to keep the original library on your laptop as an auxiliary library, then you should not auto-sync your iPod with that library open since over time it will differ from your primary library on your external drive. Also, when adding new music, do that with your primary library open, not the one kept on your laptop. With some experience, you can learn how to add new music to your external drive, then also add it to your laptop, but I won’t get into that now.
So, if you’re ready to go through with this, follow these steps:
1- Make a backup copy of your "iTunes Library.itl" file. By default, this is located in your C:\...\My Music\iTunes. Keep a copy of this file in a safe place just in case something goes wrong with the consolidation (see step 9 for recovery). You should make a habit of backing this file up anyway since it contains all your playlists, song ratings, and play history.
2- Create a folder on your external drive where you’re going to put your music files. If you have some music already on the external, I don’t recommend putting your new library there, create a separate folder (e.g. E:\iTunes Music). If you already have some music on the external drive that you want in iTunes, you will add those at the end of this process.
3- Start iTunes and go to your iTunes preferences (Edit/Preferences, then click on the Advanced tab). Next to the “iTunes Music folder location” window, click on the “Change” button and navigate to the folder you created in step 2. iTunes will put up a message indicating something like “updating library” but that doesn’t actually move your library.
4- While still looking at your iTunes preferences, make sure these two options are selected: "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
5- Select the iTunes command Advanced/Consolidate Library. iTunes will warn you that this is a big change, so let it rip if you're ready. iTunes will copy all your laptop’s library to the new location on your external drive. This may take awhile if you have a large library.
6- When the consolidation is complete, right-click on any song and select Get Info. Check to see that iTunes has the native file stored in the new location on the external drive.
7- This step is optional, but I recommend doing it to help prevent problems with drive letter changes, and it makes your iTunes library completely portable to other Windows PCs running the same version of iTunes as your laptop. Close iTunes and go to the C:\...\My Music\iTunes folder. Move (don’t copy) the "iTunes Library.itl" and "iTunes Music Library.xml" files to your external drive. You can put them anywhere but I recommend a folder that is easy to see and understand (e.g. E:\iTunes Library Files). Now, hold the Shift key while you start iTunes – keep holding the Shift key until you are prompted to “Choose Library” or “Create Library”. Select “Choose Library” and navigate to you put the "iTunes Library.itl" file on the external drive. iTunes will start up as usual. Note that holding the Shift key while you start iTunes is how you toggle between libraries, and how you can create a new (blank) library. Also, iTunes remembers the location of the last library it opened, so you don’t need to use the Shift key to re-open the library you last used.
8- If you had music on the external drive that you want to add to iTunes (now that you have extra capacity on the external drive), then simply drag and drop these files directly into your iTunes library. iTunes will make copies of these songs and organize them in the new folder structure you’ve set up – you can delete the original copies of these songs once you confirm that they’re new location in iTunes is set.
9- If any of the above steps got messed up, or you’re not happy with the results, then simply restore the copy of the "iTunes Library.itl" file you backed up in step 1 (put it back in the same location), then hold the Shift key while you start iTunes and navigate to the original "iTunes Library.itl" file location on your C: drive.
10- If all is well and you don’t want the original files on your laptop, then delete away. If you decide to keep the original files as an alternate library, then do the same as in step 9 to restore the original library. You can then toggle between libraries by holding the Shift key while starting iTunes and selecting the appropriate "iTunes Library.itl" file. Note that to change from one library to another, you need to close iTunes and restart it with the Shift key being held – you cannot change from one library to another with iTunes open. Also, sometimes it helps to put something in each library so that you can easily tell which one you have open. Maybe create a folder in the iTunes source column called "Primary" or "Secondary" so you can tell when you open one library vs. the other.
11- If you launch iTunes expecting it to open the library on your external drive and it comes up with an empty library, or the original library, that may mean that your external drive is not being recognized by your laptop. Check to make sure it is active, then re-start iTunes with the Shift key and select the "iTunes Library.itl" file on the external drive to return to your primary library.
12- If you have other PCs with the same version of iTunes, you can connect your external drive to them and use the Shift key as you launch iTunes to select your library. This makes your library portable to other computers – cool huh?

