IPod Classic case - 7th Gen

I can't find anything! It seems manufacturers stopped making cases with Gen 6. I'm looking for something acrylic or that provides good protection. I'm using the same case from my 160gb classic gen 6, a Power Support Crystal jacket - http://www.powersupportusa.com/accessories/ipod-classic.html. I love the case but the new iPod is loose in the case and they didn't come out with a new one. Any ideas? Thanks.

I bought this hard case for my iPod. I like it but you are right, there isn't a lot of choice out there!

Similar Messages

Mc293qb/a is this a 6th gen ipod classic or 7th gen

Mc293qb/a is this a 6th gen ipod classic or 7th gen and how can you tell from the serial number what year it was produced.

It's a seventh.
(113039)

IPod Classic 160gb (7th Gen) making odd noises through internal speaker

I bought an iPod Classic off a friend, and within a day or so of syncing it to my iTunes it started to make this strange "chirp" noise through the internal speaker. It is the same noise the iPod makes if you boot into Diagnostic Mode. It was making this noise randomly when browsing songs or scrolling through the main menu.
I had a warranty through the store it was purchased at so I exchanged it for a new one. After syncing it with iTunes again it made the same noise through the internal speaker. I turned the "Clicker" sound off in settings to see if that would eliminate the noise, and it did, until I synced the iPod a few minutes later and it made the noise once, again.
I've seen other posts on the web with people having this issue, but no solutions. Anybody have any ideas? Or is it just something I have to live with, or keep exchaging iPods?

It seems to be making this noise whenever it has to load information. If I scroll through the cover flow really quickly and get to a section of albums that haven't had their art loaded, it makes the noises as it loads the art.
Seems like any time the iPod has to find and display information from the hard drive that it doesn't have cached it makes the noise. Is this normal or should I be seeking another replacement? I don't want a bad hard drive on my hands.

Cover flow on ipod classic 160gb 6th gen

I was just given an ipod classic 160gb 6th gen, it the previous owners music on it, so I hooked it up to itunes & restored it & updated it to factory settings & put my name on it. I noticed in cover flow mode, that albums are doubled, one for the entire album, then the album cover again for individual songs. when I go to album view, the albums show up ok, there are no double ups there. I also notice when I scroll down to the now playing with the split screen, it comes up blank with no cover art. I had an 80gb 5th gen ipod & everything seemed ok. I wiped it clean with a restore as well to start fresh. It took about an hour & a half to sync over my music library from my external hard drive to my new 160 gb 6th gen ipod. It seems to play ok, so far, I just got it today, & I have been playing it on & off to try it out.
I am running itunes 9.0.1.8. Also when I plug in my ipod, itunes ops up with an update message for me to update, I click ok for the update, but nothing seems to happen, so I do not know if itunes has updated or not.
Message was edited by: Sossity

Sossity wrote:
Ok, should I try the trialing X, for those persistent multi covers that do not respond to adjusting the track names as first suggested? I went to your tips page & saw the graphic for that. Is it ok to just leave the Xs in or must they be removed?
iTunes tries to be "smart" and only updates the tag if it thinks you've changed something. Adding the X is a temporary measure to force iTunes to acknowlege that something has changed and thereby hopefully merge the album. Once it's done you can get rid of the unecessary trailing Xs.
I also looked at your image for handling multi discs, will this group multi discs together in cover flow?
Yes, that's the point.
& when one is playing a multi disc set, will the ipod just go straight to the next disc (disc 2) in playback as though it were one single album?
Yes.
or will playback stop at the last track of disc 1 & then one would have to select disc 2 to play.
No.
Will the multi disc set still come up as 2 different discs to selct to play? I may not want to start with disc 1.
No. You can always chose which track to start playing.
One of the albums I was having trouble with multi covers was part of a 2 disc set, disc 1 was credited to the main artist, but had guest artists for 1/2 the tracks, disc 2 was by the same artist with no guest artists. I have now gotten disc 1 to show as a single cover in cover flow by checking off part of a compilation in the info panel, but it does not appear next to disc 2 in cover flow.
Again setting *Part of a compilation" is the wrong approach. Set *Part of a compilation* to No, put your guest artist info. into the track titles (or any other scheme you choose) and make sure that the Artist value is consistent for all tracks.
on an off note, I notice when I press my ipod button or navigate any of its features, there is a slight grinding noise, I can hear the hard drive, when I bring it close to my ear, it sounds like a chewing mouse is this ok/normal to hear slight noises? it seems to be functioning alright. It is pretty responsive.
Yes, the noise from disc activity is normal. My iPod lives in a silcone sleeve which probably muffles it a bit and most of the time I'll have already have music playing so I'm rarely conscious of the noise of hard drive activity but it is there.
tt2

Shopping for iPod Classic case?

