IPod Classic 80gb - Hold Switch Problem

When the hold swith is turned to ON
The screen shows the HOLD' Icon and it Blinks
Sometimes when the IPod is OFF it Turns itself ON because of this.
What can I do?

No, the iTunes Store doesn't make any podcasts (except maybe New Music Tuesday... or is that one gone again...?). But it could be an issue with the people who make the podcast.

Similar Messages

  • IPod Classic 160gb hold switch problem

    Sorry if this has been asked and answered before, but my searches were coming up a bit short. I've got a friend who purchased a 160GB classic, and since buying it she has been unable to use the hold switch to keep buttons from getting pressed and turning the iPod on while sleeping (say, in a backpack, etc.).
    I personally just restored the software to 1.1.1 and have done several resets, etc. I have been successful in getting the device to hold while off a total of 4 times. What happens is that you can put the device to sleep either by holding play/pause, or using the sleep menu item, and that works fine. The problem is when you then try to lock it in sleep, it turns on, and stays on indefinitely. While in this "on and locked" state, it's not playing music or really doing anything other than displaying the menu.
    Any help is appreciated. I did nothing but talk up the iPod to her until she went and bought one, now she's regretting her purchase.
    Thanks in advance.

    A restore would have ruled out the possibility of corrupted software/data. So at this point, we can be certain that the hold switch is faulty and needs to be replaced. Either that or replace the entire iPod.
    Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    There are also third party services out there that will cost less. Just Google for "iPod repair" and you should get a number of hits.
    B-rock

  • Ipod classic 80gb video podcasts problem

    i have a 80gb ipod classic and when i try to watch video podcasts on it, it will play for about 4 minutes and then either quit playing it or will restart the iPod all together. i have restored my ipod in itunes 7 & 8, and both did nothing to help this problem. does anyone have anything to say do tell me to do to help with this problem?

    No, the iTunes Store doesn't make any podcasts (except maybe New Music Tuesday... or is that one gone again...?). But it could be an issue with the people who make the podcast.

  • HT1363 my IPod Classic 160GB. hold switch stuck to "hold"

    Have already "restored" the factory settings yet the hold switch doesn't seem to function. It remains locked regardless of how many times I slide it? Any thoughts?  Padre

    A restore would have ruled out the possibility of corrupted software/data. So at this point, we can be certain that the hold switch is faulty and needs to be replaced. Either that or replace the entire iPod.
    Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    There are also third party services out there that will cost less. Just Google for "iPod repair" and you should get a number of hits.
    B-rock

  • Weird problems with ipod classic 80gb, hdd's gone?

    Hi, hope u could help me.
    Excuse my not fluent english, I'm not british/american so I will try to make myself as clear as possible. Thanks
    First of all, got iPod classic 80gb, systems Vista/XP, was trying to cope with this problem on both computers, but ran out of ideas, so decided to make a topic on Apple forum.
    Few days ago my iPod was working fine, then I put some stuff on it (put them in 'Notes', using iPod as a pendrive) and weird things started to happen. Maybe it has something to do with it, don't know, but will try to write as many details as possible.
    When I connect my iPod to the computer (i tried on 3 computers), every time my Windows doesn't recognize an iPod (computer sees something has been connected, but doesn't see what). So if I go to 'Computer' I even do not see an iPod disc.
    I can't open iTunes when iPod is connected, but once I disconnect my iPod, iTunes opens immediately. If I open iTunes before connecting an iPod, iTunes works fine but it can't see an iPod as well. (I used an option with checking connection with iPod but it sees nothing unfortunetely).
    Later, when I want to disconnect my iPod using 'safe remove hardware' it doesn't work, just hangs.. so I have to unplug my iPod and once I do it, it immediately appears 'USB xxxxx now can be disconnect safely' (something like that, very similiar to the iTunes case).
    When I disconnect my iPod, it just hangs showing 'Connected, do not disconnect', sth like that, so I got to restart it and then works fine.
    My iPod works fine without connecting to the computer, everything is just fine.
    Any ideas? Already tried to reset settings on iPod and tried to re-install iTunes, but I guess problems lays somewhere beetween iPod and computer which doesn't see my iPod.. Also I tried to re-install USB slots/drivers, didn't help.
    Thanks in advance.
    Cheers, Robert.
    Message was edited by: TheBadkins
    Message was edited by: TheBadkins

    When I had Windows XP on a Lenovo, I also had a U2 20Gb iPod...The problem was, believe it or not, the battery! I took it to ipodrepair in Toronto, and they said there was some servo or switch that was blown. It couldn't charge properly and when it was connected to the computer, it went into limbo - not able to charge, not able to load the ipod.
    So, check with repair if you can...It may be the battery, even on a new one!
    Good Luck!

