IPod classic 160GB 6th gen not sync after HDD & ribbon cable replacement

I recently replaced my iPod 6th gen HDD and ribbon cable, but when I connect it to my PC and iTunes recognizes it, I can't sync or load music to it 'cause it displays an 1439 error, What can I do?

I assume you have tried everything in this article? And I do mean everything.
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
Have you tried restoring it another available Mac or PC to see if the problem persists there?
B-rock

Similar Messages

  • Cover flow on ipod classic 160gb 6th gen

    I was just given an ipod classic 160gb 6th gen, it the previous owners music on it, so I hooked it up to itunes & restored it & updated it to factory settings & put my name on it. I noticed in cover flow mode, that albums are doubled, one for the entire album, then the album cover again for individual songs. when I go to album view, the albums show up ok, there are no double ups there. I also notice when I scroll down to the now playing with the split screen, it comes up blank with no cover art. I had an 80gb 5th gen ipod & everything seemed ok. I wiped it clean with a restore as well to start fresh. It took about an hour & a half to sync over my music library from my external hard drive to my new 160 gb 6th gen ipod. It seems to play ok, so far, I just got it today, & I have been playing it on & off to try it out.
    I am running itunes 9.0.1.8. Also when I plug in my ipod, itunes ops up with an update message for me to update, I click ok for the update, but nothing seems to happen, so I do not know if itunes has updated or not.
    Message was edited by: Sossity

    Sossity wrote:
    Ok, should I try the trialing X, for those persistent multi covers that do not respond to adjusting the track names as first suggested? I went to your tips page & saw the graphic for that. Is it ok to just leave the Xs in or must they be removed?
    iTunes tries to be "smart" and only updates the tag if it thinks you've changed something. Adding the X is a temporary measure to force iTunes to acknowlege that something has changed and thereby hopefully merge the album. Once it's done you can get rid of the unecessary trailing Xs.
    I also looked at your image for handling multi discs, will this group multi discs together in cover flow?
    Yes, that's the point.
    & when one is playing a multi disc set, will the ipod just go straight to the next disc (disc 2) in playback as though it were one single album?
    Yes.
    or will playback stop at the last track of disc 1 & then one would have to select disc 2 to play.
    No.
    Will the multi disc set still come up as 2 different discs to selct to play? I may not want to start with disc 1.
    No. You can always chose which track to start playing.
    One of the albums I was having trouble with multi covers was part of a 2 disc set, disc 1 was credited to the main artist, but had guest artists for 1/2 the tracks, disc 2 was by the same artist with no guest artists. I have now gotten disc 1 to show as a single cover in cover flow by checking off part of a compilation in the info panel, but it does not appear next to disc 2 in cover flow.
    Again setting *Part of a compilation" is the wrong approach. Set *Part of a compilation* to No, put your guest artist info. into the track titles (or any other scheme you choose) and make sure that the Artist value is consistent for all tracks.
    on an off note, I notice when I press my ipod button or navigate any of its features, there is a slight grinding noise, I can hear the hard drive, when I bring it close to my ear, it sounds like a chewing mouse is this ok/normal to hear slight noises? it seems to be functioning alright. It is pretty responsive.
    Yes, the noise from disc activity is normal. My iPod lives in a silcone sleeve which probably muffles it a bit and most of the time I'll have already have music playing so I'm rarely conscious of the noise of hard drive activity but it is there.
    tt2

  • My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter

    My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter. I have like 1975 songs and some videos, but also somtimes the PC does not recognize it, sometimes it does, either ways I can't get my music in the ipod.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My IPOD Classic 160GB is now not recognized by iTunes and will not sync

    I have a 160GB IPOD Classic that now will not sync with iTunes. Both the iPod and iTunes have up to date software versions and I am connecting thru a MAcBook Pro running OS X 10.10.2. I have synced this iPod i the past with no problems and now it does not appear in the iTunes source list.
    I have tried the rest options that the Troubleshooting guide suggested and now at a loss for the next step.

    This is a problem caused by 10.10.2, only way to fix it at the moment is to revert to 10.10.1.
    Quite a few threads on it on other sites and only that one solution. Make sure you raise a feedback to apple though.