Ipod classic 160 , iMac tiger 10.4.11 , itunes 9.1 not syncing & freezes up

Im ready to yank my freakin hair out. I have called and talked with itunes support and got nowhere. I have downloaded , upgraded , restored and even returned 2 ipod classics to see if they were the problem.
When I sync it gets to about 1-3 gb and freezes everything (ipod , itunes , computer) I have put up with everyone acting like its something Im doing. It always ends up saying ( cant read or write to the ipod ) This is ridiculous!!!!!!!!!!! I have 15,500 songs and cant use them mobile at all, this *** after my girlfriend spending $280.
What is going on?????? , and is there going to be an itunes up date for this sooner than later or should I return it before its to late? A Best Buy saleman said something about many complaints about this and that I should be able to expect an update soon... so I have a new 160 sitting in a box Im afraid to open.

I'm not sure that if this is exactly the same problem you're having but it sounds similiar...
I have just purchased a new ipod classic 160, and have attempted to sync it with my itunes 9.1 library. It managed to sync about 3 Gb and then an error message came up saying "Attempting to copy to the disk "iPod" failed. The disk could not be read from or written to." I then tried manually transferring the music and was successful with some of the music, but with other tracks the same error message came up. I performed a restore on the iPod, as I initially formatted it on a PC, not my Mac, and thought this might be the problem. Unfortunately this didn't fix it. As far as I can see there is no pattern to the tracks that it won't load on (well not to my eyes anyway). I would be grateful for any suggestions as I'm off traveling in a few days time without my laptop and can't imagine myself without my music collection!

Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file. Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing even though I have the auto sync feature turned off.
This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer. Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar. Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
Then if I try and play the music I just transfered, the iPod says there is no music loaded.
Ideas?

IPod Classic 160 GB doesn't work for audiobooks in BMW X3 F25

Hello
I have been owning a 160 GB iPod classic for a while now. I have newly acquired a BMW X3 (2012 Model, F25). The problem is that when listening to audiobooks, the iPod doubles or triples the speed (and pitch) when I return to the car after having parked. So it runs fine at first, then I stop and park the car and return and then it sounds like Donald Duck is reading to me ;-)
The car comes with the USB interface to which once can connect media players like the iPod. I am using the original BMW "Y-shape" cable that has once connection on the iPod that then splits into an USB and a 3.5mm jack. I also tried cables from Belkin and the cable that came with the iPod, but all to no avail.
It is not the Audiobook faster/slower function of the ipod that is activated because that would not change pitch, it's like "the record is turning too fast", you can see the seconds in the car's display movig much faster than at a second's pace. The iPod subsequently retains this increased speed even if not connected to the car anymore and can only be slowed down again by resetting it.
I onw an older iPod photo 80 GB which does not exhibit this behavior.
The iPod classic 160 is at the latest software level and so is the car.
Any ideas?
Regards
Chris

Having the same issue. See https://discussions.apple.com/message/23993137#23993137.

Ipod classic 160 not visible in tunes 12

My perfectly functioning ipod classic 160 gb is invisible to itunes. It shows on the ipod screen it is connected and it shows on the imac screen as an ipod. In itunes it does not exist. It worked perfectly with itunes before the upgrade. I have seen the device bar and my iphone 5s displays there normally and functions perfectly. When only the ipod is plugged in, there are no devices in the bar and the itunes menu for device is greyed out.

