IPod classic 5th is not recognized by operating systems or iTunes

I have an iPod Classic 5th generation A1136 (80g with video).  Recently, right around the time of the new iTunes release, my iPod is no longer recognized by my Mac (in disk mode) or in iTunes (in any mode).  It still charges when connected to my computer.  It plays music (and video) in all of my docking stations.  It isn't recognized by the machine.  I have tried iTunes on other machines.  I have tried the 5 R's.  I have put it in disk mode.  I have reset the iPod.  I have reinstalled iTunes on my Mac.  Every solution i have read about, I have pretty much tried.  Could this be a hardware issue?  If so, what sort of issue would produce these symptoms.

You have a 4th gen Ipod.  First reset the ipod , then put it in disk mode. then plug it back into computer. That second icon of the folder  means it can't find an OS.  You might have to take it apart to see if you have the hard drive seated correctly and the hard drive ribbon. If none of this works, uplug and restart it, hold you ear to it and listen to see if you hear a clicking or buzzing sound. If you do the hard drive is bad. To do a reset -toggle the hold switch on the end by the screen then press and hold the center button and the menue button at the same time-then as soon as the apple comes up - press and hold the center button and the botton of the click wheel, disk mode should come up.  Plug back in and see if it comes up in itunes do a restore. The bottom of the click wheel is play- pause. It's also what you hold to shut it down.

Similar Messages

  • Ipod Classic 160 GB not Recognized by Itunes

    Itunes does not recognize my Classic Ipod 160 GB. I have tried all the suggestions offered by apple. Any advice?

    I had the same problem with my iPod classic 80 GB. I spent an hour on the phone with Apple support this morning. It is interesting that I could still sync my iPhone and an older iPod, just not the Classic - so I suspected either a hardware or Mac software issue. The solution (I think) is that the permission in OS X for the device is not recognized. After restoring my iPod to factory settings, and completely deleting and reloading a new copy of iTunes, I am now able to get my Mac to recognize this iPod. Following the instructions found here:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8342.html
    I was able to add permission for the "administrator" to have read and write privileges on this device. That seems to have solved the problem. Thanks to Ryan at Apple Expert for the troubleshooting. Good luck!

  • Ipod nano 5th gen not recognized by itunes

    Having same issue as other post except that I'm on XP home instead of a Mac. Windows recognizes the Ipod but Itunes does not. I've tried a number of the tips I've read about in the support section, but no luck. 2nd Gen Nano and Shuffle work fine and are recognized by Itunes. I was able to charge the 5th gen Nano but it was never setup since it was not recognized.

    Sorry about posting in Ipod discussion instead of Nano 5th gen discussion. I was probably half awake.
    I spent a lot time messing around with my computer with no luck. Finally contacted an Apple expert and though the rep was not able to solve the issue with me, he pointed me in the right direction. My fix was actually quite simple:
    I downloaded Itunes onto my wife's laptop and plugged in the Nano. The setup worked and Itunes recognized it. I was able to update the latest software for the device. I moved some music files over with the Homeshare feature just in case I would not be able to use my PC. Luckily when I plugged the Nano back into my PC, Itunes recognized it.
    It was either the initial device setup or the update that I needed to resolve the issue on my PC. So try it on another computer if you similar issues before you waste a lot of time and effort.

  • Ipod nano 5th generation not recognized by itunes...help!

    I have a 5th generation ipod nano, music suddenly vanished, not sure why. Tried to download music from itunes, but the device is not comming up on itunes. Any ideas?

    help, i got a new ipod 5th generation and itunes is not recognizing the ipod. I've tried everything, I even restored it on my dads computer. I lost all my files and I'm extremly frustrated. I'm not pluging it into the wrong port b/c I have a PC so its clear what port I'm putting it into, the ipod is chargining, and the video's are coming up, but the ipod is not syncing, I don't know what to do.
    please email me at: [email protected]

  • Ipod classic 160 usb not recognized

    Ipod Classic 160 (not recognized by computer) and under Ipod Diagonistics (no Ipod found). I have two other Ipods which I-Tunes and my computer recognizes.  I have reset Ipod to no avail. Because I am unable to connect to I-Tunes with the Ipod I am unable to restore or reset.  I have watched all the YouTube videos and followed each.  One thing that is strange is it will not test or disconnect from disk mode.  I really enjoyed this I pod and hope one of you can resolve this problem for me.  Thanks

    Howdy spacecraft24,
    Welcome to Apple Support Communities.
    From what I gather, your iPod classic isn’t recognized by iTunes on your PC. Take a look at the article linked below and try running through the troubleshooting suggestions that it provides.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Take care,
    -Jason

  • Ipod nano 5th generation not recognized by itunes

    I just got a new iPod nano and when I connect it, nothing happens. Itdoes not appear in the device list in iTunes. The nano screen says it is connected but I didn't get to even set it up in itunes. I've tried everything on the apple site - uninstalled itunes and then reinstalled, reset the ipod. I just can't restore because the apple site says I need to do that through iTunes, but I can't b/c it's not showing up in the device list. VERY FRUSTRATING!!