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • HT1351 I have just purchased an ipod classic 160GB and decided to sync my itunes music and videos that I purchased via itunes.  All the music sunk but it didnt sync my videos.  It said that they were in the wrong format.  What to do??

    I have just purchased an ipod classic 160GB and decided to sync my itunes music and videos that I purchased via itunes.  All the music sunk but it didnt sync my videos.  It said that they were in the wrong format.  What to do??   I would have thought if I bought the films from itunes it would be compatible with an ipod classic??  How do you change the video format?

    My mistake, it was nothing to do with format.  It woldn't sync because my movies were HD.  HD movies won't sync to an iopd classic 160 GB but when you purchase a HD movie, itunes gives you a SD vervsion of the movie which is compatible with the ipod.  Just needed to go to store, click movies, click purchased and untick the HD box and there you have the SD versions.  Download the SD versions and then sync your ipod and bobs you uncle, movies are on the ipod

  • My ipod classic 80 gb will not sync contacts form Outlook in windows 7.  I have tried many suggestions but none work.

    My ipod classic 80 gb will not sync with contacts in outlook in windows 7. It never has synced all contacts but for a while it would sync "All Contacts" if I created a distribution group in Contacts for that purpose.  Now it will not even do that. What can i do ?

    Hi there,
    I would recommend reviewing the process for setting up syncing in iTunes 11. Take a look at the article below for more information.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    If the issues persist then you may want to take a look at the trouleshooting steps found at the website below.
    iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    -Griff W.

  • IPod Classic 160Gb 6th Generation Won't Sync With Windows 7 Laptop

    Yesterday I purchased an iPod Classic 160Gb to replace my old iPod Classic that is on it's last legs (10 years old)
    My laptop recognises the iPod as a drive but iTunes does not recognise it at all. When I connect the iPod to iTunes the iPod shows it is syncing but this only lasts about 10 seconds. Needless to say there is no music etc. on the iPod when I disconnect it.
    I have tried all the troubleshooting suggestions but none of them have worked. When I try and connect my old iPod I have the same problem.
    I upgraded to the latest version of iTunes before connecting my new iPod; it seems to me that this is a software problem!
    I have spent over 5 hours on this today and am getting fed up now
    Any ideas please?
    Thanks in advance.

    I'm getting this exact problem too, although mine is not brand new it randomly wiped itself the other week and now nothing I'm doing will get the songs back onto it, this is so frustrating!

  • After I updated my Ipod Classic 160GB, Why wont it Sync with Itunes 11?

    after Updated to Itunes 11, Why wont my Ipod Classic 160GB connect to Itunes 11... Ive tried every routine and step to get it working and it will not Work, Ive tried Resetting it everytime I reset it the only thing it will do is Display the APPLE sign intill the Ipod Dies. Ive Tried Disk Mode and it won't do anything accept say "Ok to Disconnet". It will Not show or connect to Itunes...
    Are there any other Options?

    Do one of the following:
    > Restart your computer
    > Restore your iPod
    > Uninstall & reinstall iTunes
    > Check on my computer (windows XP) OR computer (windows vista & 7) and see if your iPod shows on there (Windows Only)
    I'm not a Mac user so I'm not completely sure if this gonna help.

  • I have my first iPhone (5c) and I have an iPod classic 160GB.  Can I sync poth with iTunes on my PC?

    I have lost some podcasts.  I have a new (my first) iPhone and I want to sync it and my classic iPod with iTunes on my PC.  Can this be done and if not, how can I recover my lost podcasts?  They are no longer available for free as I first got them through subscriptions.
    iPhone 5c
    Windows 7 (fully up to date)
    iPod Classic 160GB
    Second question:  why are podcasts only available for so short a time now on iTunes Store and on sites like NPR?

    I lost maybe a dozen podcasts from multiple podcast collections on iTunes.  They now have little i's on them indicating they cannot be found.  I have only 1 Apple ID.  I use it on iTunes and on my iPhone.  Since I sync'd my iPhone with iTunes for podcasts, a bunch of them have the little i's.  And some seem to be missing from my iPod too, but I can't vouch for them being thre before the sync between iTunes and the iPhone.
    These podcasts were not purchased, they were subscribed to and they were free.  Now that they are missing, it will cost me .99 each to replace them and that isn't going to happen, but I'd like to get them back.

