Ipod classic 160gb will only turn on when plugged in

i recently got a ipod classic from a friend of mine who has no use for it and i knew there was something wrong with it but its confusing. the ipod will turn on if plugged in but will go to chatging please wait screen and never charge. if you put ipod in disk mode you can restore it but it will just go back to "charging please wait" after its done. i have no way of getting a new battery nor do i think i need to. i have tried all the the options there are , oh and i also have yet to see an apple logo and it turns off if i unplug it.

Sounds like a dead battery.  You can have Apple replace it for a flat fee plus shipping and handling, or you can send it into a third party service center who can do the same job for a little less.
Google for third party repair centers.
B-rock

Similar Messages

  • My iPhone will not charge and will only turn on when plugged into adapter.

    I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

    http://support.apple.com/kb/TS2802

  • My ipod nano 6th gen will only turn on when plugged into a power source.

    My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions? 

    Howdy mela1223,
    If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer. 
    Restoring iPod to factory settings - Apple Support
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage. 
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I replaced battery and now will only turn on when plugged into a charger..

    I replaced my batter on my iphone 3gs and then it will only turn on when i connect it to a power source.
    After it has turned on you can take it off charge and it will stay on...
    Help please!! thanks

    Either you got a bad battery, didn't install it correctly, did some other damage while installing, or haven't let it charge enough yet. There's really nothing we can do to help you with any of those scenarios.
    Regards.

  • Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!

  • My ipod classic 160gb will be playing fine then it sometimes freezes up or start shuffling through the songs not playing at all. After i reset it works ok for a while then same thing. Bought this so i could control through my steering wheel/radio.

    I sure hope someone can help me with these ipod classic 160gb issues.
    My ipod classic 160gb will be playing fine and then freeze up (unable to move around in it at all) and i have to reset it. This happens constantly whether in my car or when i listen at work. After i reset it works ok for a while then eventually requires another reset.
    Another problem is that it will be playing fine and then start shuffling through songs without playing them. The songs that get shuffled work fine in the itunes program but not on the device. A reset does not correct the problem with these particular songs.
    Also, sometimes when it is working and not freezing up or shuffling through, it will appear that a song is playing (in fact it says "now playing"), the song titlte is scrolling, but the song progression bar does not move. The count up in front of the bar stays at 0:00, and the count down at the end of the bar stays at the song length minutes not counting down. After I reset, it works fine and all the songs will play.
    The reason I got this thing was because i can control it through my steering wheel/radio while i'm driving. I previously had a Zune 80gb which i'm glad I held on to. I have over 6600 songs (so I'm obviously a serious music listener and obviously frustrated), but only about 10 songs were downloaded through itunes, the rest I either ripped or downloaded from other site. From what i've been reading it sounds like there's a lot of ipod owners out there experiencing similar problems. Does anyone have any suggestions to resolve these issues for me and everyone else? I got my first iphone 8 months ago, then the ipod and was considering an ipad. But in light of my ipod issues.....
    I hope someone can help me and convince me it wasn't a mistake to go Apple! Thanks!!

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.

  • Only turns on when plugged in

    i pod touch only turns on when plugged in and when you go turn it off the volume goes to the limit then you get to swipe for power off

    I have the same problem. And my battery is %61 healthy. Today it started to shut down automatically when I unplug the powercord. I don't know what to do. I tried everything like PRAM, PMU etc. But no change. The battery is now fully charged. But whenever it is unplugged from the powercord it shuts down. Please help!

  • My iPod Touch 4G will only play music when attached to headphones

    When I attach my headphones to my ipod touch 4G, it will play music normally, but when I remove, it will not play through the speakers, nor am I able to control the volume as the volume bar will disappear and the external buttons will not work.
    Please help me, thank you.

    You can try the standard fixes to rule out a software problem:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPOd.
    If still problems you have a defective headphone jack that requires replacment,. Here is one third-party place. Google for other:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Apple will only exchange ti for thisi price:
    Apple - Support - iPod - Repair pricing

  • How do I restore my iPod Touch that only turns on when plugged into the wall?

    I found my old iPod Touch 4th generation in my backpack, and my backpack went through the wash, (It shouldn't of been too bad since it was in the side pocket) but it goes dead instantly as soon as I take it out of the wall charger, and it does not turn on when I plug it into my computer. It also has a pass, (That I forget) so I need to restore it. Is it possible to restore it without connecting it to a computer?

    No. You have to connect the iPod to a computer with iTunes to restore the iPod.
    Did you throughly dry the iPod before you started try to use it?
    If not try by
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html

  • TS1363 iPod Classic 160gb will not connect to Macbook.

    My iPod classic will not connect to my macbook. It is recognized by my wall charger, speakers, and FM transmitter in my car. I've had this trouble for some time, but before I attributed to my previous Macbook which had a few other problems. However I just got a new macbook, and it is still not coming up in Finder nor iTunes. Any advice is much appreciated!

    What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac?  Have you tried another USB cable just in case?
    What happens if you try to reset the device with it still connected to the Mac?
    How to reset iPod
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • Only turns on when plugged in, but battery is fine.