    help, i got a new ipod 5th generation and itunes is not recognizing the ipod. I've tried everything, I even restored it on my dads computer. I lost all my files and I'm extremly frustrated. I'm not pluging it into the wrong port b/c I have a PC so its clear what port I'm putting it into, the ipod is chargining, and the video's are coming up, but the ipod is not syncing, I don't know what to do.
    please email me at: [email protected]

  • IPod Classic 120GB is not recognized by computer even after hard reset

    I have an iPod Classic and it recently would act like it was playing music but was not in reality. I ended up having to hard reset the iPod. Now that it has been reset it will not sync with my computer. I hook it up and the screen reads +do not disconnect+ my iTunes will not recognize that there is an iPod connected and when I open My Computer it often freezes or tells me that I need to reformat the iPod for it to be recoginzed by Windows. I do not have the option to format it to FAT 32 though. What do I do??

    This is my iPOD
    iPod (touch wheel)
    All iPod (touch wheel) models have a FireWire port cover. Scroll wheel models don't, and dock connector models don't have a FireWire port. The iPod (touch wheel) model controls look similar to the iPod (scroll wheel) but the touch wheel itself does not turn. iPod (touch wheel) models are considered second generation iPod models. The top of an iPod (touch wheel) model is shown here:
    I went into the link and looked at the 5 R's. Nothing there. I couldn't restore the iPod if I wanted considering I would need to connect my iPod to the Computer which I cannot do.
    Putting iPod into Disk Mode - did not work - I tried the click wheel instructions, but it did nothing at all....it was totally unresponsive. then I went and did the *If you have an older iPod model without a Click Wheel* instructions get to the fourth step where it says
    *When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.*
    but the Disk Mode screen does not appear. It goes straight to ""ok to disconnect"
    Is there something else going on or something trivial that I could be doing that could be messing up these instructions?

  • Ipod classic latest version not recognized in itunes also downloaded 400 plus songs, can play them in itunes but can not download on to ipod any idears /

    latest 6th gen 160 gb ipod not recognized in itunes, have done all the checks, has been confirmed in itunes sync, Also down loaded 470 new songs into itunes,Can play them,but can not down load back into my ipod, any thoughts? Question,

    See my answer under "iPod 160GB not recognized". The steps I took to fix this problem include completely uninstalling and then re-installing iTunes 9.0.2, restoring my iPod to factory settings while in disk mode, following the Apple instructions of repairing the permissions (outlined in my other post), and even after all that my iPod "crashes" after syncing more than 300 or so songs. I hope that Apple will come out with a real fix for this problem soon. Best of luck.

  • Ipod classic 2nd generation not recognized on itunes

    So i still have an old ipod 2nd gen for windows. though i have a firewire and the mini port on my computer running windows 7, it does not recognize my ipod classic 2nd gen. i am trying to put stuff on it but nothing. any ideas if i need an old version of itunes or what i can do??

    Hello 44elite444,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot your iPod issues. There are links there for additional steps if you have a Mac OS X or Windows computer.
    iPod not appearing in iTunes
    Regards,
    Jeff D. 

  • Why does my Ipod touch 5th gen not sync podcasts with my Windows Itunes? Both are up to date with versions.

    I didn't see this asked so sorry if this is a duplicate question.
    In Itunes (it is the most recent version for windows available as of 2/12/2014) all my podcasts are showing they have downlaoded to my PC. They don't have the little cloud next to them. I sync my Ipod touch 5th gen. The sync shows everything was synced. I look at the "Whats on this ipod" tab and they are listed. But when I disconnect the ipod via the "eject" icon on the Ipod button in itunes and look at the podcasts they still show as not downloaded (greyed out and if wifi is turned on the little cloud is next to them ).
    So whats going on? I had this issue with my ipod touch 4th gen as well and though it was because the podcast app stopped upgrading but the itunes on windwos did. But the syncing of the podcasts are even worse with the 5th gen then they were with the 4th gen.
    I typically don't have wifi turned on since I want to sync the ipod via itunes. So I have a central place to keep the old podcasts without having to take space on the ipod itself. I saw some references to the downloading of podacasts are done only via wifi, but that just didn't make sense. Why be able to sync Itunes if they are just going to turn around and make you do the same on the device?
    Any ideas? Suggestions?
    Thanks for the help in advance.

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Also I requested that your email address be deleted. Personal responses are not given in this forum

  • Ipod nano 5th gen not recognized nano 2nd gen works fine.