  • Ipod Classic 7th generation will not sync with all movies in Itunes

    I just bought an Ipod classic today, due to my iphone 5 not able to connect to my car entertainment system and car stereo.  Needing a 30 pin to connect to it.  So I bought it, connected it to my mac computer, and not all the movie files will sync to it.  I get this message:
    For some reason, some of my movies will transfer to the ipod classic, and some will not.  They are all m4v files.  Does anyone have a suggestion?

    The files that won't copy probably have too high a data rate. From http://www.apple.com/ipodclassic/specs.html
    Video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    tt2

  • HT1386 I have a ipod classic and it is not syncing when I buy a song in itunes.

    I have a new Ipod classic and when I first plugged it in to my computer, it downloaded all my songs I have had in itunes. But this is the first time I am buying songs off itunes and have bought 2 now, and they will not sync to my ipod. When I eject the ipod, it says syncronizing, but the songs do not show up. I have the download automatically box checked. ANY help greatly appreciated!!!
    Thanks
    Jennifer
    p.s. I know I may be in the wrong area for this, but at the bottom it gives no option of ipod classic, and it is not a touch.

    Is your iTunes account authorized for this computer in iTunes? - to check, open iTunes, and in the top menu bar, select "store", then "authorize this computer". 
    See iTunes Store- About authorization and deauthorization for Macs.
    See How to Authorize or Deauthorize iTunes | PCWorld for Windows.

  • Ipod Nano 6th gen not syncing mp3s after itunes 11.1.4.62 update

    As the title says, after updating itunes to the 11.1.4.62 update, and everything that doing that successfully involved such as completely uninstalling all Apple software and then reinstalling itunes, my ipod nano 6th gen will not allow itunes to sync any mp3 files to it. The only way to get any new files onto it is to let the ipod convert them into AAC files when you transfer, even though all other music files on the ipod are, and have always been, mp3 files. Everything worked fine before the latest itunes update, I could sync mp3 files to the ipod nano with no problems.
    Anyone know of a solution to this issue, or whether Apple are working on a solution for this obviously botched itunes update?
    Thanks in advance.

    Hello MarkLesch,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Verify that your computer meets the minimum system requirements
    Verify that iTunes is installed and updated
    Restart the computer
    Verify that Apple Mobile Device Support is installed
    Verify the device's USB connection
    Verify that the Apple Mobile Device Service and iPod service are both running
    Verify that the Apple Mobile Device Driver is installed
    Remove and reinstall iTunes
    Best of luck,
    Mario

  • I can't open albums recently synced to my iPod Classic 160GB 5th Gen.