There are too many “case” threads to post this in each one so I am just posting it on its own.
For those of you shopping for an iPod Classic case, here is a short list of URLs I have come up with so far in my quest. I am sure there are many more but this is a start. I can’t recommend any of them as I am still shopping myself. Still, it gives you a chance to shop ‘til you drop.
http://www.difusi.com/
http://www.dlo.com/
http://ifrogz.com/
http://www.iskin.com
http://www.pdostore.com/
http://www.powersupportusa.com/
http://www.xtrememac.com/index.php
http://www.goincase.com/
http://www.marware.com/site/Home.html
http://www.corecases.com/
http://www.contourcase.com/
http://www.covercase.com/
http://www.shieldzone.com/
http://www.pelican-case.com/ipod-cases.html
Good luck on your shopping.

They should add the iPod classic leather cases from CoverCase. It has soft suede lining and for $15, it was the best deal around.

Is the current Ipod classic the 7th generation for sale on apple.uk?

Is the current Ipod classic the 7th generation for sale on apple.uk?

Are you talking about this?
http://store.apple.com/uk/browse/home/shop_ipod/family/ipod_classic
B-rock

I can't open albums recently synced to my iPod Classic 160GB 5th Gen.

My approximately 2.5 year old ipod Classic Gen. 5 recently developed a problem consisting of the inability to open and play recent albums that had been importged into iTunes and then synced to the iPod. The software version on my iPod is 2.0.4 and it had been updated to this level after I activated the iPod shortly after purchasing it in 2010. The version of iTunes on my computer is Version 10.5.3.3 which I installed on 01-25-2012. My Dell Computer XPS Gen 5 has Windows XP SP 3 installed on it as of 05-2009.
The "opening albums" problem has developed since the latest version of iTunes , 10.5.3.3 was installed. My iPod is about 75% full of it's stated capacity of 40, 000 tracks.I have nothing but music on my iPod.
All of my music iwithin iTunes is fully populated with the respective meta data including appropriate album art.
I have attempted several workarounds for this problem, including using the iPod reset routine (moving the HOLD button to the lock position for about 5-10 seconds, moving the Hold button back to the open position, then simultaneously holding the Menu and the Select buttons down until the Apple lkogo appears on the LED). The iPod eventually resumes normal mode and comes back to the Main Menu. This does not solve the problem of specific tracks within an album or playlist not playing.
The second workaround was having the iPod docked rto my computer and to right click the iPod graphc within iTunes which displays the panel which provides iPod identification and capacity statistics, etc. By clicking on the Restore button on this panel a procedure is launched to clear out the existing firmware on the iPod and reset it to that level on the iPod when it came from the factory; my iPod was reset to version.2.0.4. There is eventually a choice to make as to clearing off the existing music and I chose to do so.
One thing I do notice about the tracks that will not play is that they invariably show in the Get Info Summary tab as ID3tag v2.4 and Encoded by LAME3.98.
The bulk of my music reflects ID3Tag v2.3. I read somewhere that ID3Tag type v2.4 has some negative impact on iTunes and subsequently the iPod.. The ID3tag v2.4 offers the opportunity to preload album art within the ID3 tag at a prescribed area of the ID3 tag prior to importing the music tracks into iTunes.
I also read at one of the User Commumnity sites that iTunes began the iCloud concept in the latest version or versions in January 2012. Within the Menu bar at the top of the screen you can left click on the VIEW item and get a drop down list of options. If you left click on the VIEW OPTIONS you will get a panel which provides you a selection of fields to be displayed on your listing.among them being iCLOUD DOWNLOAD and iCLOUD STATUS. I have not subscribed
to the new iCloud service so all my tracks show as WAITING with a clear cloud graphic. Aparently these iCLOUD status indicators must be stored somewhere on the ID3 tag. I hope that the music that I have been impoting to iTunes is not being corrupted by the utilization of the same area for 2 different purpsoses.

Hey you dont need our help, you can help most of us here.
But can you clarify that the problematic Albums does play in iTunes and not in iPod?
I agree with you, it is most likely the ID3Tag v2.4, which may not be implemented correctly, missing iPod software codec, especially the album art tag.
I can only suggest, deleting the Album Art for the album and see if it works.
Have a nice day!

HT3798 Ipod Classic 160 7th Generation - I don't see any settings in the menu. I want to shuffle songs.

I just purchased I IPOD Classic 160 gig 7th generation and when I look at my menu, I have no settings listed. I want to set it to shuffle mode within a genre. Do I need to have this connected to the itunes software for this to show up?
Best Regards
Michael Gould

You need iOS 5 to have iCloud and that requires a 3G or 4G iPod.. You have a 2G iPod and that can only go to iOS 4.2.1.
iCloud: What if my device or computer doesn't meet iCloud system requirements?

Nike+ for iPod Nano 6th/7th gen?

On the Nike+ website it says that I need a nike+ iPod reciever for 6th gen (or earlier) Nanos but that I don't need one for a 7th gen Nano (http://nikeplus.nike.com/plus/home_no_devices).
How can I tell if what I have is a 6th or 7th gen Nano? I can't find any mention of 7th gen on the Apple website.
Thank you.