    My iPod nano won't come on when I press the center button, and it won't reset. It will sometimes come on when I plug it into my computer, and when it does, it works great until I either turn it off or leave it until it turns off. As long as I keep it on I can unplug it from the computer and listen to it. Today I got the computer to actually recognize it for the first time in about four months. So I hit the restore button and then re-synced my music. I disconnected it and listened to it for about two hours. Eventually I had to turn it off, and once again it won't come back on.

    If you can use the touch screen, upload them to a service like Dropbox or OneDrive.
    ~Lyssa

  • IPhone only turns on when plugged into wall

    Hello, I have an iPhone 4 CDMA and it only works when in is plugged into the wall.  It does not work properly anyother time.  When I plug it into the computer it goes through the Boot Loop.  When I put it into DFU mode and recovery mode and try to restore it in iTunes it doesn't restore and just gives me a bunch of different error codes.  The most common error codes are 2001, 2006, or 1604.  It use to give me Error 21 but I fixed that by editing the hosts files.  I have tried six different computers and seven different iPhone cables on the computers and I still get the same error codes every time.  It does not work if it is not plugged in.  I have replaced the dock connector/charging port and the battery.  I bought it used and think it may have been jailbroken at on time.  It has not been jailbroken in the time I have had it.  I have also tried Tinyumbrella and that did not work.  What could be wrong with it? 

    Hello! When it turns off, do you notice if it drains quickly or does it just shut off even with full battery? Because this can also be caused by battery problems. Your iPhone may not be turning on even when plugged into a computer because a wall outlet charger gives off more power than a computer does.
    I suggest you bring your phone to an Apple store right away. They could at least help you determine the problem, and by then, you can decide what to do with your iPhone - you can have it repaired (if they say it's still fixable), you can have it replaced with a refurbished iPhone, or you can buy a new phone completely.

  • IPhone 5 will not turn on, when plugged in apple logo flashes continuously

    My iPhone 5 mysteriously turned off with about 30% left, it will not turn on at all no matter how long I hold the buttons. Also when plugged in the apple logo turns on but than turns off after acouple seconds, it will repeatedly do this until unplugged.

    Hello rthand,
    Welcome to Apple Support Communities.
    The following article provides troubleshooting steps for the symptoms you are describing.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Regards,
    Jeff D.

  • I have a 6th gen ipod classic that will not turn on...

    So,
    As the title says that is what I have, however, here are more specifics and what I have done so far...
    The ipod will not power on. When I try to turn it on, the logo appears, then it seems to power cycle. Now, onto what I have tried thus far...
    I have tried the reset using the menu/center button combos several times and it just does the same thing. I have also tried to plug it into my windows 7 pc, and utilizing Itunes "restore" it. I will quickly back up and state that when I plug it in, Itunes will recognize that it is an Ipod, and display a msg saying that an ipod is plugged in that may be corrupted, please restore it. After I click the "restore" button, itunes will start to extract the s/w to restore it, then an error msg pops up and says "unknown error - 1415" - "unknown error - 1439". Now, I will say that when I plug it in and try to restore it, the first time around it gives me the 1439 code. Subsequently, it will give me the 1415 error if I try to repeat the process. I will unplug it and try again, and the same exact pattern occurs, 1439 on first attempt after plugging into itunes, and then 1415 subsequently. I have read several other forums to no avail possible solutions.
    At this point, Im feeling like the only option left is to pay a visit to my local apple store. BUT, before I do that I wanted to see if any experts might have a solution for me here! PLEASE HELP! Im using my shuffle right now, but I really want to get this classic running again! I do have screenshots of all my errors and what itunes shows me in case anyone might want that stuff. In any case, I digress...

    Thank you Bilbo! I was trying to find the instructions on how to do this, but was unable to locate them until you pointed me to it!
    After running the diag, it shows me error...
    [Device Opened]
    Error
    Menu to continue
    From the information Ive read on this occurance, my HD is shot? Is this true or likely? What would be recommended as the next step?

Maybe you are looking for

  • Aggregation tab disabled for fx logical columns

    Hello, I am new to OBIEE. Can somebody please help me understand the folowing - Query - While defining formula column in BMM whenver we use logical column as source why Aggregation Rule tab gets disable? How can i apply aggregation rule for such colu

  • Problems crawling websites - website does not show in root

    Hi guys I have problems accessing a couple of websites, and they all seem to have the same problem, so I would really appreciate your help. I have set up the web repositories according to "How to set up a Web Repository and Crawling it for Indexing",

  • Add two animations to the same movieclip

    Hi there, I was wondering if anyone could tell me how to fade my movie clip out after using tweener, or if it can even be done? If anyone has any suggestions how to find the answer to this question it would be greatly appreciated. In addition, if any

  • In Tools, I have a resume update message but it wont update.

    I am having problems with YouTube and was checking my computer settings. I have found in my Firefox Tools menu a message that reads "Paused Update". I do not remember pausing an update so when I click on it to resume it does not do anything. It appea

  • Where are the niScope function definition​s (e.g. niScope_Au​toSetup())​?

    I am just learning niScope, and I am having trouble locating simple function definitions (e.g. niScope_AutoSetup()). I don't mean just the .h header files, I need something that tells me what these functions actually do. Anyone know a good ref for th