If you have not, disconnect all USB devices (including any hubs). You can leave standard keyboard/mouse connected, if used. With iTunes running, connect iPod to a direct USB port by itself. This is to rule out a problem a conflict between connected USB devices, or a lack of power on the USB bus for all connected USB devices. If you already tried that, or it does not help...
Since the iPod appears initially in iTunes, the problem may be a "feature" that recent Windows PCs, with Windows 8 and USB 3.0 ports, seem to have. It is an "energy saver" setting that turns off full power to the USB port if the connected device is deemed "inactive" by Windows. When you connect the iPod, iTunes does its initial sync for a few seconds. That's when the iPod is seen in iTunes. After the sync, iTunes unmounts the iPod's disk. If Windows considers the iPod to be inactive and turns off full power to the USB port, that is when the iPod disappears from iTunes.
If this is the cause, you may be able to go into Windows Control Panels and turn OFF this feature (so USB ports always stay at full power). If that does not work, or you can't find such as setting...
Alternately, you can Enable disk use on the iPod. With disk use enabled, the iPod's disk remains mounted by the system until you Eject the iPod in iTunes, so the port remains at full power. This may be difficult, if you don't have enough time to click on the iPod in iTunes and check the box for Enable disk use on the iPod Summary settings screen (and click Apply). I'm assuming you have your iPod set to automatically sync your entire iTunes music library. If so, you can extend the iPod's initial sync (when you connect it) by making a significant change to your iTunes music library (before you connect it). If you happen to have some music CDs that you need to import into iTunes, that would work. Add new songs to your iTunes library, and then connect iPod. If you use the Sync only checked items setting, you can uncheck a large number of songs in your music library, connect to sync, then recheck the songs, connect to sync. Making iTunes sync a few dozen songs during the initial sync should give you enough time to go to the iPod's Summary settings screen, and check the box for Enable disk use (and click Apply).
If that does not work (or the iPod still disappears quickly even when there are changes to sync), the cause something else. FYI - It's not because iTunes 12 does not support discontinued iPods. I have an 3rd gen "classic" iPod from 2003, and it works fine with iTunes 12.

How do I get to buy nwe games for my iPod Classic 160 GB?

Hi! My name is Valentin.
I bought an iPod Classic 160 GB, last month. I mean in november 2013.
It only has 3 games on it. I would like to buy some new games for it & I don't know how. I mean I don't know how to look for games that are made only for this iPod... Because, until now I only found games made for iPhone & iPad...
Can anybody help me with this?
Please!
Thanks a lot...
Bye!
<Email Edited by Host>

You cannot buy games for the iPod Classic.

Help with import/drag one photo into iPod Classic 160

Hello - I could swear I've done this before --- I've got my iPod Classic 160 Gb synced to iTunes, and JUST want to drag one little photo onto my iPod (in the left column), but I get an alert & it won't let me do this. Can't you just add a photo by dragging it onto the iPod in the left column? I don't want to totally sync my iPod as I get a warning saying that if I sync for photos, it will replace ALL photos and music with what is in my iTunes library, and I don't have the entire contents of my iPod currently in my iTunes library. Can't I do a simple thing like add one photo? (It's a .jpg.) Thank you very much for any help.
Nick

Thanks again for your suggestion about taking the charger back to the store. We tried it there and the charger itself worked fine (shocker!) so we tried with a different Apple charger and my iPod. And it finally worked! The guy at the store tried to explain to me WHY the charger hadn't worked with my iPod (something about ampere or something) but when I told him that it in fact worked with my old iPod from 2007 he had to agree that it was very strange.
Anyway, they didn't have in stock that new slick Apple charger (small and thin compared to the big squared one I got first) so I ended up buying a Belkin charger that works great. So all's well that ends well!

"This game cannot be launched error" iPod Classic 160 Gb

I have an iPod Classic, 160 Gb. I purchased Sudoku from the iTunes store.
The game downloaded to my computer; and it shows in the iPod Games tab.
It appears to sync to the iPod, but in the iPod's games menu there is no icon for the game (just the black and white dice). When I try to play the game, I get the "This game cannot be launched error" with the prompt to reinstall the game.
Are there any fixes for this? I've tried all the troubleshooting in the support docs, and nothing seems to work.

Thanks for your suggestions; however none of them worked.
I contacted technical support, and the only suggestion they had for me was to request a refund - because for some reason, unknown to them, the game doesn't work on my iPod.
I'm not generally a ranter - I try to be polite to people, in person, on the phone, online - wherever, but I have to say that in my experience, Apple seems to have the worst support of any company with which I have ever dealt.
After being told no less than eight times, by five different representatives from iTunes support, I was referred to technical support, who told me in essence, "tough cookies" (although the representative certainly didn't say that, he was quite polite).
I had to double check that I was talking to "technical" support.
I've been a faithful iPod user for many years; but this experience has certainly soured me. I will have to think long and hard before buying another Apple product if the support I have experienced is indicative of a typical support instance.
Thanks again for your suggestions.

I bought an ipod classic 160, do i need itunes installed to play music?, i bought an ipod classic 160, do i need itunes installed to play music?