    My approximately 2.5 year old ipod Classic Gen. 5  recently developed a problem consisting of the inability to open and play recent albums that had been importged into iTunes and then synced to the iPod. The software version on my iPod is 2.0.4 and it had been updated to this level after I activated the iPod shortly after purchasing it in 2010.  The version of iTunes on my computer is Version 10.5.3.3 which I installed on  01-25-2012. My Dell Computer XPS Gen 5 has Windows XP SP 3 installed on it as of 05-2009.
    The "opening albums" problem has developed since the latest version of iTunes , 10.5.3.3 was installed. My iPod is about 75% full of it's stated capacity of 40, 000 tracks.I have nothing but music on my iPod.
    All of my music iwithin iTunes is fully populated with the respective meta data including appropriate album art.
    I have attempted several workarounds for this problem, including using the iPod reset routine (moving the HOLD button to the lock position for about 5-10 seconds, moving the Hold button back to the open position, then simultaneously holding the Menu and the Select buttons down until the Apple lkogo appears on the LED). The iPod eventually resumes normal mode and comes back to the Main Menu. This does not solve the problem of specific tracks within an album or playlist not playing.
    The second workaround was having the iPod docked rto my computer and to right click the iPod graphc within iTunes which displays the panel which provides iPod identification and capacity statistics, etc. By clicking on the Restore button on this panel a procedure is launched to clear out the existing firmware on the iPod and reset it to that level on the iPod when it came from the factory; my iPod was reset to version.2.0.4. There is eventually a choice to make as to clearing off the existing music and I chose to do so.
    One thing I do notice about the tracks that will not play is that they invariably show in the Get Info Summary tab as ID3tag  v2.4 and Encoded by LAME3.98.
    The bulk of my music reflects ID3Tag v2.3. I read somewhere that ID3Tag type v2.4 has some negative impact on iTunes and subsequently the iPod.. The ID3tag v2.4 offers the opportunity to preload album art within the ID3 tag at a prescribed area of the ID3 tag prior to importing the music tracks into iTunes.
    I also read at one of the User Commumnity sites that iTunes began the iCloud concept in the latest version or versions in January 2012. Within the Menu bar at the top of the screen you can left click on the VIEW item and get a drop down list of options. If you left click on the VIEW OPTIONS you will get a panel which provides you a selection of fields to be displayed on your listing.among them being iCLOUD DOWNLOAD and iCLOUD STATUS. I have not subscribed
    to the new iCloud service so all my tracks show as WAITING with a clear cloud graphic. Aparently these iCLOUD status indicators must be stored somewhere on the ID3 tag. I hope that the music that I have been impoting to iTunes is not being corrupted by the utilization of the same area for 2 different purpsoses.

    Hey you dont need our help, you can help most of us here.
    But can you clarify that the problematic Albums does play in iTunes and not in iPod?
    I agree with you, it is most likely the ID3Tag v2.4, which may not be implemented correctly, missing  iPod software codec,  especially the album art tag.
    I can only suggest, deleting the Album Art for the album and see if it works.
    Have a nice day!

  • IPod Nano 6th gen not syncing despite reset

    My Dad's iPod Nano 6th generation is not syncing with iTunes. He used it first with iTunes on a MacMini G4 and – with later versions of iTunes – ran into trouble while syncing. Now he owns a Mac Mini mid 2010 with a brand new installation of Mavericks on an erased and reformatted harddrive.
    Software's all up-to-date but the iPod still does not sync. It's being recognized and being found spotless by the harddrive tool. iTunes will just show it in the sidebar with no further info on the content of the iPod being displayed except the colored bar at the bottom indicating 430+ songs on the thing. No copying manually is working.
    Switching syncing options to manual and back do not help either, nor does a restart (of either iTunes or the Mac).
    I have reset the iPod but the result in iTunes is now that there is a welcome screen with button «more». As soon as I click that the iPod disappears from the sidebar – with no further action or option.
    I'd be glad to get any help here!

    Figured out the solution: I quit iTunes, dragged the "com.apple.iTunes.plist" file (located in Library –> Preferences) to the desktop and reopened iTunes. After confirming the t&c pop-up I plugged in the iPod and it's window appeared again in full, letting me sync contents once again.

Maybe you are looking for

  • How do I clear the blank space between content and footer?

    In the process of revising a Muse website, I deleted some content from one of the pages and revised the content that remained on the page. Now I have a blank area between the bottom of the revised content and the top of the footer, and I can't seem t

  • Can't access my iTunes on my external hard drive

    I have been putting my music (both downloaded from iTunes and burned from my CDs) onto an external hard drive and until this week, it's worked out well. Recently, I had a friend take off Windows Vista (it came with my laptop) and install Windows XP.

  • NB200 Setenv.ini not found; cannot boot

    Hi all My NB200, second-hand and upgraded to Windows 7 had recently became very buggy therefore I decided that a fresh reinstall would be a good option. It soon turned out not to be, as, after pressing 0 and entering the recovery process, an error 'S

  • OAS is slow when accessing on same machine

    I have OAS 4.0.8.1 installed on an NT machine (4.0 sp6) on our network. When it serves pages to a browser on the same machine the response time is very slow (5-6 seconds). The pages that I'm accessing are fine. When using a browser on another machine

  • I am unable to select any 3D options in PhotoShop cc. Can anyone tell me why?

    I am unable to select any 3D options in PhotoShop CC. Can anyone tell me why?