You don't need it for either year of the 6th Generation.

IPod classic 80GByte (latest gen.): strange cover flow & invisible artists

Hello.
I recognized strange behaviuor on my iPod classic:
1. cover flow: Behind an album named the greatest hits (the correct cover is shown) I can find titles from various artists from their greatest hits album. But when I look up the special album I see only the correct artist.
2. List of artist/search for artists: SOme (at least one) artists seem to be hidden, i.e. I cannot find them in the artists' list or search for them.
On my Mac in iTunes everything works fine - so this does not seem to be the reason.
I already tried a reset with no effect.
What can I do?
regards
bruegge

The Greatest Hits behaviour is a bug/feature of current firmware. All tracks with the same album title are treated as one album. Workaround is to rename to give each album a unique name, e.g. *Greatest Hits, Artist 1*.
Most likely explanation for missing artist is that the tracks of the album are marked as Compilation. The *Sort Artist* value might also have an impact on whether the artist appears where you expect it to.
tt2

Ipod Classic - Case Quality ?

Thinking of replacing my 5th Gen Video Ipod with new 80 GB Classic. How good is the new case ? I have an invisible shield on my current pod for much needed protection. Will I have to shell out more $$ to do the same with the new Classic or have Apple sorted the scratching problem ?

Case top is a matte finished aluminum material. May resist more scratches. Only time will tell - but it will be more difficult to apply, say, the scratch protecting films like DLO makes since it isn't smooth. I have their films on my 5.5Gen unit and, if applied correctly, you can't tell it's there.
I think, at least, you'd want a screen protector for the new classics. Don't know if anyone has announced a line yet at this stage.

IPod classic 160GB 6th gen not sync after HDD & ribbon cable replacement

I recently replaced my iPod 6th gen HDD and ribbon cable, but when I connect it to my PC and iTunes recognizes it, I can't sync or load music to it 'cause it displays an 1439 error, What can I do?

I assume you have tried everything in this article? And I do mean everything.
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
Have you tried restoring it another available Mac or PC to see if the problem persists there?
B-rock

Need software/firmware 1.0.0 to Ipod Classic 80Gb 5-gen

I need the old firmware, the new ones wont work with my dock. Anybody who knows where I can find it?

I agree with Jeff's comment about Pioneer - if they state that the iPod is compatible with their head unit, then they (Pioneer) should support it and not Apple. Again, as Jeff says, how can Apple support every 3rd party product that is produced?
I've just checked the Pioneer web site and although I did not find the AVIC X3-BT that you mentioned, I did find the AVIC-X3 (http://www.pioneer.co.uk/uk/products/archive/AVIC-X3/index.html) and I see that it is only compatible with iPods up to August 2007. It is not listed on the Pioneer.no site, so perhaps it was never available there.
The AVIC-X3-II which *is shown on the Norwegian site* (http://www.pioneer.no/no/products/25/111/241/AVIC-X3-II/specs.html) states that it is compatible with iPods up to September 2007, but specifically excludes the iPod Touch (introduced that month). This is the same month that the original Classic was introduced. So - first thing - work out exactly which model of iPod you have (http://support.apple.com/kb/HT1353). If yours is a Classic, introduced in September 2007, then there may be an issue, but that is up to Pioneer to sort out, perhaps with an update to their product.
I did look for the AVIC-X3-BT on both web sites, but as far as I can tell (with my Norwegian!) it is not there.
I also found a forum specifically about the AVIC X3, at http://www.avicx1forums.com/forum/viewforum.php?f=6 and this post (http://www.avicx1forums.com/forum/viewtopic.php?t=1617) in particular about the Classic not working with the AVIC X3. In his reply, Oliver says that there is a problem with the Classic (at the Pioneer end) and he advises the original poster to contact Pioneer Customer Services by phone.
By the way, your English is better than my Norwegian, I guarantee it!
Med vennlig hilsen,
Phil
Message was edited by: the fiend

Ipod classic 80GB 6th Gen Alarm not playing a Playlist

Is this a software bug? my old iPod Video (5th Gen 30GB, software version 1.3) alarm plays a playlist with no problems.

So what seems to be the problem then? Does iTunes still see the device? If so, just go ahead and sync it as you normally would.
B-rock

Ipod classic 5.5 gen vs 6 gen

What is the difference between the two, if comparing both models with 120 gig capacity? I'm having a hard time trying to figure out which one I should purchase

The previous Classic was available in 80 and 160 GB models in black and silver, the latest is 120Gb in Black (Charcoal) and Silver.
Software wise there doesn't appear to be any difference. THe black of the older 80 & 160 is black black, the newer one is a lighter charcoal black.
It looks unlikely Apple will go beyond the 160GB for the foreseeable future, since they have removed it from their product line up, so if you need a larger storage, as I did for my entire Apple Lossless library, grab yourself a 160 GB while there are still some out there (at reduced prices). If you don't grab a new 120 GB model

IPod Classic case - 7th Gen

Similar Messages

Maybe you are looking for