  • IPod Classic 80Gb intermittent problems

    My iPod Classic 80Gb is starting to become a bit tempremental especially when used in the car but also at home although right now it is playing away fine through my hi-fi system. What happens is that seemingly at random the Apple logo appears on the screen and the device resets itself which is quite annoying when you're driving along. This iPod is now 6 years old and has the original battery and so the problems I am having might be due to the battery getting old.
    In the car I am playing it through a Parrot MKi9200 bluetooth car kit http://www.parrot.com/uk/products/hands-free-car-kits/parrot-mki9200/ which connects using the 30 pin connector although I could also use the 3.5mm jack but that doesn't display the song being played on the small LCD screen. At home I am playing it mostly through the 3.5mm jack to RCA (phono) into the aux input on my amplifier.
    My iPod is synced with iTunes quite often as I'm always adding more music and the battery seems generally to be well topped up. There are times when I've been on a long car journey when the iPod obviously stops because the battery has gone too low but the majority of journeys in the car are short ones around town when the battery isn't getting too low. When the battery has gone too low it takes a while to get the iPod going again as the battery has to be charged before anything happens, whereas these freezes when the Apple screen comes up are short things which the iPod recovers from fairly quickly.
    What I am trying to work out is if a new battery would solve the problems I am having or whether there might be something else needing replaced as well. If it was just the battery then I'd probably replace it but if it is more than that then I'd rather put the money I'd spend repairing it into a new iPod. Having said that I've heard that you can put a solid state hard drive in an iPod and I'm wondering if Apple will be releasing an iPod with a large ss hard drive as I think I read the current iPod Classic was to be the last in the line.

    Hi Snoopyathome.
    You have the inccorect cable for the classic 80/160. The cable you have is described on this link: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=B5F 4A608&fnode=home/shopipod/ipod_accessories/cablesdocks&nplm=M9765G/B .
    This is the incorrect cable for the classic. The cable you purchased plugs into the earphone jack and can be used with previous versions of the iopd, including "ipod with color Display" and "ipod with video". This exclused the classic 80 and classic 160.
    The proper cable can be found at this link: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=4D7 9909E&fnode=home/shopipod/ipod_accessories/cablesdocks&nplm=MB129LL/A .
    When I went to the ipod store here they tried to sell me that cable you purchased. Luckily, I had already been to the website to look for info about connections. I use the mb129ll/a with my classic 80 and it works perfectly.
    The mb129ll/a also works with previous ipods listed at the bottom of the page on the link I place here.
    Good luck to you.
    Message was edited by: david-iPod80Gb

  • Ipod classic 80gb shows blank white screen

    I have an Ipod classic 80gb. I was having sync issues w/ itunes so I restored it using the itunes restore button. All good, it said it was updating my Ipod software and all went well. Then upon restart of the Ipod at the completion of the software update, no apple icon or anything. Just a blank white screen. The click wheel and all buttons still function as does the hold switch. I have tried resetting it (Menu and select) numerous times to no avail. I have tried restoring it and everything else with no result either. Connect it to my computer, Itunes sees it, syncs with it and all is well, just a blank white screen. Any help would be greatly appreciated!

    I also have this problem. I've been living with it for about 3-4 months. My iPod classic 60gb will happily play music, connect to computers, and do every other function is has...the problem is I can't see what functions I'm selecting because of the blank screen - the back light is on, but none of the details seems to get loaded.
    So in theory, it's like using my iPod with my eyes shut - blindly navigating.
    This started happening around the time I got a car fm transmitter to use with it, so possibly the use of this may have corrupted the display?
    I'm still at a loss of how to fix this, other than taking it to get repaired somehow. Anyone else having this problem, or have a solution?

  • Why do I have to keep resetting my iPod classic 80gb?

    Hi all
    I received my black iPod classic 80GB yesterday (replacing one I had stolen, which until that point I had absolutely no problems with).
    I am manually updating this iPod, so am importing albums to my MacBook iTunes and then connecting my iPod, adding the music, and ejecting then disconnecting my iPod.
    If I then leave it for between half an hour / an hour (while importing another artist), the iPod does not respond to any key touches. I have to reset it before there is any life in it. Also, when I pressed play this morning to see if it was still happening, the first thing it did was show the Apple logo (as if it had just reset itself without my toggling hold or pressing down menu and centre for 6 seconds).
    Why does this happen? Am I doing something wrong?
    Please help. This is very annoying!
    Chris

    Hi Patrick,
    I tried that last night, and unfortunately still had the same problem. I have now arranged to return the iPod in exchange for a replacement. Hopefully this was a one off! Thanks anyway.
    I'd be interested to hear of any other advice in case it happens again when I receive my replacement!
    Chris

