Ipod classic and itunes 11.1.5 Does NOT work

This is really unacceptable. I've had iTunes running seamlessly with all my IPod Classics through a Toshiba laptop and Windows Vista premium home edition for years.
Today I accept the prompt to finally upgrade to ITunes 11.1.5 and guess what. iTunes doesn't even recognise my Ipod classic anymore ( it doesn't even show as connected) and my ipod classic is sayings it's got no songs on it. I had over 20000 songs on it and my ITunes library seems to still be in good order so this is just crazy.
Why an updated version of ITunes isn't tested to at least the basic degree of having it compatible with all the relevant apple products it's supposed to work with is beyond me.
I would expect as an Apple customer that when I accept a software update that when I plug in my device it would work as well as or even better than it did with the version I just upgraded from.
So my question is when is this going to get fixed without me having to churn through pages of online documentation and try various things that may or may not work to solve my issue.
This is ridiculous. Come on Apple - you are better than this surely.
Can someone please help. I have a small fortune in Apple gear that now is useless because of this new incompatibility.

Try Andrei Cerbu's post here
I had the same problem last night, and this just worked for me.

Similar Messages

  • My ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    iOS: Device not Recognized in iTunes for Windows

  • How do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunes

    how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl

    Place the iPod in recovery mode using this program. and then restore via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What do i do if my ipod 3 is disabled and the power off button does not work?

    What do I do if my iPod 3 is disabled and  the power off button does not work?

    Did you try restoring your iPod on itunes.

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

    I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

    It is not possible to merge Apple IDs. 
    Why did you create a new one?

  • HT1202 The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.

    The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.
    How can I transfer my music to a second computer iTune?
    Thanks,

    See this user tip
    Syncing iPhone to a "New" Computer or replacing a "crashed" Hard Drive

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • ITunes 9 Home Sharing does not work on Windows 7 x64

    iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

  • My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reloading software and reset to original factory settings.

    My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reseting to original settings and reset the operating software.  Any ideas?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Why can't I delete files in iTunes? NO DELETE does NOT work.

    iTunes 11.1 will not delete files from list, and NO the delete key does not work for that thanks.

    I'd recommend just giving up on the List View in iTunes. As far as I can tell, you CANNOT get rid of anything in that view. If there's a cloud icon, the episode is out there in the ether and you can download it; if there's no cloud, I guess it's on your computer already. Basically it's in permanent "Show All Available Episodes" mode, and that's the only choice available.
    Use the "My Podcasts" or "My Stations" view (or a smart playlist) instead to see what podcast episodes are actually on your computer.
    I've also found that deleting podcast episodes doesn't seem to be a permanent solution: iTunes will want to download them again, because after all, you didn't play the podcast, right? You must have made a mistake by deleting something you hadn't played yet! (WHY they've set it up this way is beyond me.) To get rid of a podcast episode off your computer, mark it as played, and then re-sync.

  • I updated to 6.1.3 on my iPaad 1, and now my app store does not work.  What should I do?

    I updated to 6.1.3 on my iPad 1, and now my app store does not work.  What should I do?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Maybe you are looking for

  • Po price comparison report

    Dear Experts, We want to any standard report for purchase order price comparison. Same material purchasing  two or more  than two vendor and two different purchasing group. Thanks & Regards, Ranjeet

  • How to display attachment and delete temporary file  in Workflow

    Hello I have one question regarding function module SAP_WAPI_DIALOG_NOTES_DISPLAY. When a text file is selected, the target file is downloaded to Sapworkdir, and it's automatically deleted after displaying, This is pretty good behavior. But an Excel

  • Can't update Ios5 says I need 10.5 which I have..

    So I try to update to IOS5 and every time I do a message pops up saying I need itunes 10.5(which i've already downloaded) and every time it checks for the update it says there are none and that I dont need to update anything. Yet every time I try to

  • Photoshop  CS6 freezes computer

    Hi, Running 64bit Win 7 Dell Studion XPS system.  I originally installed the Master Suite, but it hung on the Acrobat X install.  So I went in and uninstalled Photoshop and reinstalled it.  All other programs in Suite work.  Installed a brand new shi

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone, I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and import