IPod Classic 80GB 6th Gen,Restoring Problems

hi i really need help! :/
my iPod has frozen, I've been using it as removable disc to transfer some files,but while i was transferring the last file,i need to disconnect it from my computer and i did that without pressing "safely remove device from computer" and that's when the frizzing happened then I've reset it manually as usual and then for the first time it shown "use iTunes to restore". I've tried every technique for restoring it but nothing works,when i use iTunes to restore,it does the whole "restoring" thing but when it finally finishes it says do the same procedure again (this was with version 7.6 of iTunes) because with the 10th version just starts restoring it and it stops just a few seconds after ( The iPod "iPod" could not be restored. An unknown error occurred (1439) ). I've tried changing the usb port,updating the drivers,reconnecting the iPod several time,restoring it in disk mode,trying different versions of iTunes,using different computers, different cables, but nothing works. I've even tried to restore it using mac laptop with fire-wire (but when using the fire-wire didn't even recognized the iPod as a device) so I've tried with usb port on the mac laptop but even that didn't work (only the error was different error 1430 ). only LINUX is able to format it but thats about it! then I've tried the diagnostic mode and nothing,everything seems to be fine,but it still doesn't restores!
Could somebody PLEASE help!!!!!
Thanks

So what seems to be the problem then?  Does iTunes still see the device?  If so, just go ahead and sync it as you normally would.
B-rock

Similar Messages

  • Ipod classic 80GB 6th Gen Alarm not playing a Playlist

    Is this a software bug? my old iPod Video (5th Gen 30GB, software version 1.3) alarm plays a playlist with no problems.

    So what seems to be the problem then?  Does iTunes still see the device?  If so, just go ahead and sync it as you normally would.
    B-rock

  • IPod Classic 80GB 6th Gen help

    I put my ipod on the usb cord. Windows gives me a scan and fix (recommended) window. I click scan and fix. Then it gives me a window that says check and fix problems. So I click check on Automatically fix file system errors and scan for and attempt recovery of bad sectors. I click start.
    "Some problems were found and fixed. any files that were affected by these problems were moved to a folder named 'found' on the device or disk. Your device or disk is now ready to use.
    If you removed the device or disk before all files were fully written to it, parts of some files may still be missing. If so,go back to the source and recopy those files to your device or disk."

    So what seems to be the problem then?  Does iTunes still see the device?  If so, just go ahead and sync it as you normally would.
    B-rock

  • Cover flow on ipod classic 160gb 6th gen

    I was just given an ipod classic 160gb 6th gen, it the previous owners music on it, so I hooked it up to itunes & restored it & updated it to factory settings & put my name on it. I noticed in cover flow mode, that albums are doubled, one for the entire album, then the album cover again for individual songs. when I go to album view, the albums show up ok, there are no double ups there. I also notice when I scroll down to the now playing with the split screen, it comes up blank with no cover art. I had an 80gb 5th gen ipod & everything seemed ok. I wiped it clean with a restore as well to start fresh. It took about an hour & a half to sync over my music library from my external hard drive to my new 160 gb 6th gen ipod. It seems to play ok, so far, I just got it today, & I have been playing it on & off to try it out.
    I am running itunes 9.0.1.8. Also when I plug in my ipod, itunes ops up with an update message for me to update, I click ok for the update, but nothing seems to happen, so I do not know if itunes has updated or not.
    Message was edited by: Sossity

    Sossity wrote:
    Ok, should I try the trialing X, for those persistent multi covers that do not respond to adjusting the track names as first suggested? I went to your tips page & saw the graphic for that. Is it ok to just leave the Xs in or must they be removed?
    iTunes tries to be "smart" and only updates the tag if it thinks you've changed something. Adding the X is a temporary measure to force iTunes to acknowlege that something has changed and thereby hopefully merge the album. Once it's done you can get rid of the unecessary trailing Xs.
    I also looked at your image for handling multi discs, will this group multi discs together in cover flow?
    Yes, that's the point.
    & when one is playing a multi disc set, will the ipod just go straight to the next disc (disc 2) in playback as though it were one single album?
    Yes.
    or will playback stop at the last track of disc 1 & then one would have to select disc 2 to play.
    No.
    Will the multi disc set still come up as 2 different discs to selct to play? I may not want to start with disc 1.
    No. You can always chose which track to start playing.
    One of the albums I was having trouble with multi covers was part of a 2 disc set, disc 1 was credited to the main artist, but had guest artists for 1/2 the tracks, disc 2 was by the same artist with no guest artists. I have now gotten disc 1 to show as a single cover in cover flow by checking off part of a compilation in the info panel, but it does not appear next to disc 2 in cover flow.
    Again setting *Part of a compilation" is the wrong approach. Set *Part of a compilation* to No, put your guest artist info. into the track titles (or any other scheme you choose) and make sure that the Artist value is consistent for all tracks.
    on an off note, I notice when I press my ipod button or navigate any of its features, there is a slight grinding noise, I can hear the hard drive, when I bring it close to my ear, it sounds like a chewing mouse is this ok/normal to hear slight noises? it seems to be functioning alright. It is pretty responsive.
    Yes, the noise from disc activity is normal. My iPod lives in a silcone sleeve which probably muffles it a bit and most of the time I'll have already have music playing so I'm rarely conscious of the noise of hard drive activity but it is there.
    tt2

  • I have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me

    i have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me.is there any software to reset it

    Hello adifromba
    Try putting your iPod Classic into Disk Mode to force a restore within iTunes to get it to show up. The steps to do that are within the first article below, I have also provided a second article for further troubleshooting if it continues to not show up.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Regards,
    -Norm G.

