IPod Classic 4th, desktop icon red circle with 'x'.

I've got an iPod Classic 4th, 20GB, which I use with my iMac G5. It works fine, I can add/remove music, and it syncs fine. However, whenever it's plugged in, and appears on my desktop, the desktop icon for the iPod shows a red circle with an 'x' on the screen, the same one you get on your actual iPod when it gives you the message: "Do not disconnect". It's not much of a problem, except the device didn't show in boot preferences either when I attempted to use it as an external HD in order to install panther on a partition. Any ideas what this symbol on the desktop icon could be?
Thanks.

All you can do is try restoring the device. If you are unable to you'll most likely have to get the iPod repaired.
Check out this article
http://support.apple.com/kb/TS1463?viewlocale=en_US

Similar Messages

  • My ipod classic 160 has a red circle with a X in the middle how do I get it to work?

    My ipod classic stopped working.  It has a red circle with a X in the middle. I've troubleshooted but still can not get it to work.

    Hi Mildred,
    Happy Holidays!
    The resource below will explain the steps you can take to resolve the issue you are having with your iPod classic.
    iPod Displays a Red "X" Icon - Apple Support
    http://support.apple.com/en-us/HT203170
    The first step is to download the latest version of iTunes on your Mac or PC.  Then try the steps below.  
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    Setup Service for iPod
    If you cannot force your iPod into disk mode and restore it, then your iPod may need service. Click one of the links below to setup an iPod Service Request online or make a reservation at the Genius Bar before visiting your local Apple Retail Store.
    Apple Retail Store
    iPod Service Request Online
    Putting iPod into Disk Mode - Apple Support
    http://support.apple.com/en-us/HT201544
    iPod devices with a Click Wheel
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
     Older iPod models without a Click Wheel
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
    When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
    Restoring iPod to factory settings - Apple Support
    http://support.apple.com/en-us/HT201540
    It's important to understand the difference between updating and restoring. Updating simply installs the software that controls iPod and does not affect the songs and files stored on iPod's disk. Restoring erases the iPod's disk and restores iPod to its original factory condition.
    Warning: Because restoring erases all the songs and files on iPod, back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. 
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage. 
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    I hope this information helps ...
    - Judy 

  • HT1320 ipod classic now displays a  red circle with a X inside. I cannot reset it. It instructs me to go to the support psge. Is there a fix for this?

    I cannot reset my Ipod there is a circle with an X inside. Is there a fix for this?

    Hello astro30,
    Try putting the iPod into disk mode manually, then attempt a restore via iTunes.
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/TS1463
    Cheers,
    Allen

  • Ipod classic has a big red o with a x in the center , says at the botton of the screen apple support ? how do i fix this

    ipod classic has a big red o with a x in the center , says at the botton of the screen apple support ? how do i fix this?

    Hi valdez425,
    I understand that your iPod classic is displaying a red “X” icon on the display. I would recommend restoring your iPod classic from Disk Mode. There are steps to following in this article to assist you.
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/ts1463
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    If you restore your iPod and the issue continues, you may need to set up service by following the links at the bottom of the article.
    Thanks for reaching out,
    -Joe

  • Unknown Icon: Red Circle with Feather Inside

    I have an Icon that appears on the top of my Curve 8530 and I have no idea what it is for.  It is a red circle with a white feather inside of it and it shows up with either the number 1 or 2 next to it and then goes away after a bit.  It continues to come and go at various times.  Does anyone know what this is for?

    Hi and welcome to the forums jwj71!
    A couple of places for you to visit: Blackberry 101     Tips & Tricks
    Glad to see you solved your issue.  Now be sure to mark your thread as solved so other users may find the answer if they need to. 
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • HT1320 Red Circle with X Inside

    Tried to reboot  I Prod Classic.  Got a red circle with an x in and a message to go to the support page at apple.com.  Any advice please?

    Sorry, we cant help you here, the Red X is Fatal, you need to replace the Hardisk at the Apple Store if it is under warranty, or google for 3rd Party iPod Repair centre, near your area.

  • Red circle with X through it after plugging ipod classic into computer?

    My ipod classic is roughly 5 or 6 years old. It has worked great besides a few problems here and there. Today I plugged it into my computer and updated it on itunes. It had been a long time since I had done this. But generally the ipod works great! Shortly after unplugging the ipod (by ejecting it) a red cross with an "X" through it came on the screen after the music froze. PLEASE help!!! I use this everyday and it has tons of irreplaceable music on it!!! Thanks!