  • Hold Switch Problems

    Recently, my 2GB iPod Nano's hold switch began giving me problems when I accidently pushed the hold switch too hard too fast and it caused the hold switch to become disconnected from the slider. It is now pushed down just enough to were the hold switch slider just slides back and forth uselessly. It is always in the locked position. I know that there is probably some way too fix this but I haven't thought of it yet. I am currently waiting for the iPod remote ( w/ hold switch) to arrive and as of today that will be my next plan of action. Also, I have already sent the iPod to apple and they said they wouldn't fix it because it was accidental damage or abuse and that isn't covered under the warrenty . ( Well they would fix it but they wanted 205.00 USD) Does anybody have any ideas?
    eMachines T2792   Windows XP   80GB Hard Drive, 256 RAM, Intel eXtreme Graphics

    Welcome to Apple Discussions!
    There are other places that can fix your iPod other than Apple. For example, try checking out iPod ResQ, or Broken iPods.
    Of course, you could possibly take it apart yourself, and try to put the hold switch back together. Note that doing this will will discontinue your current Apple warranty on your iPod.
    I hope this helps!
    -Kylene

  • My apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. can't restore.

    my apple ipod classic 80gb says there is no music - anything on my ipod, but says it only has 37gb free. Then i try and plug it into my pc with iTunes on (i've set it to do not automatically sync devices) but it still freezes every time. the only way to unfreeze it is by detatching the ipod or resetting with menu/centre (until it loads up again, where it immediately unfreezes and comes up with a load of messages saying "cannot read iPod" and when i try and restore it by pressing menu/centre button while it's plugged in, it says "cannot restore as it is being used by another program" or "error 1415". Any ideas how to sort this out? hope i haven't majorly screwed it up. thanks.

    Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

  • IPod classic 80GB suddenly stops showing on iTunes both on explorer and finder (I use windows 7 and Mac OSX) Any help?Tried everything nothing works!!!

    Hello everyone.
    I have bought an (admittedly used) iPod classic 80GB on New Year's this year.For the better part of this month it was working beautifully.I was lucky that I got it.But just a week ago,it started bugging out.It would mount on iTunes and I would drag and drop music and videos on it but could only do it one at a time or it froze.This continued on for a couple days then finally yesterday it won't show on itunes at all.I tried resetting it,changing usb ports but it still wouldn't show except on plugged devices on ''Computer'' and on Finder (I have been trying to make it show on my macbook as well with no luck either)
    I ever resorted to trying to remove completely and reinstall iTunes.still won't show and unfortunately for some reason whenever I try to reinstall it now on my windows 7 it says something about it ''missing a key'' and stopping the installation.
    Can anyone offer me any solutions?I am growing pretty desperate here as the last time i managed to do a ''drag and drop'' to put my videos and music in it,any movie I dropped into the iPod,even though it shows on the device,it won't play at all -.-
    PS.The ipod had been updated and formatted on my windows 7 if that helps any....
    PS2.I had restored my iPod twice both on Windows 7 and on my MacBook when the freezing issue had happened when i plugged it in on my PC.It is currently updated and formatted on windows
    PS3.iPod is on disk mode already and now still can't reinstall itunes 11
    SOS Someone help me Offer me some solutions other than the ones I've already tried??

    I am still having the problem. I have noticed a pattern to the seemingly random freezes.
    The iPod is stopping to Sync at almost predictable points during the sync. The first stoppage occurs around the 1.9GB part of the sync. This has not always been the same file but it is always around the same place.
    When I sync in small chunks the freeze occurs at almost the same place every time. As soon as it freezes, iTunes is toast and the entire computer needs to be restarted.
    Anyways, the freeze happens around every 2GB's of data transferred. It does not have to be in one chunk, it is almost like it is happening on the iPod. Like the iPod is kicking itself out of the sync at certain points along it's hard drive or something. Once it freezes and I restart the computer, I can transfer another 2 GB before it freezes again... then restart, repeat. Finally I was able to load up the 14.8 GB I had in my iTunes. Several hours later... not sure if I should take the iPod back or not. If it is the iPod and that fixes the problem great... but if it is my machine, I get another 3-4 hours syncing and restarting my computer. Wheeee!

  • Ipod Classic 80gb won´t work with apple universal dock and remote

    I own 2 ipods a 5th generation 60gb and an ipod classic 60gb. I've just bought an apple universal dock with remote and the original apple component and composite AV cables. I connected the universal dock to my TV via the composite cable, with my ipod 5th gen I can watch videos on the TV and control the ipod with the apple remote but when I connect my ipod classic to the universal dock it will charge but I can´t get any video out or control the ipod with the remote. It's as if the ipod classic doesn't recognize the universal dock and it keeps showing the connect the video accessory screen, even when i tried using the apple component AV cable. I dont think the problem is with the universal dock because it works fine with my Ipod video 60gb, but with my Ipod Classic 80gb the remote control and video out won't work at all, i can´t even control the playback of audio playlists. Does anyone know why that is happenning? Please help me!