  • IPod classic 160GB 6th gen not sync after HDD & ribbon cable replacement

    I recently replaced my iPod 6th gen HDD and ribbon cable, but when I connect it to my PC and iTunes recognizes it, I can't sync or load music to it 'cause it displays an 1439 error, What can I do?

    I assume you have tried everything in this article? And I do mean everything.
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    Have you tried restoring it another available Mac or PC to see if the problem persists there?
    B-rock

  • Need software/firmware 1.0.0 to Ipod Classic 80Gb 5-gen

    I need the old firmware, the new ones wont work with my dock. Anybody who knows where I can find it?

    I agree with Jeff's comment about Pioneer - if they state that the iPod is compatible with their head unit, then they (Pioneer) should support it and not Apple. Again, as Jeff says, how can Apple support every 3rd party product that is produced?
    I've just checked the Pioneer web site and although I did not find the AVIC X3-BT that you mentioned, I did find the AVIC-X3 (http://www.pioneer.co.uk/uk/products/archive/AVIC-X3/index.html) and I see that it is only compatible with iPods up to August 2007. It is not listed on the Pioneer.no site, so perhaps it was never available there.
    The AVIC-X3-II which *is shown on the Norwegian site* (http://www.pioneer.no/no/products/25/111/241/AVIC-X3-II/specs.html) states that it is compatible with iPods up to September 2007, but specifically excludes the iPod Touch (introduced that month). This is the same month that the original Classic was introduced. So - first thing - work out exactly which model of iPod you have (http://support.apple.com/kb/HT1353). If yours is a Classic, introduced in September 2007, then there may be an issue, but that is up to Pioneer to sort out, perhaps with an update to their product.
    I did look for the AVIC-X3-BT on both web sites, but as far as I can tell (with my Norwegian!) it is not there.
    I also found a forum specifically about the AVIC X3, at http://www.avicx1forums.com/forum/viewforum.php?f=6 and this post (http://www.avicx1forums.com/forum/viewtopic.php?t=1617) in particular about the Classic not working with the AVIC X3. In his reply, Oliver says that there is a problem with the Classic (at the Pioneer end) and he advises the original poster to contact Pioneer Customer Services by phone.
    By the way, your English is better than my Norwegian, I guarantee it!
    Med vennlig hilsen,
    Phil
    Message was edited by: the fiend

  • IPod Classic - 80GB - Invalid Index Key. Won't Sync.

    So, my friend recently gave me his old iPod Classic 80gb 6th generation. I restored it, then began to sync it with my itunes library. It began to sync, but then froze. iTunes and Finder became frozen. I had to force quit iTunes and then unplug the iPod and restart finder to get everything in order. The iPod still doesn't work. I ran the disk utility and got the results as follows.
    http://i47.tinypic.com/mu8mft.jpg
    I would really appreciate a free solution to this problem as I can't live without my music.
    Thank you very much.

    So I had a similar problem on my 120 gig classic. After months of go around with the repairs department, we finally figured out the problem. ITUNES 9.0.3, KILLS THE HARD DRIVE on classics. What you need to do is get apple support to send you a REPLACEMENT, do NOT accept a repair, as they are idiots and only try to sync maybe one song, don't get the problem, and will send it RIGHT back to you, unfixed. Believe me, it is a Hard Drive issue. Once you get your new ipod, UNINSTALL itunes 9, and go back to using 8.2.1, it will work believe me. Hope this helps.

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • Can you get Bluetooth for ipod classic 80GB (model MB029LL)

    Hi ,
    I would like to get a Bluetooth adapter/dongle for my ipod classis 80gb 6th gen to connect to my car kit. Is this possible, does anyone have any recommendations on what to buy & were . thanks

    Here is one such adapter/dongle that supports A2DP.
    http://www.amazon.com/Sony-Bluetooth-Wireless-Transmitter-Black/dp/B000XRW09Y
    B-rock

  • IPod Classic 80gb, 5/6th gen doesn´t work properly with Renault Media Nav?

    Hello,
    I really hope, anyone in here can I help me. Recently I got an new Renault including the Media Nav Radio System. I wanted to use an Ipod Classic 80gb, 5 or 6th gen. I connect it via USB an everything is fine. The problem that is annoying me, is that if I shut down the Radio by closing the doors with the key an start the Media Nav afterwards, the iPod everytime starts playing from the "All-Songs"-Playlist and not from the point of playback I was listening to, as I stopped playing music. The iPod touch 4g (8gb) in contrast works fine and without any problems.
    My question now is: is it possible in general to use the iPod Classic properly or are the Software versions used in Media Nav and iPod incompatible?
    Thanks a lot for your help!