    I have 2nd gen iPod Nano that works fine.
    I just upgraded to a 5th gen iPod Nano.
    Problem is can not find device in "My Computer" or on iTunes.
    I have switched USB ports.
    I have unistalled & reinstalled latest version of iTunes.
    I have made sure Windows is updated.
    I have gone into Device Manager uninstalled & reinstalled both using the Apple supports recomended way & as Windows suggests when I troubleshoot it.
    I still get the yellow exclamation point next to Apple Mobile Device driver with the dreaded code 10.
    Before I pull my hair out and bang my head against a brick wall any suggestions or help please!
    My OS is Windows XP pro.

    Hello livoryy
    It sounds like the battery just does not hold a charge. Check out the page below and look at the battery replacement section to get all the answers to what you are asking.
    Service Answer Center – iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Regards,
    -Norm G.

  • Ipod classic 5th gen not working

    I get a big red "X" with it pointing to Apple's support web page for the ipod, as well as the appearance of the Apple logo.  I tried going to the web page and troubleshooting, but to no avail. Help!

    First, do a regular Reset, which restarts the iPod. 
    http://support.apple.com/kb/ht1320
    If you get back to the same error screen, unfortunately, a common cause is a faulty hard drive.  You can try putting it into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect it to the computer and run iTunes.  iTunes may say something about "recovery" and prompt you to do a Restore.  If the cause was data corruption (not a physical hardware problem on the iPod), doing a Restore will erase the iPod, reinstall its software, and set it to default settings.

  • My iPod click wheel is not recognized by my computer or iTunes.

    I get the ok to disconnect, apple icon, and www.apple.com/support/ipod screens cycling through.  I bought it used and just installed a new (fully charged 1200mAh) battery.  Any ideas or is it dead beyond resurrection?

    You have a 4th gen Ipod.  First reset the ipod , then put it in disk mode. then plug it back into computer. That second icon of the folder  means it can't find an OS.  You might have to take it apart to see if you have the hard drive seated correctly and the hard drive ribbon. If none of this works, uplug and restart it, hold you ear to it and listen to see if you hear a clicking or buzzing sound. If you do the hard drive is bad. To do a reset -toggle the hold switch on the end by the screen then press and hold the center button and the menue button at the same time-then as soon as the apple comes up - press and hold the center button and the botton of the click wheel, disk mode should come up.  Plug back in and see if it comes up in itunes do a restore. The bottom of the click wheel is play- pause. It's also what you hold to shut it down.

  • My iPod classic is not recognized by my computer or iTunes

    My iPod is not recognized by my computer or iTunes. It worked fine a few months ago but now it doesn't even sync. I tried everything from turning it on/off, reinstalling iTunes, checking the connectivity issues and etc. After going through the connectivity test the only thing I found odd was that it said that the iPod classic running firmware 1.1.2 is not connected. Could that be the issue? And if so, how can I get that firmware running again?

    I have the same issue with my ipod classic, and have gone through these steps. However, when i come to the step where it says to reinstall: "
    Next, open the new version of iTunes and connect your iPod to your computer.
    Select your iPod in the source list and click "Check for Update" under the Summary tab.   iTunes will check to see if your iPod needs to be updated and perform the update for you. "
    there is no ipod listed in the source list to check for any updates under the summary tab. Itunes just DOES NOT see the ipod at all. And this is where I am stuck....further instructions PLEASE!!! Thank you....

  • I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync.

    I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb.  The problem I'm having is that it will not sync more than about 5.4gb worth of songs.  The iPod begins to freeze mid sync and the (-69) error message haults the sync process.  The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack.  Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause.  The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that.  Your advise would be enthusiastically received.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Maybe you are looking for

  • Why my iPhone Voice Memos sometimes randomly stop recording

    Hello everyone, I'm using my iPhone 6 Plus Voice Memos app to record my lecture in the university, the problem is sometimes the app stop recording and this is causing me major problem. Note that I'm putting my iPhone on Airplain mode to avoid stoppin

  • Satellite Pro M50: ATI Radeon Mobility 200 - Blue Screen error

    Hi, My girlfriend has a Satellite Pro M50, she bought it around 3 weeks ago, recently it has begun freezing while in general use (playing music, browsing web over wifi etc) and then it blue screens. The blue screen only stays on for a fraction of a s

  • Help....Using itunes in france with a french account but need it in english

    Hi, Hope someone can help. I live in France but I'm a british citizen. I've set up an itunes account but because I'm in France I've had to set it up in France.....I now can't understand anything!!! Does anyone know if I'm able to buy UK books etc on

  • I switched operating systems from PC to MAC what about my CS6?

    Hey - I bought photoshop cs6 recently(last fall) and now I have decided to change my operating system from a PC to a MAC how do I switch my program. When I bought the program I told the sales agent that I would be switicing OS soon and she said no pr

  • Problem with view based on Object Table

    When I try to create the Invoice view below SQL*Plus returns: "ORA-00904: invalid column name" My view appears to be correct. I doubt 'Expires' is a reserved word since if I NULL it out then the next column('Issued') causes the same error. Any sugges