    I have the Classic 80gb also...same probem. I retuned the Apple Universal Dock and purchased one that was half the price. Pluged it in and it works perfectly! So my advice would be to save some money and get products that work.

  • IPod Classic 80Gb, wont show up in iTunes 8, but does in Finder

    Just plugged my iPod classic 80Gb in and it wont show in iTunes 8, although it shows up in Finder
    Tried a iPod reset. restarted my Mac but no good.
    Come on man I need to do a sync....

    I have a similar problem.
    This morning, all music was gone from my iPod, just like that. I had been having troubles with playing a couple of songs last night if that's connected. Anyway, I connect it to my Macbook. I try to reset it through iTunes and that was done, I pressed eject and ejected it when it said OK to disconnect -- although when I did so it said it wasn't ejected properly. Now when I connect it appears in Finder as a device (like that thingy that appears when you install stuff, a white thing) but it doesn't in iTunes. In fact, as soon as I plug it in iTunes freezes and I can't open it or do anything in there, the marker just shows that it's loading.
    What do I do?

  • My ipod classic 80gb is not showing my music lists on my laptop

    My ipod classic 80gb is not displaying my music lists on my laptop after logging in to itunes !!!!

    Your "music list" in iTunes is in your iTunes library, not your iPod, so I don't understand what you are describing.
    In iTunes, select Music under LIBRARY in the iTunes sidebar.
    NOTE:  If the iTunes sidebar (along left side of window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.
    That is your list of songs in iTunes, and it is there whether your iPod is connected or not. 
    When you connect the iPod, it should appear under DEVICES in the sidebar.  Click the small triangle to the left of the iPod name, to drop down the iPod's content list (indented below the iPod).  Click on Music there.  To the right, the list of songs on the iPod is shown.  That list is separate from your iTunes library music list.
    Can you describe the problem in your problem in more detail?

  • I traded my iPod Classic 80GB at the apple store for a junk one.

    I recently traded my iPod Classic 80GB for a new one because my friends dock messed up my iPod. Then I received a "new one" (notice the quotes). This didn't seem like it was new. I got home and synchronized it to my iTunes. I ejected it properly and all the stuff like that. I picked a song and it played properly but, when i pressed the menu button it did nothing. So, I kept pressing it and eventually got it when I pressed it very hard, which shouldn't happen. I tested all the other buttons and i realized that the menu button didn't work properly, the play/pause button wasn't stable (you have to press it hard and hold it completely still until it turned off or played a song, the next song button didnt work, the iPod could not reset because of the broken buttons and everything was "laggy." (Meaning that the scrolling the volume up and down had a slow, very choppy movements). Also when it would go to another screen it would take about 3-7 seconds to react. When I tested my friends iPod Classic 80GB, it did not do any of this. Just the other day I tried to reset it (holding down the play/pause button and the center button) then all the buttons stopped working. I pressed every single button it did not work. It didn't even reset. Would I get a new one if I brought it back to the apple store?

    The entire point of any warranty is that it guarantees against manufacturer defect for the term of the warranty.  There is no guarantee past the warranty period.  This is the way a warranty works.

Maybe you are looking for

  • File transfer via socket problem (with source code)

    I have a problem with this simple client/server filetransfer program. When I run it, only half the file is transfered via the net? Can someone point out to me why this is happening? Client: import java.net.*; import java.io.*;      public class Clien

  • How do I read and write files on a mac?

    On my windows it's easy, but when I try to write files and read them on a Mac the filepath is always wrong. I want to write to my "Documents" folder, and when I do /Documents/Hello.txt as a filepath it gets it wrong. I don't know why it won't work be

  • Dynamic runtime shared libraries in Flash

    Runtime shared libraries in Flash only seem to work if there is a direct import link into the file that wishes to use the shared library item. Why can't the main swf dynamically load a shared.swf containing the shared library items into itself and th

  • GETTING ERROR INVALID IDETIFIER

    NEED HELP ASAP!!!!!! ERROR MARKED AGAINT THE LINE...SEE THE LAST FEW LINWS FRM FORALL STMT declare type summary_upd_tab is table of summary%rowtype; summary_upd_var summary_upd_tab; begin select user_id, min(start_time_utc), max(end_time_utc), sum(du

  • Secure functionality Ultra Search Portlet

    Hi, what do I have to do that the "Ultra Search Portlet" supports acl-functionality? If I activate a acl for a data source, then no results are displayed.