    So I had a similar problem on my 120 gig classic. After months of go around with the repairs department, we finally figured out the problem. ITUNES 9.0.3, KILLS THE HARD DRIVE on classics. What you need to do is get apple support to send you a REPLACEMENT, do NOT accept a repair, as they are idiots and only try to sync maybe one song, don't get the problem, and will send it RIGHT back to you, unfixed. Believe me, it is a Hard Drive issue. Once you get your new ipod, UNINSTALL itunes 9, and go back to using 8.2.1, it will work believe me. Hope this helps.

  • My apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. can't restore.

    my apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. the only way to unfreeze it is by detatching the ipod or resetting with menu/centre (until it loads up again, where it immediately unfreezes and comes up with a load of messages saying "cannot read iPod" and when i try and restore it by pressing menu/centre button while it's plugged in, it says "cannot restore as it is being used by another program" or "error 1415". Any ideas how to sort this out? hope i haven't majorly screwed it up. thanks.

    Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

  • Restoring a used Ipod Classic 80gb I bought

    Hello,
    I bought a used Ipod Classic 80gb after my Ipod 30gb 5th generation was stolen.
    In order to use this "new" ipod I had to download a newer Itunes version and do some changes. This Ipod I bought (that's 100% authentic) needs to be restored to a windows formatted version, when I hit RESTORE. It says it has to download something and afterwards it says the connection time expired and that I need to check my network properties. They seem to be working ok!!!!!.....at least the Ipod is being recognized by the computer at last but HOW CAN I RESTORE IT!?!?! WHAT IS HAPPENING!!??!?
    PLEASE HELP!!!!

    *Hay man That same problem happened to me when I wanted to update to 1.1.2. I kept trying but download doesn't complete. I went to a friend's house with a higher bandwidth and installed the iTunse and it worked fine. Maybe it was just my connection or something else. Try it. It might help. ;)*

  • I am Having iPOD Classic 80GB.On Sync. a message tells that it is not able toread the ipod contents -restore to factory settings-on restoring it tells that it can not be restored as it has files that are used by other applications. Pl advice

    I am having iPOD classic 80GB . I Have the 10.5Latest Version of iTunes installed. When I go for Sync.It tells me to restore to factory settings as it is unable to read the contents. On restoring it tells : unable to restore as this has files that are in use by another application. I have no idea what to do now. Pl advise. Thanks

    Try disabling any and all A/V or security software you are running on your system and see if that helps.
    B-rock

  • Weird problems with ipod classic 80gb, hdd's gone?

    Hi, hope u could help me.
    Excuse my not fluent english, I'm not british/american so I will try to make myself as clear as possible. Thanks
    First of all, got iPod classic 80gb, systems Vista/XP, was trying to cope with this problem on both computers, but ran out of ideas, so decided to make a topic on Apple forum.
    Few days ago my iPod was working fine, then I put some stuff on it (put them in 'Notes', using iPod as a pendrive) and weird things started to happen. Maybe it has something to do with it, don't know, but will try to write as many details as possible.
    When I connect my iPod to the computer (i tried on 3 computers), every time my Windows doesn't recognize an iPod (computer sees something has been connected, but doesn't see what). So if I go to 'Computer' I even do not see an iPod disc.
    I can't open iTunes when iPod is connected, but once I disconnect my iPod, iTunes opens immediately. If I open iTunes before connecting an iPod, iTunes works fine but it can't see an iPod as well. (I used an option with checking connection with iPod but it sees nothing unfortunetely).
    Later, when I want to disconnect my iPod using 'safe remove hardware' it doesn't work, just hangs.. so I have to unplug my iPod and once I do it, it immediately appears 'USB xxxxx now can be disconnect safely' (something like that, very similiar to the iTunes case).
    When I disconnect my iPod, it just hangs showing 'Connected, do not disconnect', sth like that, so I got to restart it and then works fine.
    My iPod works fine without connecting to the computer, everything is just fine.
    Any ideas? Already tried to reset settings on iPod and tried to re-install iTunes, but I guess problems lays somewhere beetween iPod and computer which doesn't see my iPod.. Also I tried to re-install USB slots/drivers, didn't help.
    Thanks in advance.
    Cheers, Robert.
    Message was edited by: TheBadkins
    Message was edited by: TheBadkins

    When I had Windows XP on a Lenovo, I also had a U2 20Gb iPod...The problem was, believe it or not, the battery! I took it to ipodrepair in Toronto, and they said there was some servo or switch that was blown. It couldn't charge properly and when it was connected to the computer, it went into limbo - not able to charge, not able to load the ipod.
    So, check with repair if you can...It may be the battery, even on a new one!
    Good Luck!

Maybe you are looking for