Hi, i bought an ipod classic 160, and i am new to this. Do i need to install itunes to play music? I have installed music on to the ipod, and i can see the songs via my pc, but i cannot see the songs on the ipod to play them?
Thanks for the advice

You need to start again.
From what you have told us, it sounds to me as though you have put the iPod into disk mode and transferred music to the iPod using Windows Explorer, in which case you are using the iPod as a simple storage device. However, you cannot play that music - you have to add it to the iPod via iTunes.
So, install iTunes on your computer.You can download iTunes by clicking on this link; http://www.apple.com/itunes/download/
Add your music to iTunes, this becomes your iTunes library.
If you wish to put songs into Playlists, do this in your iTunes Library before connecting the iPod. (Usually, you make changes etc. in your iTunes Library. Only after that should you connect the iPod to it. We can discuss the exceptions to this later if you wish.)
You then connect the iPod to the computer and let iTunes Sync the Library to the iPod.
Once the Sync has completed (you will see a message confirming this), eject the iPod using the eject iPod button in iTunes.
Play the music on the iPod (and in iTunes).
By the way;
you may need to use Windows Explorer to remove the files you previously added to the iPod, as they will be taking up space on it that you want for music.
don't let anyone tell you either "not to use iTunes" or that "you don't need to use iTunes". iTunes is tailor-made for the iPod and it really is the best way to manage your iPod. Furthermore, using Sync (you'll see it when you work with iTunes) is the best method for adding or removing music to the iPod. There is an alternative method know as Manual Managing, but Sync is by far the better way to manage an iPod Classic.
If you need any further help, either with iTunes, arranging your Library, or with the iPod itself, post back into this thread rather than creating a new one, as it will make it easier to see where you have got to so far.

Ipod classic 160 gb says something on it but nothing on it and when i connect to computer itunes freezes

So i have an ipod classic 160 gb i have it already 2 years.
When i look at my ipod it says there is 7 gb free but there is nothing on it!
I have already restore it but when i have to choose my language it blocks.
Also when i format it true windows, it doesn't help.
When i connect my ipod to my computer my itunes can't find my ipod and my itunes freezes even windows can not find my ipod, only when i hold my middle button and menu button then i can format it. but it says synchronizing on the screen but i don't see annything on itunes happening.
hopefully you can help me!u

Thanks Yes, I just found it ( at http://osxdaily.com/2010/11/24/fix-for-no-content-on-iphone-ipod-after-ios-4-2-1 -update/ ) right before I saw your suggestion to look for that fix. But thanks. And yes, it did work. Weird bug, but simple fix, thanks be.
--B-bob

My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

My iPod Classic 160 is in disc mode. I responds to nothing. iTunes doesn't recognize it. It doesn't sync. I've tried to restore and got error 1429. Now it just stays in disc mode and won't turn off. I'm keeping it connected to the charger so it doesn't go dead. Is there anything I can do to resurrect my pod?

To get out of disk mode do a iPod Hard Reset.
Toggle the Hold switch till you dont see the red mark.
Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
Select your preferred language.
See this Apple support Article on the 5Rs.
http://www.apple.com/support/ipod/five_rs/classic/
If you try to restore and get a1429 error message, read this Apple Support Article
http://support.apple.com/kb/TS1372
Good Luck!

My Ipod Classic 160 GB will charge but is not recognized on my macbook or in itunes. Just began suddenly

I purchased my Ipod Classic 160 GB about a year ago new and never had any issues until lately. I recently updated my itunes to the newest version and my Ipod seemed fine and didn't have any trouble. About a week later my Ipod was no longer recognized by Itunes or my Mac book. The catch is, that my Ipod is still able to charge but never shows any signs of connection besides the charging screen. I have no clue where to begin.
Any help would be awesome! Thanks

Have you updated your iPod and iTunes sofware?
most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
most likely it is an incompatible song format, read this Apple support article.
http://support.apple.com/kb/HT1334?viewlocale=en_USet
If your iPod software is version 1.1.2, then you have to use lower quality format.
Can you select the problematic song, and Advance -> create iPod version

IPod classic displays 'No music' after sync, HDD problem? Geschiedenis • Verwijder So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn't find any files on the iPod anymore. H

So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!

Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists?

IPod classic 160 last effort before returning it...

Similar Messages

Maybe you are looking for