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • IPod Classic 160gb Red circle with Red X

    My 160 has always been a little "off". Recently, I got a red circle with a red circle in it icon. Is this really the "kiss of death" I've been reading about. This is a double-whammy for me because my iTunes library dumped out on me and I was only able to salvage about 7800 of 13000 songs. Is it over?

    teh apple suport guys will say it's a hard drive failure, which is correct, but the same thing happened to me and i saw this site. it seems crazy, but take the advice here
    http://www.topix.com/forum/gadgets/ipod/TJB41HJ0RV3TNQE9D
    smack the side of the ipod while holding it hard. do it over fast and over untill you hear a weird sound coming out of it, then it should come back to life. worked for me, saved me 250 bucks, but later my clasic broke down because of the sync failures going on with the classic (if you dont know what i'm talking about, look around the apple discussion site classic page or go here http://discussions.apple.com/thread.jspa?threadID=2151907&tstart=15)

  • My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

    my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

    Try to restore the iPod. Here's an article that provides troubleshooting for it.
    http://support.apple.com/kb/TS1463
    If that doesn't work visit an Apple Store and see if they can replace it.

  • HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

    My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
    After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
    Many Thanks

    The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
    tt2

  • HT1363 My ipod click wheel will not go into disk mode.  All I get is the red circle with the X in it

    The only thing my ipod will do is display the red circle with the X in it.  I can not put it in disk mode, it won't work.  It's the 160 GB classic with the click wheel.  Is there anything else I can do to make it work again?

    If you are unable to get the iPod into Disk Mode, the Hard Drive is likely damaged and beyond repair. You'll probably want to have it replaced either by Apple or a third party service center.
    Here are Apple's repair prices.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • IOS 6.1.3 installed on iPad but no red circle with 1 on the Settings icon

    Hi,
    Looking at an iPad to buy on ebay and specifically want to get one with version 6.1.3 still installed. I emailed seller, they sent pic of the About screen in Settings which shows it's on this version (also, it's an iPad 4th Gen, 128GB, if that helps), but in pics of the item, displaying the icons, on the Settings icon there is NO red circle with the 1 in it. Why would this be? I've never seen this before (everyone I know still on this version, on either iPhone or iPad, has this little red circle with the 1 in it, obviously indicating the update, which none of us diehards wanna do, til we absolutely have to of course). Does this mean that this iPad is NOT upgradeable, ever? Would love some help on this, don't want to purchase this iPad until I know why that red circle ISN'T there.
    Thanks!

    Hello mom_5_01,
    The following article should be quite beneficial in your endeavor to update your iPad.
    iPad: Unable to update or restore
    http://support.apple.com/kb/HT4097
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
    If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
    Cheers,
    Allen

  • My iPod displays a red circle with an X in it.

    My ipod dispays a red circle with a red X in the middle?

    Hi there vinceperez,
    You may find the troubleshooting steps in the article below helpful.
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/ts1463
    -Griff W. 

  • Red Circle with X icon?

    My classic ipod 160GB turns on but then a red circle with an X in the middle appears.  I have tried connecting it to itunes but it doesn't connect.  I also tried to reset it and same thing happens.  Help!!!

    See this article.
    http://support.apple.com/kb/ts1463
    B-rock

  • 80gb iPod has red circle with and x

    My ipod (80gb) has a Red Circle with an X in the center...How Can I repair it?

    Hello Rudyg111,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/ts1463
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    Have a nice day,
    Mario

Maybe you are looking for

  • InDesign CS3 - Default Black color issue

    Default Black color converted as Spot color in Indesign CS3. I'm using default color "Black" in InDesign CS3. While creating PS from InDesign CS3 and convert it as PDF using Distiller 7 & 8, it would have changed as "Spot Color Black" instead of colo

  • Option button in screen painter

    Hi everyone, Can I group option buttons in screen painter? How? I have two problems: 1. The options buttons seem disabled: when i click on them, they aren't checked 2. I can't group them Thanks Carles

  • Connectivity issues to 3 1240AG APs

    Hi, I have installed 3 1240Ag Access points in a warehouse but I have issues when connecting to any - they keep dropping connection- I have left them set to default except changing ips, adding SSIDs, no security settings. Any help would be appreciate

  • CC desktop failed to install

    I have Windows 7, and everything else the recommendations say I should have. I've tried downloading the desktop app itself, and then InDesign twice, and every time I get the same message - CC desktop failed to install. The only option available to me

  • What trigger is fired just before hitting Ctl + F11.

    Hello Friends, I am developing a Master details form in 61. What trigger is fired just before hitting Ctl + F11 Thanks, Sri